Abstract
The output signal of the device described is proportional to the relative difference between the rms values of two single-frequency voltages of from 0.003 to 3 V in the frequency range of 100 Hz to 2 MHz with a resolution of not lower than 0.001%. The device operates by comparison with a standard measure; therefore, it can be used in flaw detection, mensuration, and metrology as well as in physics experiments in which the standard and measured quantities can be represented by ac voltages.
| Original language | English |
|---|---|
| Title of host publication | Instruments and Experimental Techniques |
| Pages | 851-853 |
| Number of pages | 3 |
| Volume | 32 |
| Edition | 4 PT 1 |
| Publication status | Published - Jan 1990 |
Fingerprint
ASJC Scopus subject areas
- Engineering (miscellaneous)
Cite this
Device for comparison of rms values of two ac voltages. / Tsimbalist, E. I.; Merzha, A. N.; Ivanov, I. Yu.
Instruments and Experimental Techniques. Vol. 32 4 PT 1. ed. 1990. p. 851-853.Research output: Chapter in Book/Report/Conference proceeding › Chapter
}
TY - CHAP
T1 - Device for comparison of rms values of two ac voltages
AU - Tsimbalist, E. I.
AU - Merzha, A. N.
AU - Ivanov, I. Yu
PY - 1990/1
Y1 - 1990/1
N2 - The output signal of the device described is proportional to the relative difference between the rms values of two single-frequency voltages of from 0.003 to 3 V in the frequency range of 100 Hz to 2 MHz with a resolution of not lower than 0.001%. The device operates by comparison with a standard measure; therefore, it can be used in flaw detection, mensuration, and metrology as well as in physics experiments in which the standard and measured quantities can be represented by ac voltages.
AB - The output signal of the device described is proportional to the relative difference between the rms values of two single-frequency voltages of from 0.003 to 3 V in the frequency range of 100 Hz to 2 MHz with a resolution of not lower than 0.001%. The device operates by comparison with a standard measure; therefore, it can be used in flaw detection, mensuration, and metrology as well as in physics experiments in which the standard and measured quantities can be represented by ac voltages.
UR - http://www.scopus.com/inward/record.url?scp=0025233205&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0025233205&partnerID=8YFLogxK
M3 - Chapter
AN - SCOPUS:0025233205
VL - 32
SP - 851
EP - 853
BT - Instruments and Experimental Techniques
ER -