Abstract
The effect of lignosulfonate on viscosity of organic coal-water-fuel (OCWF) was investigated. Brown coal from "Borodinskoe" deposit, waste oil Motul 8100 X-Clean 5W-30-C3, distilled water and powdered lignosulfonate was used as raw materials for slurry preparation. OCWF viscosity were measured using a rotational viscometer BROOKFIELD DV-II + Pro EXTRA. Optimum lignosulfonate concentration was obtained (1.3-1.4%).
| Original language | English |
|---|---|
| Article number | 01082 |
| Journal | MATEC Web of Conferences |
| Volume | 72 |
| DOIs | |
| Publication status | Published - 9 Aug 2016 |
| Event | Heat and Mass Transfer in the System of Thermal Modes of Energy - Technical and Technological Equipment, HMTTSC 2016 - Tomsk, Russian Federation Duration: 19 Apr 2016 → 21 Apr 2016 |
Fingerprint
ASJC Scopus subject areas
- Chemistry(all)
- Materials Science(all)
- Engineering(all)
Cite this
Evaluation of Effectiveness of Lignosulfonate Application for Organic Coal-Water Fuel Rheological Properties Improvement. / Osipov, Vitaliy; Larionov, Kirill; Matveev, Alexander; Gromov, Alexander.
In: MATEC Web of Conferences, Vol. 72, 01082, 09.08.2016.Research output: Contribution to journal › Conference article
}
TY - JOUR
T1 - Evaluation of Effectiveness of Lignosulfonate Application for Organic Coal-Water Fuel Rheological Properties Improvement
AU - Osipov, Vitaliy
AU - Larionov, Kirill
AU - Matveev, Alexander
AU - Gromov, Alexander
PY - 2016/8/9
Y1 - 2016/8/9
N2 - The effect of lignosulfonate on viscosity of organic coal-water-fuel (OCWF) was investigated. Brown coal from "Borodinskoe" deposit, waste oil Motul 8100 X-Clean 5W-30-C3, distilled water and powdered lignosulfonate was used as raw materials for slurry preparation. OCWF viscosity were measured using a rotational viscometer BROOKFIELD DV-II + Pro EXTRA. Optimum lignosulfonate concentration was obtained (1.3-1.4%).
AB - The effect of lignosulfonate on viscosity of organic coal-water-fuel (OCWF) was investigated. Brown coal from "Borodinskoe" deposit, waste oil Motul 8100 X-Clean 5W-30-C3, distilled water and powdered lignosulfonate was used as raw materials for slurry preparation. OCWF viscosity were measured using a rotational viscometer BROOKFIELD DV-II + Pro EXTRA. Optimum lignosulfonate concentration was obtained (1.3-1.4%).
UR - http://www.scopus.com/inward/record.url?scp=84984645266&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84984645266&partnerID=8YFLogxK
U2 - 10.1051/matecconf/20167201082
DO - 10.1051/matecconf/20167201082
M3 - Conference article
VL - 72
JO - MATEC Web of Conferences
JF - MATEC Web of Conferences
SN - 2261-236X
M1 - 01082
ER -