Abstract
TiN and TiAlN coatings were deposited on CoCr alloy, 316L stainless steel, and Si substrates by cathodic arc method. Various ion bombardment conditions were obtained by different DC and pulsed bias voltages applied on the substrates. A comparative analysis of the coating characteristics for different substrate biasing conditions was performed.
| Original language | English |
|---|---|
| Journal | Plasma Processes and Polymers |
| Volume | 4 |
| Issue number | SUPPL.1 |
| DOIs | |
| Publication status | Published - 1 Dec 2007 |
| Externally published | Yes |
Fingerprint
Keywords
- Cathodic arc deposition
- DC and pulsed bias
- Mechanical characteristics
- TiN and TiA1N
- Wear-corrosion resistance
ASJC Scopus subject areas
- Condensed Matter Physics
- Polymers and Plastics
Cite this
Effect of ion bombardment on the characteristics of Ti based biocompatible coatings. / Vladescu, Alina; Balaceanu, Mihai; Braic, Viorel; Cotrut, Cosmin Mihai; Kiss, Adrian; Braic, Mariana.
In: Plasma Processes and Polymers, Vol. 4, No. SUPPL.1, 01.12.2007.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Effect of ion bombardment on the characteristics of Ti based biocompatible coatings
AU - Vladescu, Alina
AU - Balaceanu, Mihai
AU - Braic, Viorel
AU - Cotrut, Cosmin Mihai
AU - Kiss, Adrian
AU - Braic, Mariana
PY - 2007/12/1
Y1 - 2007/12/1
N2 - TiN and TiAlN coatings were deposited on CoCr alloy, 316L stainless steel, and Si substrates by cathodic arc method. Various ion bombardment conditions were obtained by different DC and pulsed bias voltages applied on the substrates. A comparative analysis of the coating characteristics for different substrate biasing conditions was performed.
AB - TiN and TiAlN coatings were deposited on CoCr alloy, 316L stainless steel, and Si substrates by cathodic arc method. Various ion bombardment conditions were obtained by different DC and pulsed bias voltages applied on the substrates. A comparative analysis of the coating characteristics for different substrate biasing conditions was performed.
KW - Cathodic arc deposition
KW - DC and pulsed bias
KW - Mechanical characteristics
KW - TiN and TiA1N
KW - Wear-corrosion resistance
UR - http://www.scopus.com/inward/record.url?scp=70349410395&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=70349410395&partnerID=8YFLogxK
U2 - 10.1002/ppap.200731009
DO - 10.1002/ppap.200731009
M3 - Article
AN - SCOPUS:70349410395
VL - 4
JO - Plasma Processes and Polymers
JF - Plasma Processes and Polymers
SN - 1612-8850
IS - SUPPL.1
ER -