Abstract
The modification of power supply circuit used for pumping metal vapor laser is analyzed. The results of OrCAD simulation of the processes that occur in the power supply operating at different operation modes are presented. The effect of the capacitance ratio on the storage capacitor charging process is described. The mode which provides more time for the recovery of the thyratron is discussed.
| Original language | English |
|---|---|
| Title of host publication | Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| ISBN (Print) | 9781479962211 |
| DOIs | |
| Publication status | Published - 15 Dec 2014 |
| Event | 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 - Tomsk, Russian Federation Duration: 16 Oct 2014 → 18 Oct 2014 |
Other
| Other | 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 |
|---|---|
| Country | Russian Federation |
| City | Tomsk |
| Period | 16.10.14 → 18.10.14 |
Fingerprint
Keywords
- capacitor charge
- gas discharge tube
- inverter
- OrCAD simulation
- power supply
ASJC Scopus subject areas
- Mechanical Engineering
- Electrical and Electronic Engineering
- Control and Systems Engineering
Cite this
Design and simulation of a metal vapor laser power supply. / Trigub, Maxim Victorovich; Ogorodnikov, D. N.; Vlasov, V. V.; Evtushenko, T. G.
Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 2014. 6986889.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Design and simulation of a metal vapor laser power supply
AU - Trigub, Maxim Victorovich
AU - Ogorodnikov, D. N.
AU - Vlasov, V. V.
AU - Evtushenko, T. G.
PY - 2014/12/15
Y1 - 2014/12/15
N2 - The modification of power supply circuit used for pumping metal vapor laser is analyzed. The results of OrCAD simulation of the processes that occur in the power supply operating at different operation modes are presented. The effect of the capacitance ratio on the storage capacitor charging process is described. The mode which provides more time for the recovery of the thyratron is discussed.
AB - The modification of power supply circuit used for pumping metal vapor laser is analyzed. The results of OrCAD simulation of the processes that occur in the power supply operating at different operation modes are presented. The effect of the capacitance ratio on the storage capacitor charging process is described. The mode which provides more time for the recovery of the thyratron is discussed.
KW - capacitor charge
KW - gas discharge tube
KW - inverter
KW - OrCAD simulation
KW - power supply
UR - http://www.scopus.com/inward/record.url?scp=84922513737&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84922513737&partnerID=8YFLogxK
U2 - 10.1109/MEACS.2014.6986889
DO - 10.1109/MEACS.2014.6986889
M3 - Conference contribution
AN - SCOPUS:84922513737
SN - 9781479962211
BT - Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
PB - Institute of Electrical and Electronics Engineers Inc.
ER -