Electric arc surfacing on low carbon steel: Structure and properties

Yury Fedorovich Ivanov, Victor Gromov, Vasilii Kormyshev, Sergey Konovalov, Evgenii Kapralov, Alexander Semin

Research Center for Physical Materials Science and Composite Materials

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe₂B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

Original language	English
Title of host publication	Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Subtitle of host publication	Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publisher	American Institute of Physics Inc.
Volume	1783
ISBN (Electronic)	9780735414457
DOIs	https://doi.org/10.1063/1.4966370
Publication status	Published - 10 Nov 2016
Event	International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Russian Federation Duration: 19 Sep 2016 → 23 Sep 2016

Conference

Conference	International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Country	Russian Federation
City	Tomsk
Period	19.9.16 → 23.9.16

Fingerprint

ASJC Scopus subject areas

Physics and Astronomy(all)

Cite this

Ivanov, Y. F., Gromov, V., Kormyshev, V., Konovalov, S., Kapralov, E., & Semin, A. (2016). Electric arc surfacing on low carbon steel: Structure and properties. In Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 (Vol. 1783). [020077] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966370

Electric arc surfacing on low carbon steel : Structure and properties. / Ivanov, Yury Fedorovich; Gromov, Victor; Kormyshev, Vasilii; Konovalov, Sergey; Kapralov, Evgenii; Semin, Alexander.

Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783 American Institute of Physics Inc., 2016. 020077.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ivanov, YF, Gromov, V, Kormyshev, V, Konovalov, S, Kapralov, E & Semin, A 2016, Electric arc surfacing on low carbon steel: Structure and properties. in Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. vol. 1783, 020077, American Institute of Physics Inc., International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016, Tomsk, Russian Federation, 19.9.16. https://doi.org/10.1063/1.4966370

Ivanov YF, Gromov V, Kormyshev V, Konovalov S, Kapralov E, Semin A. Electric arc surfacing on low carbon steel: Structure and properties. In Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783. American Institute of Physics Inc. 2016. 020077 https://doi.org/10.1063/1.4966370

Ivanov, Yury Fedorovich ; Gromov, Victor ; Kormyshev, Vasilii ; Konovalov, Sergey ; Kapralov, Evgenii ; Semin, Alexander. / Electric arc surfacing on low carbon steel : Structure and properties. Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783 American Institute of Physics Inc., 2016.

@inproceedings{6d50356161a244f8bdf6ba460f095232,

title = "Electric arc surfacing on low carbon steel: Structure and properties",

abstract = "By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.",

author = "Ivanov, {Yury Fedorovich} and Victor Gromov and Vasilii Kormyshev and Sergey Konovalov and Evgenii Kapralov and Alexander Semin",

year = "2016",

month = nov

day = "10",

doi = "10.1063/1.4966370",

language = "English",

volume = "1783",

booktitle = "Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016",

publisher = "American Institute of Physics Inc.",

note = "International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 ; Conference date: 19-09-2016 Through 23-09-2016",

}

TY - GEN

T1 - Electric arc surfacing on low carbon steel

T2 - International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016

AU - Ivanov, Yury Fedorovich

AU - Gromov, Victor

AU - Kormyshev, Vasilii

AU - Konovalov, Sergey

AU - Kapralov, Evgenii

AU - Semin, Alexander

PY - 2016/11/10

Y1 - 2016/11/10

N2 - By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

AB - By the methods of modern materials science, the structure-phase state and microhardness distribution along the cross-section of single and double coatings surfaced on martensite low carbon steel by alloy powder-cored wire were studied. It was established that the increased mechanical properties of surfaced layer are determined by the sub-micro and nanodispersed martensite structure formation, containing iron borides forming the eutectic of lamellar form. The plates of Fe2B are formed mainly in the eutectic of a single-surfaced layer, while FeB is formed in a double-surfaced layer. The existence of bend extinction contours indicating the internal stress fields formation at the boundaries of Fe borides-α-Fe phases were revealed.

UR - http://www.scopus.com/inward/record.url?scp=85005980989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85005980989&partnerID=8YFLogxK

U2 - 10.1063/1.4966370

DO - 10.1063/1.4966370

M3 - Conference contribution

AN - SCOPUS:85005980989

VL - 1783

BT - Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016

PB - American Institute of Physics Inc.

Y2 - 19 September 2016 through 23 September 2016

ER -

Access to Document

10.1063/1.4966370