Effect of electronic modification on nanostructures stability to degradation

Kozlovskiy, I. Kenzhina, Kaikanov, A. Stepanov, V. Shamanin, Zdorovets, Tikhonov

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

One of the ways to improve the corrosion resistance of nanomaterials is the use of ionizing radiation for directional modification of structural properties. The paper presents results of directional modification of nanostructures using flows of low-energy electrons to change the structural properties of Cu nanotubes. Also, we present the dependence of the degradation degree in various aggressive media and time in a medium. The greatest deterioration in crystallographic characteristics of unmodified nanostructures in corrosive media is observed on the day 10th, which is due to partial destruction of the crystal structure as a result of oxidation processes. Also, an increase in the oxygen concentration in the structure leads to an increase in disorder regions, amorphization, and subsequent destruction of samples. Modified nanostructures exhibit a low rate of degradation. It is caused by a change in defects concentration after modification by an electron beam. Such a modification leads to an improvement in structural properties, a decrease in amorphous inclusions, and an increase in materials resistibility to corrosion and degradation. Analysis of the kinetics of structure failure as a result of aggressive media influence on the crystal structure of nanotubes showed that in the case of preliminary modification of nanotubes by an electron beam, nanostructures stability to degradation increases 8.33 times, which is confirmed by SEM and XRD data. The nature of the anamorphosis processes of degradation showed that for modified nanotubes a slower rate of degradation is observed. This indicates a promising possibility of using pulsed low-energy electron beams for directional modification of the crystal structure of copper nanotubes.

Original languageEnglish
Article number075010
JournalMaterials Research Express
Volume5
Issue number7
DOIs
Publication statusPublished - 1 Jul 2018

Fingerprint

Nanostructures
Nanotubes
Degradation
Structural properties
Electron beams
Crystal structure
Caustics
Amorphization
Ionizing radiation
Nanostructured materials
Deterioration
Corrosion resistance
Copper
Corrosion
Oxygen
Oxidation
Defects
Scanning electron microscopy
Kinetics
Electrons

Keywords

  • Corrosion of nanomaterials
  • Degradation processes
  • Nanotechnology
  • Nanotubes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Biomaterials
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Metals and Alloys

Cite this

Effect of electronic modification on nanostructures stability to degradation. / Kozlovskiy; Kenzhina, I.; Kaikanov, ; Stepanov, A.; Shamanin, V.; Zdorovets; Tikhonov.

In: Materials Research Express, Vol. 5, No. 7, 075010, 01.07.2018.

Research output: Contribution to journalArticle

Kozlovskiy ; Kenzhina, I. ; Kaikanov, ; Stepanov, A. ; Shamanin, V. ; Zdorovets ; Tikhonov. / Effect of electronic modification on nanostructures stability to degradation. In: Materials Research Express. 2018 ; Vol. 5, No. 7.
@article{342ccb7d852643338b6ec5b63f649af6,
title = "Effect of electronic modification on nanostructures stability to degradation",
abstract = "One of the ways to improve the corrosion resistance of nanomaterials is the use of ionizing radiation for directional modification of structural properties. The paper presents results of directional modification of nanostructures using flows of low-energy electrons to change the structural properties of Cu nanotubes. Also, we present the dependence of the degradation degree in various aggressive media and time in a medium. The greatest deterioration in crystallographic characteristics of unmodified nanostructures in corrosive media is observed on the day 10th, which is due to partial destruction of the crystal structure as a result of oxidation processes. Also, an increase in the oxygen concentration in the structure leads to an increase in disorder regions, amorphization, and subsequent destruction of samples. Modified nanostructures exhibit a low rate of degradation. It is caused by a change in defects concentration after modification by an electron beam. Such a modification leads to an improvement in structural properties, a decrease in amorphous inclusions, and an increase in materials resistibility to corrosion and degradation. Analysis of the kinetics of structure failure as a result of aggressive media influence on the crystal structure of nanotubes showed that in the case of preliminary modification of nanotubes by an electron beam, nanostructures stability to degradation increases 8.33 times, which is confirmed by SEM and XRD data. The nature of the anamorphosis processes of degradation showed that for modified nanotubes a slower rate of degradation is observed. This indicates a promising possibility of using pulsed low-energy electron beams for directional modification of the crystal structure of copper nanotubes.",
keywords = "Corrosion of nanomaterials, Degradation processes, Nanotechnology, Nanotubes",
author = "Kozlovskiy and I. Kenzhina and Kaikanov and A. Stepanov and V. Shamanin and Zdorovets and Tikhonov",
year = "2018",
month = "7",
day = "1",
doi = "10.1088/2053-1591/aacfa4",
language = "English",
volume = "5",
journal = "Materials Research Express",
issn = "2053-1591",
publisher = "IOP Publishing Ltd.",
number = "7",

}

TY - JOUR

T1 - Effect of electronic modification on nanostructures stability to degradation

AU - Kozlovskiy,

AU - Kenzhina, I.

AU - Kaikanov, null

AU - Stepanov, A.

AU - Shamanin, V.

AU - Zdorovets,

AU - Tikhonov,

PY - 2018/7/1

Y1 - 2018/7/1

N2 - One of the ways to improve the corrosion resistance of nanomaterials is the use of ionizing radiation for directional modification of structural properties. The paper presents results of directional modification of nanostructures using flows of low-energy electrons to change the structural properties of Cu nanotubes. Also, we present the dependence of the degradation degree in various aggressive media and time in a medium. The greatest deterioration in crystallographic characteristics of unmodified nanostructures in corrosive media is observed on the day 10th, which is due to partial destruction of the crystal structure as a result of oxidation processes. Also, an increase in the oxygen concentration in the structure leads to an increase in disorder regions, amorphization, and subsequent destruction of samples. Modified nanostructures exhibit a low rate of degradation. It is caused by a change in defects concentration after modification by an electron beam. Such a modification leads to an improvement in structural properties, a decrease in amorphous inclusions, and an increase in materials resistibility to corrosion and degradation. Analysis of the kinetics of structure failure as a result of aggressive media influence on the crystal structure of nanotubes showed that in the case of preliminary modification of nanotubes by an electron beam, nanostructures stability to degradation increases 8.33 times, which is confirmed by SEM and XRD data. The nature of the anamorphosis processes of degradation showed that for modified nanotubes a slower rate of degradation is observed. This indicates a promising possibility of using pulsed low-energy electron beams for directional modification of the crystal structure of copper nanotubes.

AB - One of the ways to improve the corrosion resistance of nanomaterials is the use of ionizing radiation for directional modification of structural properties. The paper presents results of directional modification of nanostructures using flows of low-energy electrons to change the structural properties of Cu nanotubes. Also, we present the dependence of the degradation degree in various aggressive media and time in a medium. The greatest deterioration in crystallographic characteristics of unmodified nanostructures in corrosive media is observed on the day 10th, which is due to partial destruction of the crystal structure as a result of oxidation processes. Also, an increase in the oxygen concentration in the structure leads to an increase in disorder regions, amorphization, and subsequent destruction of samples. Modified nanostructures exhibit a low rate of degradation. It is caused by a change in defects concentration after modification by an electron beam. Such a modification leads to an improvement in structural properties, a decrease in amorphous inclusions, and an increase in materials resistibility to corrosion and degradation. Analysis of the kinetics of structure failure as a result of aggressive media influence on the crystal structure of nanotubes showed that in the case of preliminary modification of nanotubes by an electron beam, nanostructures stability to degradation increases 8.33 times, which is confirmed by SEM and XRD data. The nature of the anamorphosis processes of degradation showed that for modified nanotubes a slower rate of degradation is observed. This indicates a promising possibility of using pulsed low-energy electron beams for directional modification of the crystal structure of copper nanotubes.

KW - Corrosion of nanomaterials

KW - Degradation processes

KW - Nanotechnology

KW - Nanotubes

UR - http://www.scopus.com/inward/record.url?scp=85050571461&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050571461&partnerID=8YFLogxK

U2 - 10.1088/2053-1591/aacfa4

DO - 10.1088/2053-1591/aacfa4

M3 - Article

VL - 5

JO - Materials Research Express

JF - Materials Research Express

SN - 2053-1591

IS - 7

M1 - 075010

ER -