Effect of gas mixture composition and pump conditions on the parameters of the CuBr - Ne - H2 (HBr) laser

D. V. Shiyanov, G. S. Evtushenko, V. B. Sukhanov, V. F. Fedorov

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

The optimal pressures of the active H2, HBr impurities and the working substance (copper bromide) for an effective operation of the CuBr laser are determined experimentally. It is shown that to achieve the highest output laser parameters by increasing the voltage across the gas-discharge tube and the pump pulse repetition rate, it is also necessary to increase the amount of the impurity introduced. At the same time, the optimal pressure of copper bromide decreases with increasing the pulse repetition rate.

Original languageEnglish
Pages (from-to)49-52
Number of pages4
JournalQuantum Electronics
Volume37
Issue number1
DOIs
Publication statusPublished - Jan 2007

Fingerprint

Pulse repetition rate
pulse repetition rate
Bromides
Gas mixtures
gas mixtures
bromides
Copper
Pumps
Impurities
pumps
Gas discharge tubes
copper
impurities
gas discharge tubes
Lasers
laser outputs
Chemical analysis
lasers
Electric potential
electric potential

Keywords

  • Active impurity
  • Copper bromide vapour laser
  • Pump conditions

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Physics and Astronomy (miscellaneous)

Cite this

Effect of gas mixture composition and pump conditions on the parameters of the CuBr - Ne - H2 (HBr) laser. / Shiyanov, D. V.; Evtushenko, G. S.; Sukhanov, V. B.; Fedorov, V. F.

In: Quantum Electronics, Vol. 37, No. 1, 01.2007, p. 49-52.

Research output: Contribution to journalArticle

@article{bace28da78f9426c95b7f33b14811591,
title = "Effect of gas mixture composition and pump conditions on the parameters of the CuBr - Ne - H2 (HBr) laser",
abstract = "The optimal pressures of the active H2, HBr impurities and the working substance (copper bromide) for an effective operation of the CuBr laser are determined experimentally. It is shown that to achieve the highest output laser parameters by increasing the voltage across the gas-discharge tube and the pump pulse repetition rate, it is also necessary to increase the amount of the impurity introduced. At the same time, the optimal pressure of copper bromide decreases with increasing the pulse repetition rate.",
keywords = "Active impurity, Copper bromide vapour laser, Pump conditions",
author = "Shiyanov, {D. V.} and Evtushenko, {G. S.} and Sukhanov, {V. B.} and Fedorov, {V. F.}",
year = "2007",
month = "1",
doi = "10.1070/QE2007v037n01ABEH013217",
language = "English",
volume = "37",
pages = "49--52",
journal = "Quantum Electronics",
issn = "1063-7818",
publisher = "Turpion Ltd.",
number = "1",

}

TY - JOUR

T1 - Effect of gas mixture composition and pump conditions on the parameters of the CuBr - Ne - H2 (HBr) laser

AU - Shiyanov, D. V.

AU - Evtushenko, G. S.

AU - Sukhanov, V. B.

AU - Fedorov, V. F.

PY - 2007/1

Y1 - 2007/1

N2 - The optimal pressures of the active H2, HBr impurities and the working substance (copper bromide) for an effective operation of the CuBr laser are determined experimentally. It is shown that to achieve the highest output laser parameters by increasing the voltage across the gas-discharge tube and the pump pulse repetition rate, it is also necessary to increase the amount of the impurity introduced. At the same time, the optimal pressure of copper bromide decreases with increasing the pulse repetition rate.

AB - The optimal pressures of the active H2, HBr impurities and the working substance (copper bromide) for an effective operation of the CuBr laser are determined experimentally. It is shown that to achieve the highest output laser parameters by increasing the voltage across the gas-discharge tube and the pump pulse repetition rate, it is also necessary to increase the amount of the impurity introduced. At the same time, the optimal pressure of copper bromide decreases with increasing the pulse repetition rate.

KW - Active impurity

KW - Copper bromide vapour laser

KW - Pump conditions

UR - http://www.scopus.com/inward/record.url?scp=34147195925&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34147195925&partnerID=8YFLogxK

U2 - 10.1070/QE2007v037n01ABEH013217

DO - 10.1070/QE2007v037n01ABEH013217

M3 - Article

AN - SCOPUS:34147195925

VL - 37

SP - 49

EP - 52

JO - Quantum Electronics

JF - Quantum Electronics

SN - 1063-7818

IS - 1

ER -