Control system for device «thermotest

Aleksey Ivanovich Soldatov, A. A. Soldatov, P. V. Sorokin, E. L. Loginov, A. A. Abouellail, Olesya Anatolievna Kozhemyak, S. I. Bortalevich

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

The article describes the original algorithm for control the process of measuring thermo electromotive force. Proposed algorithm allows minimizing the effect of destabilizing factors at the manual testing of metals and alloys. It was proposed to take measurements at a time point when the supply voltage is zero, as well during the pause of PWM voltage of heating and at zero value of contact resistance between the electrodes and testing sample. The control algorithm provides sampling only valid data based on the above criteria, as well, data averaging and indication.

Original languageEnglish
Title of host publication2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781467383837
DOIs
Publication statusPublished - 14 Jun 2016
Event2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Moscow, Russian Federation
Duration: 12 May 201614 May 2016

Other

Other2016 International Siberian Conference on Control and Communications, SIBCON 2016
CountryRussian Federation
CityMoscow
Period12.5.1614.5.16

Fingerprint

Voltage
Control System
Contact Resistance
Control systems
Testing
Zero
Control Algorithm
Electrode
Averaging
Heating
Electromotive force
Metals
Electric potential
Valid
Contact resistance
Pulse width modulation
Sampling
Electrodes

Keywords

  • algorithm
  • cold electrode
  • hot electrode
  • testing sample
  • thermo electromotive force

ASJC Scopus subject areas

  • Signal Processing
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Modelling and Simulation
  • Computer Networks and Communications

Cite this

Soldatov, A. I., Soldatov, A. A., Sorokin, P. V., Loginov, E. L., Abouellail, A. A., Kozhemyak, OA., & Bortalevich, S. I. (2016). Control system for device «thermotest. In 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings [7491869] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SIBCON.2016.7491869

Control system for device «thermotest. / Soldatov, Aleksey Ivanovich; Soldatov, A. A.; Sorokin, P. V.; Loginov, E. L.; Abouellail, A. A.; Kozhemyak, Olesya Anatolievna; Bortalevich, S. I.

2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. 7491869.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldatov, AI, Soldatov, AA, Sorokin, PV, Loginov, EL, Abouellail, AA, Kozhemyak, OA & Bortalevich, SI 2016, Control system for device «thermotest. in 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings., 7491869, Institute of Electrical and Electronics Engineers Inc., 2016 International Siberian Conference on Control and Communications, SIBCON 2016, Moscow, Russian Federation, 12.5.16. https://doi.org/10.1109/SIBCON.2016.7491869
Soldatov AI, Soldatov AA, Sorokin PV, Loginov EL, Abouellail AA, Kozhemyak OA et al. Control system for device «thermotest. In 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2016. 7491869 https://doi.org/10.1109/SIBCON.2016.7491869
Soldatov, Aleksey Ivanovich ; Soldatov, A. A. ; Sorokin, P. V. ; Loginov, E. L. ; Abouellail, A. A. ; Kozhemyak, Olesya Anatolievna ; Bortalevich, S. I. / Control system for device «thermotest. 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016.
@inproceedings{be136d845f2c44018101d99342eab518,
title = "Control system for device «thermotest",
abstract = "The article describes the original algorithm for control the process of measuring thermo electromotive force. Proposed algorithm allows minimizing the effect of destabilizing factors at the manual testing of metals and alloys. It was proposed to take measurements at a time point when the supply voltage is zero, as well during the pause of PWM voltage of heating and at zero value of contact resistance between the electrodes and testing sample. The control algorithm provides sampling only valid data based on the above criteria, as well, data averaging and indication.",
keywords = "algorithm, cold electrode, hot electrode, testing sample, thermo electromotive force",
author = "Soldatov, {Aleksey Ivanovich} and Soldatov, {A. A.} and Sorokin, {P. V.} and Loginov, {E. L.} and Abouellail, {A. A.} and Olesya Anatolievna Kozhemyak and Bortalevich, {S. I.}",
year = "2016",
month = "6",
day = "14",
doi = "10.1109/SIBCON.2016.7491869",
language = "English",
booktitle = "2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Control system for device «thermotest

AU - Soldatov, Aleksey Ivanovich

AU - Soldatov, A. A.

AU - Sorokin, P. V.

AU - Loginov, E. L.

AU - Abouellail, A. A.

AU - Kozhemyak, Olesya Anatolievna

AU - Bortalevich, S. I.

PY - 2016/6/14

Y1 - 2016/6/14

N2 - The article describes the original algorithm for control the process of measuring thermo electromotive force. Proposed algorithm allows minimizing the effect of destabilizing factors at the manual testing of metals and alloys. It was proposed to take measurements at a time point when the supply voltage is zero, as well during the pause of PWM voltage of heating and at zero value of contact resistance between the electrodes and testing sample. The control algorithm provides sampling only valid data based on the above criteria, as well, data averaging and indication.

AB - The article describes the original algorithm for control the process of measuring thermo electromotive force. Proposed algorithm allows minimizing the effect of destabilizing factors at the manual testing of metals and alloys. It was proposed to take measurements at a time point when the supply voltage is zero, as well during the pause of PWM voltage of heating and at zero value of contact resistance between the electrodes and testing sample. The control algorithm provides sampling only valid data based on the above criteria, as well, data averaging and indication.

KW - algorithm

KW - cold electrode

KW - hot electrode

KW - testing sample

KW - thermo electromotive force

UR - http://www.scopus.com/inward/record.url?scp=84978141310&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84978141310&partnerID=8YFLogxK

U2 - 10.1109/SIBCON.2016.7491869

DO - 10.1109/SIBCON.2016.7491869

M3 - Conference contribution

BT - 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -