Electric transfer elementary processes

Polyvalent computer investigation in materials filled with disperse powders

V. Ya Ushakov, N. N. Minakova, I. I. Skvirskaya

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Electric transfer simulation in composite materials is usually based on the consideration, as a rule, of one of the process sides. However, to design an adequate model it is necessary to investigate the system of polyvalent objects under the complex influence of geometric, probabilistic, physical and chemical factors on different levels of organization. Computer models are suggested, developed and approved as a new approach to solving this problem, i.e. on the simplified level to take into account random and nonlinear effects when electric transfer considered. Computational experiments were performed with the application of a computer model of the medium composition and a calculated model of analysis of material behavior while heated in contact with a corrosive medium. The following were taken as deterministic parameters: initial particle diameter, diameter of agglomerate, the portion of exfoliating particles being treated, particle density. The random constituent was simulated by choosing a random distribution law of particles in the volume of the medium with variable dispersion.

Original languageEnglish
Title of host publicationProceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages333-336
Number of pages4
Volume3
ISBN (Print)0780364864, 9780780364868
DOIs
Publication statusPublished - 2000
Event4th Korea-Russia International Symposium on Science and Technology, KORUS 2000 - Ulsan, Korea, Republic of
Duration: 27 Jun 20001 Jul 2000

Other

Other4th Korea-Russia International Symposium on Science and Technology, KORUS 2000
CountryKorea, Republic of
CityUlsan
Period27.6.001.7.00

Fingerprint

Computer Simulation
Powders
Caustics
Transfer (Psychology)
Composite materials
Chemical analysis
Experiments

Keywords

  • computer model
  • electric transfer
  • geometry of disperses filler
  • heterogeneous system
  • operation regime

ASJC Scopus subject areas

  • Clinical Biochemistry
  • Computer Networks and Communications
  • Biotechnology
  • Civil and Structural Engineering
  • Mechanics of Materials
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Surfaces, Coatings and Films

Cite this

Ushakov, V. Y., Minakova, N. N., & Skvirskaya, I. I. (2000). Electric transfer elementary processes: Polyvalent computer investigation in materials filled with disperse powders. In Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology (Vol. 3, pp. 333-336). [866109] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/KORUS.2000.866109

Electric transfer elementary processes : Polyvalent computer investigation in materials filled with disperse powders. / Ushakov, V. Ya; Minakova, N. N.; Skvirskaya, I. I.

Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Vol. 3 Institute of Electrical and Electronics Engineers Inc., 2000. p. 333-336 866109.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ushakov, VY, Minakova, NN & Skvirskaya, II 2000, Electric transfer elementary processes: Polyvalent computer investigation in materials filled with disperse powders. in Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. vol. 3, 866109, Institute of Electrical and Electronics Engineers Inc., pp. 333-336, 4th Korea-Russia International Symposium on Science and Technology, KORUS 2000, Ulsan, Korea, Republic of, 27.6.00. https://doi.org/10.1109/KORUS.2000.866109
Ushakov VY, Minakova NN, Skvirskaya II. Electric transfer elementary processes: Polyvalent computer investigation in materials filled with disperse powders. In Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Vol. 3. Institute of Electrical and Electronics Engineers Inc. 2000. p. 333-336. 866109 https://doi.org/10.1109/KORUS.2000.866109
Ushakov, V. Ya ; Minakova, N. N. ; Skvirskaya, I. I. / Electric transfer elementary processes : Polyvalent computer investigation in materials filled with disperse powders. Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Vol. 3 Institute of Electrical and Electronics Engineers Inc., 2000. pp. 333-336
@inproceedings{05a18fc55aa9419491e75ced1ca9ac88,
title = "Electric transfer elementary processes: Polyvalent computer investigation in materials filled with disperse powders",
abstract = "Electric transfer simulation in composite materials is usually based on the consideration, as a rule, of one of the process sides. However, to design an adequate model it is necessary to investigate the system of polyvalent objects under the complex influence of geometric, probabilistic, physical and chemical factors on different levels of organization. Computer models are suggested, developed and approved as a new approach to solving this problem, i.e. on the simplified level to take into account random and nonlinear effects when electric transfer considered. Computational experiments were performed with the application of a computer model of the medium composition and a calculated model of analysis of material behavior while heated in contact with a corrosive medium. The following were taken as deterministic parameters: initial particle diameter, diameter of agglomerate, the portion of exfoliating particles being treated, particle density. The random constituent was simulated by choosing a random distribution law of particles in the volume of the medium with variable dispersion.",
keywords = "computer model, electric transfer, geometry of disperses filler, heterogeneous system, operation regime",
author = "Ushakov, {V. Ya} and Minakova, {N. N.} and Skvirskaya, {I. I.}",
year = "2000",
doi = "10.1109/KORUS.2000.866109",
language = "English",
isbn = "0780364864",
volume = "3",
pages = "333--336",
booktitle = "Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Electric transfer elementary processes

T2 - Polyvalent computer investigation in materials filled with disperse powders

AU - Ushakov, V. Ya

AU - Minakova, N. N.

AU - Skvirskaya, I. I.

PY - 2000

Y1 - 2000

N2 - Electric transfer simulation in composite materials is usually based on the consideration, as a rule, of one of the process sides. However, to design an adequate model it is necessary to investigate the system of polyvalent objects under the complex influence of geometric, probabilistic, physical and chemical factors on different levels of organization. Computer models are suggested, developed and approved as a new approach to solving this problem, i.e. on the simplified level to take into account random and nonlinear effects when electric transfer considered. Computational experiments were performed with the application of a computer model of the medium composition and a calculated model of analysis of material behavior while heated in contact with a corrosive medium. The following were taken as deterministic parameters: initial particle diameter, diameter of agglomerate, the portion of exfoliating particles being treated, particle density. The random constituent was simulated by choosing a random distribution law of particles in the volume of the medium with variable dispersion.

AB - Electric transfer simulation in composite materials is usually based on the consideration, as a rule, of one of the process sides. However, to design an adequate model it is necessary to investigate the system of polyvalent objects under the complex influence of geometric, probabilistic, physical and chemical factors on different levels of organization. Computer models are suggested, developed and approved as a new approach to solving this problem, i.e. on the simplified level to take into account random and nonlinear effects when electric transfer considered. Computational experiments were performed with the application of a computer model of the medium composition and a calculated model of analysis of material behavior while heated in contact with a corrosive medium. The following were taken as deterministic parameters: initial particle diameter, diameter of agglomerate, the portion of exfoliating particles being treated, particle density. The random constituent was simulated by choosing a random distribution law of particles in the volume of the medium with variable dispersion.

KW - computer model

KW - electric transfer

KW - geometry of disperses filler

KW - heterogeneous system

KW - operation regime

UR - http://www.scopus.com/inward/record.url?scp=84960914162&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960914162&partnerID=8YFLogxK

U2 - 10.1109/KORUS.2000.866109

DO - 10.1109/KORUS.2000.866109

M3 - Conference contribution

SN - 0780364864

SN - 9780780364868

VL - 3

SP - 333

EP - 336

BT - Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology

PB - Institute of Electrical and Electronics Engineers Inc.

ER -