Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy

Zhanna G. Kovalevskaya, Margarita A. Khimich, Andrey V. Belyakov, Ivan A. Shulepov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

By the results of X-ray analysis, microstructural analysis, nanohardness and elastic modulus measurements it was defined that non-equilibrium phases during the process of crystallization are formed in the titanium-niobium alloy with 40 mass.% of Nb. The minimum of non-equilibrium phases is formed at the Ti-40 mass.% Nb alloy. The uniform grain structure, which consists of β-phase grains with the minimum of elastic modulus, is formed in the alloy ingot. Such structure and complex of properties allows using this alloy for severe plastic deformation.

Original languageEnglish
Title of host publicationAdvanced Materials Research
PublisherTrans Tech Publications Ltd
Pages39-42
Number of pages4
Volume1040
ISBN (Print)9783038352648
DOIs
Publication statusPublished - 2014
EventInternational Conference for Young Scientists “High Technology: Research and Applications 2014”, HTRA 2014 - Tomsk, Russian Federation
Duration: 26 Mar 201428 Mar 2014

Publication series

NameAdvanced Materials Research
Volume1040
ISSN (Print)10226680
ISSN (Electronic)16628985

Other

OtherInternational Conference for Young Scientists “High Technology: Research and Applications 2014”, HTRA 2014
CountryRussian Federation
CityTomsk
Period26.3.1428.3.14

Fingerprint

Physical properties
Mechanical properties
Elastic moduli
Niobium alloys
Nanohardness
Crystal microstructure
X ray analysis
Ingots
Titanium alloys
Plastic deformation
Crystallization

Keywords

  • Crystallization
  • Nanohardness
  • Phase structure
  • Severe plastic deformation
  • Titanium-niobium alloy

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kovalevskaya, Z. G., Khimich, M. A., Belyakov, A. V., & Shulepov, I. A. (2014). Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy. In Advanced Materials Research (Vol. 1040, pp. 39-42). (Advanced Materials Research; Vol. 1040). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMR.1040.39

Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy. / Kovalevskaya, Zhanna G.; Khimich, Margarita A.; Belyakov, Andrey V.; Shulepov, Ivan A.

Advanced Materials Research. Vol. 1040 Trans Tech Publications Ltd, 2014. p. 39-42 (Advanced Materials Research; Vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kovalevskaya, ZG, Khimich, MA, Belyakov, AV & Shulepov, IA 2014, Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy. in Advanced Materials Research. vol. 1040, Advanced Materials Research, vol. 1040, Trans Tech Publications Ltd, pp. 39-42, International Conference for Young Scientists “High Technology: Research and Applications 2014”, HTRA 2014, Tomsk, Russian Federation, 26.3.14. https://doi.org/10.4028/www.scientific.net/AMR.1040.39
Kovalevskaya ZG, Khimich MA, Belyakov AV, Shulepov IA. Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy. In Advanced Materials Research. Vol. 1040. Trans Tech Publications Ltd. 2014. p. 39-42. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.1040.39
Kovalevskaya, Zhanna G. ; Khimich, Margarita A. ; Belyakov, Andrey V. ; Shulepov, Ivan A. / Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy. Advanced Materials Research. Vol. 1040 Trans Tech Publications Ltd, 2014. pp. 39-42 (Advanced Materials Research).
@inproceedings{3abf83edbdc24fa6a1eba3503ca69620,
title = "Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy",
abstract = "By the results of X-ray analysis, microstructural analysis, nanohardness and elastic modulus measurements it was defined that non-equilibrium phases during the process of crystallization are formed in the titanium-niobium alloy with 40 mass.{\%} of Nb. The minimum of non-equilibrium phases is formed at the Ti-40 mass.{\%} Nb alloy. The uniform grain structure, which consists of β-phase grains with the minimum of elastic modulus, is formed in the alloy ingot. Such structure and complex of properties allows using this alloy for severe plastic deformation.",
keywords = "Crystallization, Nanohardness, Phase structure, Severe plastic deformation, Titanium-niobium alloy",
author = "Kovalevskaya, {Zhanna G.} and Khimich, {Margarita A.} and Belyakov, {Andrey V.} and Shulepov, {Ivan A.}",
year = "2014",
doi = "10.4028/www.scientific.net/AMR.1040.39",
language = "English",
isbn = "9783038352648",
volume = "1040",
series = "Advanced Materials Research",
publisher = "Trans Tech Publications Ltd",
pages = "39--42",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy

AU - Kovalevskaya, Zhanna G.

AU - Khimich, Margarita A.

AU - Belyakov, Andrey V.

AU - Shulepov, Ivan A.

PY - 2014

Y1 - 2014

N2 - By the results of X-ray analysis, microstructural analysis, nanohardness and elastic modulus measurements it was defined that non-equilibrium phases during the process of crystallization are formed in the titanium-niobium alloy with 40 mass.% of Nb. The minimum of non-equilibrium phases is formed at the Ti-40 mass.% Nb alloy. The uniform grain structure, which consists of β-phase grains with the minimum of elastic modulus, is formed in the alloy ingot. Such structure and complex of properties allows using this alloy for severe plastic deformation.

AB - By the results of X-ray analysis, microstructural analysis, nanohardness and elastic modulus measurements it was defined that non-equilibrium phases during the process of crystallization are formed in the titanium-niobium alloy with 40 mass.% of Nb. The minimum of non-equilibrium phases is formed at the Ti-40 mass.% Nb alloy. The uniform grain structure, which consists of β-phase grains with the minimum of elastic modulus, is formed in the alloy ingot. Such structure and complex of properties allows using this alloy for severe plastic deformation.

KW - Crystallization

KW - Nanohardness

KW - Phase structure

KW - Severe plastic deformation

KW - Titanium-niobium alloy

UR - http://www.scopus.com/inward/record.url?scp=84913601678&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84913601678&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.1040.39

DO - 10.4028/www.scientific.net/AMR.1040.39

M3 - Conference contribution

SN - 9783038352648

VL - 1040

T3 - Advanced Materials Research

SP - 39

EP - 42

BT - Advanced Materials Research

PB - Trans Tech Publications Ltd

ER -