Estimation of blood clotting in the drip samples using optical methods

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

In this paper the possibility of estimation of the parameters of the blood clotting process using the photometry study of droplet samples is shown. The theoretical justification and results of experimental research using proposed method, the example of determination of prothrombin time are presented. Experimental data were used to analyse shapes of the curves obtained at the studying. Dependence of the curve shape on the location of the radiation detector was also analysed. It was determined that the most informative curves are obtained when the receiver location is in the optical focus of the sample droplet. The possibility of monitoring of the dynamics of the process is demonstrated. The paper presents the advantages of droplet samples using for study of the coagulation process. Proposed method allows to reduce the amount of reagents, to increase sensitivity of the analysis and eliminate the subjective factor.

Original languageEnglish
Title of host publicationProceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Print)9781479962211
DOIs
Publication statusPublished - 15 Dec 2014
Event2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 - Tomsk, Russian Federation
Duration: 16 Oct 201418 Oct 2014

Other

Other2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
CountryRussian Federation
CityTomsk
Period16.10.1418.10.14

    Fingerprint

Keywords

  • blood coagulation
  • drop
  • fibrin clot
  • optical system
  • plasma

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Cite this

Aristov, AA., & Zhoglo, E. V. (2014). Estimation of blood clotting in the drip samples using optical methods. In Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 [6986910] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MEACS.2014.6986910