Development of personalized approach to the reconstruction of bone tissue defects using porous ceramic osteoimplants

D. E. Kulbakin, E. L. Choinzonov, M. R. Mukhamedov, A. S. Buyakov, S. P. Buyakova, S. N. Kulkov

Research output: Contribution to journalConference article

Abstract

A fundamentally new complex technique for preoperative planning and creation of individual implants from ceramics for the reconstruction of the maxillofacial region is clinically applicable and in demand in modern trends of reconstructive surgery were developed and approved. The developed method implies using of alumina based ceramic material, which meets the requirements for medical materials used in reconstructive surgery. It was shown that by varying the initial composition of the ceramic powder material, it is possible to achieve structural and mechanical affinity with the surrounding bone tissue. Building a 3D model of an osteoimplant on the basis of a computed tomography of the patient avoids the need for additional resection of the bone tissue and ensures complete geometric conformity of the osteoimplant to the prosthetic area. The method was approved by the reconstruction of the patient's skull-orbital complex using a three-dimensional personalized ceramic implant. The complete absence of the inflammatory reaction after surgery was observed.

Original languageEnglish
Article number12006
JournalIOP Conference Series: Materials Science and Engineering
Volume511
Issue number1
DOIs
Publication statusPublished - 24 Apr 2019
EventInternational Scientific and Technical Youth Conference on Perspective Materials of Constructional and Medical Purpose 2018, PMCP 2018 - Tomsk, Russian Federation
Duration: 26 Nov 201830 Nov 2018

Fingerprint

Surgery
Bone
Tissue
Defects
Aluminum Oxide
Ceramic materials
Prosthetics
Powders
Tomography
Alumina
Planning
Chemical analysis

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Development of personalized approach to the reconstruction of bone tissue defects using porous ceramic osteoimplants. / Kulbakin, D. E.; Choinzonov, E. L.; Mukhamedov, M. R.; Buyakov, A. S.; Buyakova, S. P.; Kulkov, S. N.

In: IOP Conference Series: Materials Science and Engineering, Vol. 511, No. 1, 12006, 24.04.2019.

Research output: Contribution to journalConference article

@article{81a4b3b5ab574eeda33c4b7cb3faccc1,
title = "Development of personalized approach to the reconstruction of bone tissue defects using porous ceramic osteoimplants",
abstract = "A fundamentally new complex technique for preoperative planning and creation of individual implants from ceramics for the reconstruction of the maxillofacial region is clinically applicable and in demand in modern trends of reconstructive surgery were developed and approved. The developed method implies using of alumina based ceramic material, which meets the requirements for medical materials used in reconstructive surgery. It was shown that by varying the initial composition of the ceramic powder material, it is possible to achieve structural and mechanical affinity with the surrounding bone tissue. Building a 3D model of an osteoimplant on the basis of a computed tomography of the patient avoids the need for additional resection of the bone tissue and ensures complete geometric conformity of the osteoimplant to the prosthetic area. The method was approved by the reconstruction of the patient's skull-orbital complex using a three-dimensional personalized ceramic implant. The complete absence of the inflammatory reaction after surgery was observed.",
author = "Kulbakin, {D. E.} and Choinzonov, {E. L.} and Mukhamedov, {M. R.} and Buyakov, {A. S.} and Buyakova, {S. P.} and Kulkov, {S. N.}",
year = "2019",
month = "4",
day = "24",
doi = "10.1088/1757-899X/511/1/012006",
language = "English",
volume = "511",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Development of personalized approach to the reconstruction of bone tissue defects using porous ceramic osteoimplants

AU - Kulbakin, D. E.

AU - Choinzonov, E. L.

AU - Mukhamedov, M. R.

AU - Buyakov, A. S.

AU - Buyakova, S. P.

AU - Kulkov, S. N.

PY - 2019/4/24

Y1 - 2019/4/24

N2 - A fundamentally new complex technique for preoperative planning and creation of individual implants from ceramics for the reconstruction of the maxillofacial region is clinically applicable and in demand in modern trends of reconstructive surgery were developed and approved. The developed method implies using of alumina based ceramic material, which meets the requirements for medical materials used in reconstructive surgery. It was shown that by varying the initial composition of the ceramic powder material, it is possible to achieve structural and mechanical affinity with the surrounding bone tissue. Building a 3D model of an osteoimplant on the basis of a computed tomography of the patient avoids the need for additional resection of the bone tissue and ensures complete geometric conformity of the osteoimplant to the prosthetic area. The method was approved by the reconstruction of the patient's skull-orbital complex using a three-dimensional personalized ceramic implant. The complete absence of the inflammatory reaction after surgery was observed.

AB - A fundamentally new complex technique for preoperative planning and creation of individual implants from ceramics for the reconstruction of the maxillofacial region is clinically applicable and in demand in modern trends of reconstructive surgery were developed and approved. The developed method implies using of alumina based ceramic material, which meets the requirements for medical materials used in reconstructive surgery. It was shown that by varying the initial composition of the ceramic powder material, it is possible to achieve structural and mechanical affinity with the surrounding bone tissue. Building a 3D model of an osteoimplant on the basis of a computed tomography of the patient avoids the need for additional resection of the bone tissue and ensures complete geometric conformity of the osteoimplant to the prosthetic area. The method was approved by the reconstruction of the patient's skull-orbital complex using a three-dimensional personalized ceramic implant. The complete absence of the inflammatory reaction after surgery was observed.

UR - http://www.scopus.com/inward/record.url?scp=85065710876&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065710876&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/511/1/012006

DO - 10.1088/1757-899X/511/1/012006

M3 - Conference article

AN - SCOPUS:85065710876

VL - 511

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 12006

ER -