Electropulse treatment of water solution of humic substances in a layer iron granules in process of water treatment

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The present work is a part of a continuations study of the physical and chemical processes complex in natural waters containing humic-type organic substances at the influence of pulsed electrical discharges in a layer of iron pellets. The study of humic substances processing in the iron granules layer by means of pulsed electric discharge for the purpose of water purification from organic compounds humic origin from natural water of the northern regions of Russia is relevant for the water treatment technologies. In case of molar humate sodium - iron ions (II) at the ratio 2:3, reduction of solution colour and chemical oxygen demand occur due to the humate sodium ions and iron (II) participation in oxidation-reduction reactions followed by coagulation insoluble compounds formation at a pH of 6.5. In order to achieve this molar ratio and the time of pulsed electric discharge, equal to 10 seconds is experimentally identified. The role of secondary processes that occur after disconnection of the discharge is shown. The time of contact in active erosion products with sodium humate, equal to 1 hour is established. During this time, the value of permanganate oxidation and iron concentration in solution achieves the value of maximum permissible concentrations and further contact time increase does not lead to the controlled parameters change.

Original languageEnglish
Article number012098
JournalIOP Conference Series: Materials Science and Engineering
Volume110
Issue number1
DOIs
Publication statusPublished - 23 Feb 2016

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this