Electronic loading of superconducting microwave resonators

S. N. Artemenko, V. L. Kaminskiy, G. N. Samoylenko

Research output: Contribution to journalArticle

Abstract

This paper presents the results of an experimental study of the electronic loading of high-Q superconducting resonators (SCR) for the 10-centimeter microwave band. The effect of technological factors on the field emission current and the parameters of the emitters is investigated. It is shown that for comparable microwave field levels the intensity of the electronic loading of the resonators, fabricated using the 'cold' technology, is considerably lower than in SCR fabricated using high-temperature annealing. The existence regions of resonant high-frequency discharge (RHFD) and their dynamics in the course of an increase in the voltage across the resonator are investigated. It is shown that the components of air and cryogenic residues, adsorbed by the superconductor surface, play an important role in the appearance of RHFD in SCR.

Original languageEnglish
Pages (from-to)107-112
Number of pages6
JournalSoviet journal of communications technology & electronics
Volume33
Issue number5
Publication statusPublished - May 1988

Fingerprint

Superconducting resonators
Microwave resonators
Resonators
Microwaves
Field emission
Cryogenics
Superconducting materials
Annealing
Electric potential
Air
Temperature

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Electronic loading of superconducting microwave resonators. / Artemenko, S. N.; Kaminskiy, V. L.; Samoylenko, G. N.

In: Soviet journal of communications technology & electronics, Vol. 33, No. 5, 05.1988, p. 107-112.

Research output: Contribution to journalArticle

@article{4771f9252c8b4efd8ad492b153804897,
title = "Electronic loading of superconducting microwave resonators",
abstract = "This paper presents the results of an experimental study of the electronic loading of high-Q superconducting resonators (SCR) for the 10-centimeter microwave band. The effect of technological factors on the field emission current and the parameters of the emitters is investigated. It is shown that for comparable microwave field levels the intensity of the electronic loading of the resonators, fabricated using the 'cold' technology, is considerably lower than in SCR fabricated using high-temperature annealing. The existence regions of resonant high-frequency discharge (RHFD) and their dynamics in the course of an increase in the voltage across the resonator are investigated. It is shown that the components of air and cryogenic residues, adsorbed by the superconductor surface, play an important role in the appearance of RHFD in SCR.",
author = "Artemenko, {S. N.} and Kaminskiy, {V. L.} and Samoylenko, {G. N.}",
year = "1988",
month = "5",
language = "English",
volume = "33",
pages = "107--112",
journal = "Soviet journal of communications technology & electronics",
issn = "8756-6648",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "5",

}

TY - JOUR

T1 - Electronic loading of superconducting microwave resonators

AU - Artemenko, S. N.

AU - Kaminskiy, V. L.

AU - Samoylenko, G. N.

PY - 1988/5

Y1 - 1988/5

N2 - This paper presents the results of an experimental study of the electronic loading of high-Q superconducting resonators (SCR) for the 10-centimeter microwave band. The effect of technological factors on the field emission current and the parameters of the emitters is investigated. It is shown that for comparable microwave field levels the intensity of the electronic loading of the resonators, fabricated using the 'cold' technology, is considerably lower than in SCR fabricated using high-temperature annealing. The existence regions of resonant high-frequency discharge (RHFD) and their dynamics in the course of an increase in the voltage across the resonator are investigated. It is shown that the components of air and cryogenic residues, adsorbed by the superconductor surface, play an important role in the appearance of RHFD in SCR.

AB - This paper presents the results of an experimental study of the electronic loading of high-Q superconducting resonators (SCR) for the 10-centimeter microwave band. The effect of technological factors on the field emission current and the parameters of the emitters is investigated. It is shown that for comparable microwave field levels the intensity of the electronic loading of the resonators, fabricated using the 'cold' technology, is considerably lower than in SCR fabricated using high-temperature annealing. The existence regions of resonant high-frequency discharge (RHFD) and their dynamics in the course of an increase in the voltage across the resonator are investigated. It is shown that the components of air and cryogenic residues, adsorbed by the superconductor surface, play an important role in the appearance of RHFD in SCR.

UR - http://www.scopus.com/inward/record.url?scp=0024002153&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024002153&partnerID=8YFLogxK

M3 - Article

VL - 33

SP - 107

EP - 112

JO - Soviet journal of communications technology & electronics

JF - Soviet journal of communications technology & electronics

SN - 8756-6648

IS - 5

ER -