Controlling the type and the form of chip when machining steel

S. V. Gruby, A. A. Lasukov, R. Yu Nekrasov, E. V. Politsinsky, D. A. Arkhipova

Research output: Contribution to journalConference article

2 Citations (Scopus)

Abstract

The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.

Original languageEnglish
Article number012065
JournalIOP Conference Series: Materials Science and Engineering
Volume142
Issue number1
DOIs
Publication statusPublished - 2 Sep 2016
Event7th International Scientific Practical Conference on Innovative Technologies in Engineering - Yurga, Russian Federation
Duration: 19 May 201621 May 2016

Fingerprint

Steel
Machining
Metal cutting
Cutting tools

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Controlling the type and the form of chip when machining steel. / Gruby, S. V.; Lasukov, A. A.; Nekrasov, R. Yu; Politsinsky, E. V.; Arkhipova, D. A.

In: IOP Conference Series: Materials Science and Engineering, Vol. 142, No. 1, 012065, 02.09.2016.

Research output: Contribution to journalConference article

Gruby, S. V. ; Lasukov, A. A. ; Nekrasov, R. Yu ; Politsinsky, E. V. ; Arkhipova, D. A. / Controlling the type and the form of chip when machining steel. In: IOP Conference Series: Materials Science and Engineering. 2016 ; Vol. 142, No. 1.
@article{ce489021b0e94860aee9e2976450e011,
title = "Controlling the type and the form of chip when machining steel",
abstract = "The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.",
author = "Gruby, {S. V.} and Lasukov, {A. A.} and Nekrasov, {R. Yu} and Politsinsky, {E. V.} and Arkhipova, {D. A.}",
year = "2016",
month = "9",
day = "2",
doi = "10.1088/1757-899X/142/1/012065",
language = "English",
volume = "142",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Controlling the type and the form of chip when machining steel

AU - Gruby, S. V.

AU - Lasukov, A. A.

AU - Nekrasov, R. Yu

AU - Politsinsky, E. V.

AU - Arkhipova, D. A.

PY - 2016/9/2

Y1 - 2016/9/2

N2 - The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.

AB - The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.

UR - http://www.scopus.com/inward/record.url?scp=84988521322&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84988521322&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/142/1/012065

DO - 10.1088/1757-899X/142/1/012065

M3 - Conference article

VL - 142

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012065

ER -