Engineering support for improving quality of layer-by-layer laser sintering

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

Quality improvement problem has been considered for a laser sintered surface layer. Purposely built experimental setup was decribed together with a four-factor experiment design on laser sintering PMS-1 copper powder. A mathematical model describing the effect of laser sintering process parameters on the surface roughness has been proposed. Practical recommendation for improving the quality of the surface layer is given.

Original languageEnglish
Title of host publicationProceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012
DOIs
Publication statusPublished - 2012
Event2012 7th International Forum on Strategic Technology, IFOST 2012 - Tomsk, Russian Federation
Duration: 18 Sep 201221 Sep 2012

Conference

Conference2012 7th International Forum on Strategic Technology, IFOST 2012
CountryRussian Federation
CityTomsk
Period18.9.1221.9.12

Fingerprint

Sintering
Lasers
Copper powder
Surface roughness
Mathematical models
Laser
Experiments
Process parameters
Factors
Quality improvement
Mathematical model
Copper
Experiment design

Keywords

  • experimental setup
  • layer-by-layer laser sintering
  • sintering regimes
  • surface layer quality

ASJC Scopus subject areas

  • Management of Technology and Innovation

Cite this

Saprykin, A. A., & Saprykina, N. A. (2012). Engineering support for improving quality of layer-by-layer laser sintering. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012 [6357719] https://doi.org/10.1109/IFOST.2012.6357719

Engineering support for improving quality of layer-by-layer laser sintering. / Saprykin, Alexander Alexandrovich; Saprykina, N. A.

Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357719.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Saprykin, AA & Saprykina, NA 2012, Engineering support for improving quality of layer-by-layer laser sintering. in Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012., 6357719, 2012 7th International Forum on Strategic Technology, IFOST 2012, Tomsk, Russian Federation, 18.9.12. https://doi.org/10.1109/IFOST.2012.6357719
Saprykin AA, Saprykina NA. Engineering support for improving quality of layer-by-layer laser sintering. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357719 https://doi.org/10.1109/IFOST.2012.6357719
Saprykin, Alexander Alexandrovich ; Saprykina, N. A. / Engineering support for improving quality of layer-by-layer laser sintering. Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012.
@inproceedings{f67d0622b1a04ccd85b9a289dcb5bba9,
title = "Engineering support for improving quality of layer-by-layer laser sintering",
abstract = "Quality improvement problem has been considered for a laser sintered surface layer. Purposely built experimental setup was decribed together with a four-factor experiment design on laser sintering PMS-1 copper powder. A mathematical model describing the effect of laser sintering process parameters on the surface roughness has been proposed. Practical recommendation for improving the quality of the surface layer is given.",
keywords = "experimental setup, layer-by-layer laser sintering, sintering regimes, surface layer quality",
author = "Saprykin, {Alexander Alexandrovich} and Saprykina, {N. A.}",
year = "2012",
doi = "10.1109/IFOST.2012.6357719",
language = "English",
isbn = "9781467317702",
booktitle = "Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012",

}

TY - GEN

T1 - Engineering support for improving quality of layer-by-layer laser sintering

AU - Saprykin, Alexander Alexandrovich

AU - Saprykina, N. A.

PY - 2012

Y1 - 2012

N2 - Quality improvement problem has been considered for a laser sintered surface layer. Purposely built experimental setup was decribed together with a four-factor experiment design on laser sintering PMS-1 copper powder. A mathematical model describing the effect of laser sintering process parameters on the surface roughness has been proposed. Practical recommendation for improving the quality of the surface layer is given.

AB - Quality improvement problem has been considered for a laser sintered surface layer. Purposely built experimental setup was decribed together with a four-factor experiment design on laser sintering PMS-1 copper powder. A mathematical model describing the effect of laser sintering process parameters on the surface roughness has been proposed. Practical recommendation for improving the quality of the surface layer is given.

KW - experimental setup

KW - layer-by-layer laser sintering

KW - sintering regimes

KW - surface layer quality

UR - http://www.scopus.com/inward/record.url?scp=84871833323&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871833323&partnerID=8YFLogxK

U2 - 10.1109/IFOST.2012.6357719

DO - 10.1109/IFOST.2012.6357719

M3 - Conference contribution

SN - 9781467317702

BT - Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012

ER -