Electrochemical investigations of reactive dyes; cathodic stripping voltammetric determination of anthraquinone-based chlorotriazine dyes at a hanging mercury drop electrode

M. V.B. Zanoni, A. G. Fogg, J. Barek, J. Zima

Research output: Contribution to journalArticle

35 Citations (Scopus)

Abstract

Two anthraquinone-based chlorotriazine reactive dyes, Procion Blue MX-R and Cibacron Blue 3GA, have been determined at nanomolar levels using cathodic stripping voltammetry. When the differential pulse voltammetric stripping mode is used no peak is obtained for the reduction of the anthraquinone moiety in these dyes, although the signal is present when the linear sweep mode is used. The absence of this peak in the differential pulse mode is believed to occur because, when this group is reduced in the adsorbed state on application of the potential pulse, it is reduced so rapidly that reduction is complete before the current is monitored at the end of the pulse. The differential pulse signal is present for the reduction of the chlorotriazine active groups. The differential pulse peak for the anthraquinone reduction process does appear when boric acid is present in the supporting electrolyte, and it is also present when the chlorotriazine groups are hydrolysed or reacted with other hydroxy compounds. This means that hydrolysis or similar reactions of these dyes can be monitored by observing both the appearance of the anthraquinone peak and the disappearance of the chlorotriazine peak.

Original languageEnglish
Pages (from-to)101-109
Number of pages9
JournalAnalytica Chimica Acta
Volume349
Issue number1-3
DOIs
Publication statusPublished - 29 Aug 1997
Externally publishedYes

Fingerprint

Anthraquinones
Mercury
dye
Electrodes
electrode
Coloring Agents
Voltammetry
electrolyte
Electrolytes
hydrolysis
Hydrolysis
mercury
acid

Keywords

  • Anthraquinone reactive dyes
  • Cathodic stripping voltammetry
  • Chlorotriazine group
  • Reactive dye hydrolysis

ASJC Scopus subject areas

  • Analytical Chemistry
  • Environmental Chemistry
  • Biochemistry
  • Spectroscopy

Cite this

Electrochemical investigations of reactive dyes; cathodic stripping voltammetric determination of anthraquinone-based chlorotriazine dyes at a hanging mercury drop electrode. / Zanoni, M. V.B.; Fogg, A. G.; Barek, J.; Zima, J.

In: Analytica Chimica Acta, Vol. 349, No. 1-3, 29.08.1997, p. 101-109.

Research output: Contribution to journalArticle

@article{2b8c53b99c624de1ab50f4e53aa54c82,
title = "Electrochemical investigations of reactive dyes; cathodic stripping voltammetric determination of anthraquinone-based chlorotriazine dyes at a hanging mercury drop electrode",
abstract = "Two anthraquinone-based chlorotriazine reactive dyes, Procion Blue MX-R and Cibacron Blue 3GA, have been determined at nanomolar levels using cathodic stripping voltammetry. When the differential pulse voltammetric stripping mode is used no peak is obtained for the reduction of the anthraquinone moiety in these dyes, although the signal is present when the linear sweep mode is used. The absence of this peak in the differential pulse mode is believed to occur because, when this group is reduced in the adsorbed state on application of the potential pulse, it is reduced so rapidly that reduction is complete before the current is monitored at the end of the pulse. The differential pulse signal is present for the reduction of the chlorotriazine active groups. The differential pulse peak for the anthraquinone reduction process does appear when boric acid is present in the supporting electrolyte, and it is also present when the chlorotriazine groups are hydrolysed or reacted with other hydroxy compounds. This means that hydrolysis or similar reactions of these dyes can be monitored by observing both the appearance of the anthraquinone peak and the disappearance of the chlorotriazine peak.",
keywords = "Anthraquinone reactive dyes, Cathodic stripping voltammetry, Chlorotriazine group, Reactive dye hydrolysis",
author = "Zanoni, {M. V.B.} and Fogg, {A. G.} and J. Barek and J. Zima",
year = "1997",
month = "8",
day = "29",
doi = "10.1016/S0003-2670(97)00268-7",
language = "English",
volume = "349",
pages = "101--109",
journal = "Analytica Chimica Acta",
issn = "0003-2670",
publisher = "Elsevier",
number = "1-3",

}

TY - JOUR

T1 - Electrochemical investigations of reactive dyes; cathodic stripping voltammetric determination of anthraquinone-based chlorotriazine dyes at a hanging mercury drop electrode

AU - Zanoni, M. V.B.

AU - Fogg, A. G.

AU - Barek, J.

AU - Zima, J.

PY - 1997/8/29

Y1 - 1997/8/29

N2 - Two anthraquinone-based chlorotriazine reactive dyes, Procion Blue MX-R and Cibacron Blue 3GA, have been determined at nanomolar levels using cathodic stripping voltammetry. When the differential pulse voltammetric stripping mode is used no peak is obtained for the reduction of the anthraquinone moiety in these dyes, although the signal is present when the linear sweep mode is used. The absence of this peak in the differential pulse mode is believed to occur because, when this group is reduced in the adsorbed state on application of the potential pulse, it is reduced so rapidly that reduction is complete before the current is monitored at the end of the pulse. The differential pulse signal is present for the reduction of the chlorotriazine active groups. The differential pulse peak for the anthraquinone reduction process does appear when boric acid is present in the supporting electrolyte, and it is also present when the chlorotriazine groups are hydrolysed or reacted with other hydroxy compounds. This means that hydrolysis or similar reactions of these dyes can be monitored by observing both the appearance of the anthraquinone peak and the disappearance of the chlorotriazine peak.

AB - Two anthraquinone-based chlorotriazine reactive dyes, Procion Blue MX-R and Cibacron Blue 3GA, have been determined at nanomolar levels using cathodic stripping voltammetry. When the differential pulse voltammetric stripping mode is used no peak is obtained for the reduction of the anthraquinone moiety in these dyes, although the signal is present when the linear sweep mode is used. The absence of this peak in the differential pulse mode is believed to occur because, when this group is reduced in the adsorbed state on application of the potential pulse, it is reduced so rapidly that reduction is complete before the current is monitored at the end of the pulse. The differential pulse signal is present for the reduction of the chlorotriazine active groups. The differential pulse peak for the anthraquinone reduction process does appear when boric acid is present in the supporting electrolyte, and it is also present when the chlorotriazine groups are hydrolysed or reacted with other hydroxy compounds. This means that hydrolysis or similar reactions of these dyes can be monitored by observing both the appearance of the anthraquinone peak and the disappearance of the chlorotriazine peak.

KW - Anthraquinone reactive dyes

KW - Cathodic stripping voltammetry

KW - Chlorotriazine group

KW - Reactive dye hydrolysis

UR - http://www.scopus.com/inward/record.url?scp=0030757776&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030757776&partnerID=8YFLogxK

U2 - 10.1016/S0003-2670(97)00268-7

DO - 10.1016/S0003-2670(97)00268-7

M3 - Article

VL - 349

SP - 101

EP - 109

JO - Analytica Chimica Acta

JF - Analytica Chimica Acta

SN - 0003-2670

IS - 1-3

ER -