Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow

S. A. Yankovsky, I. V. Cherednik, E. D. Kupoderova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The analysis of the possibility of sawmill waste utilization during continuous combustion in a mixture with coal is presented. The conditions and characteristics of the particles ignition of fuel mixtures based on coal dust and sawmill waste at various mass concentrations of the fuel components have been experimentally determined. The experiments were carried out in an environment heated to high (from 600 ° C to 1000 ° C) air temperatures. Registration of heating processes of studied pulverized mixed fuels which were rather promising for thermal power engineering, their subsequent ignition and combustion was carried out using a high-speed video camera (image format-1024 × 1024 pixels, frame rate-up to 105 per second), ensuring high discretization of the recording results for characteristic process times. It has been established that the increase in the proportion of wood components in the fuel granule significantly reduces the values of the ignition delay times of all the studied mixtures based on D grade coal. The limit of stable ignition of such fuels is revealed.

Original languageEnglish
Title of host publicationInternational Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019
EditorsGeniy Kuznetsov, Evgeniya Orlova, Dmitry Feoktistov
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735418783
DOIs
Publication statusPublished - 9 Aug 2019
EventInternational Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019 - Tomsk, Russian Federation
Duration: 23 Apr 201925 Apr 2019

Publication series

NameAIP Conference Proceedings
Volume2135
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

ConferenceInternational Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019
CountryRussian Federation
CityTomsk
Period23.4.1925.4.19

Fingerprint

bituminous coal
biomass
combustion
coal
ignition
beds
sawmills
waste utilization
heat
turbogenerators
video cameras
thermal power
dust
format
granules
grade
proportion
air temperature
pixel
engineering

ASJC Scopus subject areas

  • Ecology, Evolution, Behavior and Systematics
  • Ecology
  • Plant Science
  • Physics and Astronomy(all)
  • Nature and Landscape Conservation

Cite this

Yankovsky, S. A., Cherednik, I. V., & Kupoderova, E. D. (2019). Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow. In G. Kuznetsov, E. Orlova, & D. Feoktistov (Eds.), International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019 [020061] (AIP Conference Proceedings; Vol. 2135). American Institute of Physics Inc.. https://doi.org/10.1063/1.5120698

Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow. / Yankovsky, S. A.; Cherednik, I. V.; Kupoderova, E. D.

International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. ed. / Geniy Kuznetsov; Evgeniya Orlova; Dmitry Feoktistov. American Institute of Physics Inc., 2019. 020061 (AIP Conference Proceedings; Vol. 2135).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yankovsky, SA, Cherednik, IV & Kupoderova, ED 2019, Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow. in G Kuznetsov, E Orlova & D Feoktistov (eds), International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019., 020061, AIP Conference Proceedings, vol. 2135, American Institute of Physics Inc., International Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019, Tomsk, Russian Federation, 23.4.19. https://doi.org/10.1063/1.5120698
Yankovsky SA, Cherednik IV, Kupoderova ED. Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow. In Kuznetsov G, Orlova E, Feoktistov D, editors, International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. American Institute of Physics Inc. 2019. 020061. (AIP Conference Proceedings). https://doi.org/10.1063/1.5120698
Yankovsky, S. A. ; Cherednik, I. V. ; Kupoderova, E. D. / Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow. International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. editor / Geniy Kuznetsov ; Evgeniya Orlova ; Dmitry Feoktistov. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).
@inproceedings{f4607900e8bd4965ac9743ac223fa820,
title = "Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow",
abstract = "The analysis of the possibility of sawmill waste utilization during continuous combustion in a mixture with coal is presented. The conditions and characteristics of the particles ignition of fuel mixtures based on coal dust and sawmill waste at various mass concentrations of the fuel components have been experimentally determined. The experiments were carried out in an environment heated to high (from 600 ° C to 1000 ° C) air temperatures. Registration of heating processes of studied pulverized mixed fuels which were rather promising for thermal power engineering, their subsequent ignition and combustion was carried out using a high-speed video camera (image format-1024 × 1024 pixels, frame rate-up to 105 per second), ensuring high discretization of the recording results for characteristic process times. It has been established that the increase in the proportion of wood components in the fuel granule significantly reduces the values of the ignition delay times of all the studied mixtures based on D grade coal. The limit of stable ignition of such fuels is revealed.",
author = "Yankovsky, {S. A.} and Cherednik, {I. V.} and Kupoderova, {E. D.}",
year = "2019",
month = "8",
day = "9",
doi = "10.1063/1.5120698",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Geniy Kuznetsov and Evgeniya Orlova and Dmitry Feoktistov",
booktitle = "International Youth Scientific Conference {"}Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment{"}, HMTTSC 2019",

}

TY - GEN

T1 - Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow

AU - Yankovsky, S. A.

AU - Cherednik, I. V.

AU - Kupoderova, E. D.

PY - 2019/8/9

Y1 - 2019/8/9

N2 - The analysis of the possibility of sawmill waste utilization during continuous combustion in a mixture with coal is presented. The conditions and characteristics of the particles ignition of fuel mixtures based on coal dust and sawmill waste at various mass concentrations of the fuel components have been experimentally determined. The experiments were carried out in an environment heated to high (from 600 ° C to 1000 ° C) air temperatures. Registration of heating processes of studied pulverized mixed fuels which were rather promising for thermal power engineering, their subsequent ignition and combustion was carried out using a high-speed video camera (image format-1024 × 1024 pixels, frame rate-up to 105 per second), ensuring high discretization of the recording results for characteristic process times. It has been established that the increase in the proportion of wood components in the fuel granule significantly reduces the values of the ignition delay times of all the studied mixtures based on D grade coal. The limit of stable ignition of such fuels is revealed.

AB - The analysis of the possibility of sawmill waste utilization during continuous combustion in a mixture with coal is presented. The conditions and characteristics of the particles ignition of fuel mixtures based on coal dust and sawmill waste at various mass concentrations of the fuel components have been experimentally determined. The experiments were carried out in an environment heated to high (from 600 ° C to 1000 ° C) air temperatures. Registration of heating processes of studied pulverized mixed fuels which were rather promising for thermal power engineering, their subsequent ignition and combustion was carried out using a high-speed video camera (image format-1024 × 1024 pixels, frame rate-up to 105 per second), ensuring high discretization of the recording results for characteristic process times. It has been established that the increase in the proportion of wood components in the fuel granule significantly reduces the values of the ignition delay times of all the studied mixtures based on D grade coal. The limit of stable ignition of such fuels is revealed.

UR - http://www.scopus.com/inward/record.url?scp=85071011738&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071011738&partnerID=8YFLogxK

U2 - 10.1063/1.5120698

DO - 10.1063/1.5120698

M3 - Conference contribution

T3 - AIP Conference Proceedings

BT - International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019

A2 - Kuznetsov, Geniy

A2 - Orlova, Evgeniya

A2 - Feoktistov, Dmitry

PB - American Institute of Physics Inc.

ER -