Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism

Alena Sergeeva, Natalia Feoktistova, Vladimir Prokopovic, Dmitry Gorin, Dmitry Volodkin

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Fabrication of porous alginate hydrogels with a well-controlled architecture useful for tissue engineering is still a challenge. Here, CaCO3-based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5-50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO3 templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre-encapsulated into CaCO3 vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.

Original languageEnglish
Article number1500386
JournalAdvanced Materials Interfaces
Volume2
Issue number18
DOIs
Publication statusPublished - 14 Dec 2015
Externally publishedYes

Fingerprint

Alginate
Hydrogels
Gels
Dissolution
Osmosis
Dextran
Tissue engineering
Scaffolds
Crosslinking
Pore size
Calcium
Porosity
Elastic moduli
Fabrication
Ions

Keywords

  • calcium carbonate vaterite
  • crosslinking
  • encapsulation
  • osmotic pressure
  • porous alginate gels

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates : Pore Formation Mechanism. / Sergeeva, Alena; Feoktistova, Natalia; Prokopovic, Vladimir; Gorin, Dmitry; Volodkin, Dmitry.

In: Advanced Materials Interfaces, Vol. 2, No. 18, 1500386, 14.12.2015.

Research output: Contribution to journalArticle

Sergeeva, Alena ; Feoktistova, Natalia ; Prokopovic, Vladimir ; Gorin, Dmitry ; Volodkin, Dmitry. / Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates : Pore Formation Mechanism. In: Advanced Materials Interfaces. 2015 ; Vol. 2, No. 18.
@article{b1a3967ba82e47ea9ede17536eea3f8f,
title = "Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism",
abstract = "Fabrication of porous alginate hydrogels with a well-controlled architecture useful for tissue engineering is still a challenge. Here, CaCO3-based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5-50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO3 templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre-encapsulated into CaCO3 vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2{\%}). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.",
keywords = "calcium carbonate vaterite, crosslinking, encapsulation, osmotic pressure, porous alginate gels",
author = "Alena Sergeeva and Natalia Feoktistova and Vladimir Prokopovic and Dmitry Gorin and Dmitry Volodkin",
year = "2015",
month = "12",
day = "14",
doi = "10.1002/admi.201500386",
language = "English",
volume = "2",
journal = "Advanced Materials Interfaces",
issn = "2196-7350",
publisher = "John Wiley and Sons Ltd",
number = "18",

}

TY - JOUR

T1 - Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates

T2 - Pore Formation Mechanism

AU - Sergeeva, Alena

AU - Feoktistova, Natalia

AU - Prokopovic, Vladimir

AU - Gorin, Dmitry

AU - Volodkin, Dmitry

PY - 2015/12/14

Y1 - 2015/12/14

N2 - Fabrication of porous alginate hydrogels with a well-controlled architecture useful for tissue engineering is still a challenge. Here, CaCO3-based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5-50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO3 templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre-encapsulated into CaCO3 vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.

AB - Fabrication of porous alginate hydrogels with a well-controlled architecture useful for tissue engineering is still a challenge. Here, CaCO3-based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5-50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO3 templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre-encapsulated into CaCO3 vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.

KW - calcium carbonate vaterite

KW - crosslinking

KW - encapsulation

KW - osmotic pressure

KW - porous alginate gels

UR - http://www.scopus.com/inward/record.url?scp=84955186487&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84955186487&partnerID=8YFLogxK

U2 - 10.1002/admi.201500386

DO - 10.1002/admi.201500386

M3 - Article

AN - SCOPUS:84955186487

VL - 2

JO - Advanced Materials Interfaces

JF - Advanced Materials Interfaces

SN - 2196-7350

IS - 18

M1 - 1500386

ER -