Abstract
The paper deals with two scale approach to design of filled polymeric composites being based on computational mechanics and physical mesomechanics concepts. 1. Computer aided design-direct and inverse problems of deformation-strength design. Within this part of actuality are two following problems of deformation-strength properties of materials under design: i) Determination of effective material characteristics by values of control parameters-properties of phases to compose them, internal geometry of the material, pattern of interphase interaction (direct problems); ii) Finding out values of the control parameters to provide formation of materials with specified deformation-strength properties. Problems of two-scale analysis of filled polymeric composite coatings for tribotechnical application. First level is responsible for analysis of a representative mesovolume, where presence of different phases is considered in explicit form. At the second level the material is considered as a homogeneous medium. The obtained results are compared with experimental data with discussion of further prospects as well as for solving practical problems.
| Original language | English |
|---|---|
| Title of host publication | Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 |
| Pages | 831-838 |
| Number of pages | 8 |
| Publication status | Published - 2011 |
| Event | 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 - Shanghai, China Duration: 22 May 2011 → 26 May 2011 |
Other
| Other | 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 |
|---|---|
| Country | China |
| City | Shanghai |
| Period | 22.5.11 → 26.5.11 |
Fingerprint
Keywords
- Computer-aided design
- Filled composite
ASJC Scopus subject areas
- Mechanics of Materials
Cite this
Computer-aided design of filled polymeric composites for tribotechnical applications. / Lyukshin, B. A.; Lyukshin, P. A.; Panin, S. V.; Bochkareva, S. A.; Matolygina, N. Yu; Grishaeva, N. Yu; Strukov, Yu S.
Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011. 2011. p. 831-838.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Computer-aided design of filled polymeric composites for tribotechnical applications
AU - Lyukshin, B. A.
AU - Lyukshin, P. A.
AU - Panin, S. V.
AU - Bochkareva, S. A.
AU - Matolygina, N. Yu
AU - Grishaeva, N. Yu
AU - Strukov, Yu S.
PY - 2011
Y1 - 2011
N2 - The paper deals with two scale approach to design of filled polymeric composites being based on computational mechanics and physical mesomechanics concepts. 1. Computer aided design-direct and inverse problems of deformation-strength design. Within this part of actuality are two following problems of deformation-strength properties of materials under design: i) Determination of effective material characteristics by values of control parameters-properties of phases to compose them, internal geometry of the material, pattern of interphase interaction (direct problems); ii) Finding out values of the control parameters to provide formation of materials with specified deformation-strength properties. Problems of two-scale analysis of filled polymeric composite coatings for tribotechnical application. First level is responsible for analysis of a representative mesovolume, where presence of different phases is considered in explicit form. At the second level the material is considered as a homogeneous medium. The obtained results are compared with experimental data with discussion of further prospects as well as for solving practical problems.
AB - The paper deals with two scale approach to design of filled polymeric composites being based on computational mechanics and physical mesomechanics concepts. 1. Computer aided design-direct and inverse problems of deformation-strength design. Within this part of actuality are two following problems of deformation-strength properties of materials under design: i) Determination of effective material characteristics by values of control parameters-properties of phases to compose them, internal geometry of the material, pattern of interphase interaction (direct problems); ii) Finding out values of the control parameters to provide formation of materials with specified deformation-strength properties. Problems of two-scale analysis of filled polymeric composite coatings for tribotechnical application. First level is responsible for analysis of a representative mesovolume, where presence of different phases is considered in explicit form. At the second level the material is considered as a homogeneous medium. The obtained results are compared with experimental data with discussion of further prospects as well as for solving practical problems.
KW - Computer-aided design
KW - Filled composite
UR - http://www.scopus.com/inward/record.url?scp=84866873321&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84866873321&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84866873321
SP - 831
EP - 838
BT - Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011
ER -