Effect of the heat flux density on the evaporation rate of a distilled water drop

Research output: Contribution to journalConference article

10 Citations (Scopus)

Abstract

This paper presents the experimental dependence of the evaporation rate of a nondeaerated distilled water drop from the heat flux density on the surfaces of non-ferrous metals (copper and brass). A drop was placed on a heated substrate by electronic dosing device. To obtain drop profile we use a shadow optical system; drop symmetry was controlled by a high-speed video camera. It was found that the evaporation rate of a drop on a copper substrate is greater than on a brass. The evaporation rate increases intensively with raising volume of a drop. Calculated values of the heat flux density and the corresponding evaporation rates are presented in this work. The evaporation rate is found to increase intensively on the brass substrate with raising the heat flux density.

Original languageEnglish
Article number01060
JournalEPJ Web of Conferences
Volume110
DOIs
Publication statusPublished - 23 Feb 2016
EventThermophysical Basis of Energy Technologies 2015 - Tomsk, Russian Federation
Duration: 13 Oct 201515 Oct 2015

    Fingerprint

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this