Experimental research of drilling mud influence on mud motor mechanical rubber components

A. V. Epikhin, A. V. Ushakov, V. V. Barztaikin, V. V. Melnikov, S. Ulyanova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

The paper describes the experimental research of drilling mud influence on engineering parameters of mud motor mechanical rubber components. It is believed to be urgent due to increase in using mud motors in oil and gas well construction now, and, consequently, the issue of increasing their exploitation is becoming current. The development test results of elastomer IRP-1226 dependent on the mud type (alkaline, hydrocarbon or salt- saturated ones) and the temperature are shown in the paper. It is proved that the type of drilling mud and the temperature in bottom-hole zone have an influence on wear of mud motors elastomers.

Original languageEnglish
Title of host publicationIOP Conference Series: Earth and Environmental Science
PublisherInstitute of Physics Publishing
Volume27
Edition1
DOIs
Publication statusPublished - 10 Nov 2015
Event19th International Scientific Symposium on Problems of Geology and Subsurface Development, PGON 2014 - Tomsk, Russian Federation
Duration: 6 Apr 201510 Apr 2015

Other

Other19th International Scientific Symposium on Problems of Geology and Subsurface Development, PGON 2014
CountryRussian Federation
CityTomsk
Period6.4.1510.4.15

ASJC Scopus subject areas

  • Earth and Planetary Sciences(all)
  • Environmental Science(all)

Fingerprint Dive into the research topics of 'Experimental research of drilling mud influence on mud motor mechanical rubber components'. Together they form a unique fingerprint.

  • Cite this

    Epikhin, A. V., Ushakov, A. V., Barztaikin, V. V., Melnikov, V. V., & Ulyanova, S. (2015). Experimental research of drilling mud influence on mud motor mechanical rubber components. In IOP Conference Series: Earth and Environmental Science (1 ed., Vol. 27). [012051] Institute of Physics Publishing. https://doi.org/10.1088/1755-1315/27/1/012051