Abstract
Experience in the operation and maintenance of 300D90 pumps under Soviet Central Asian conditions showed that in the case of major overhaul the inner surfaces of the housing components of the pumps have to be restored by surfacing and the rotors and slot seals have to be replaced by those reconditioned in the repair works. These components are generally inferior in quality to the new ones. The parameters of the overhauled pumps are also found to be lower. In order to formulate general technical specifications for overhaul, admissible deviations of pressure heads and efficiency were determined.
| Original language | English |
|---|---|
| Pages (from-to) | 338-339 |
| Number of pages | 2 |
| Journal | Chemical and Petroleum Engineering |
| Volume | 19 |
| Issue number | 8 |
| DOIs | |
| Publication status | Published - Aug 1983 |
Fingerprint
ASJC Scopus subject areas
- Fuel Technology
- Chemical Engineering(all)
Cite this
Control of defect parameters of 300D90 pumps after overhaul. / Kuznetsov, G. V.; Magurdumov, R. A.; Malevskii, N. F.; Kim, R.
In: Chemical and Petroleum Engineering, Vol. 19, No. 8, 08.1983, p. 338-339.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Control of defect parameters of 300D90 pumps after overhaul
AU - Kuznetsov, G. V.
AU - Magurdumov, R. A.
AU - Malevskii, N. F.
AU - Kim, R.
PY - 1983/8
Y1 - 1983/8
N2 - Experience in the operation and maintenance of 300D90 pumps under Soviet Central Asian conditions showed that in the case of major overhaul the inner surfaces of the housing components of the pumps have to be restored by surfacing and the rotors and slot seals have to be replaced by those reconditioned in the repair works. These components are generally inferior in quality to the new ones. The parameters of the overhauled pumps are also found to be lower. In order to formulate general technical specifications for overhaul, admissible deviations of pressure heads and efficiency were determined.
AB - Experience in the operation and maintenance of 300D90 pumps under Soviet Central Asian conditions showed that in the case of major overhaul the inner surfaces of the housing components of the pumps have to be restored by surfacing and the rotors and slot seals have to be replaced by those reconditioned in the repair works. These components are generally inferior in quality to the new ones. The parameters of the overhauled pumps are also found to be lower. In order to formulate general technical specifications for overhaul, admissible deviations of pressure heads and efficiency were determined.
UR - http://www.scopus.com/inward/record.url?scp=34250138224&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=34250138224&partnerID=8YFLogxK
U2 - 10.1007/BF01179246
DO - 10.1007/BF01179246
M3 - Article
AN - SCOPUS:34250138224
VL - 19
SP - 338
EP - 339
JO - Chemical and Petroleum Engineering (English translation of Khimicheskoe i Neftyanoe Mashinostroenie)
JF - Chemical and Petroleum Engineering (English translation of Khimicheskoe i Neftyanoe Mashinostroenie)
SN - 0009-2355
IS - 8
ER -