Comparative study of the hydroxyapatite coatings prepared with/without substrate bias

Stanislav Dudin, Cosmin M. Cotrut, Mihaela Dinu, Anna Zykova, Anca C. Parau, Stanislav Yakovin, Alina Vladescu

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

The aim of this paper is to prepare the hydroxyapatite by Ion Beam Assisted Deposition and to investigate in terms of its elemental and phase composition, roughness and in vitro corrosion resistance. The coatings were prepared with and without applying bias on substrate, in order to find the effect of bias on the chemical, structural, morphological and anti-corrosive properties. The biased coatings exhibited Ca/P ratio closer to the value of the stoichiometric HAP (1.67). The phase composition is not affected by the bias evolution. The adhesion of both coatings is still satisfactory for biomedical applications, irrespective of the bias. Hydroxyapatite deposited without bias presented the best corrosion resistance in SBF at 37 °C, probably due to its smooth surface and low porosity. Moreover, this coating proved to have the highest protection ability at the SBF corrosive attack.

Original languageEnglish
Pages (from-to)14968-14975
Number of pages8
JournalCeramics International
Volume43
Issue number17
DOIs
Publication statusPublished - 1 Dec 2017

Fingerprint

Durapatite
Hydroxyapatite
Coatings
Substrates
Phase composition
Corrosion resistance
Corrosive effects
Ion beam assisted deposition
Caustics
Adhesion
Porosity
Surface roughness

Keywords

  • A: Films
  • B: Porosity, X-ray methods
  • C: Corrosion
  • D: Apatite
  • E: Biomedical applications

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Comparative study of the hydroxyapatite coatings prepared with/without substrate bias. / Dudin, Stanislav; Cotrut, Cosmin M.; Dinu, Mihaela; Zykova, Anna; Parau, Anca C.; Yakovin, Stanislav; Vladescu, Alina.

In: Ceramics International, Vol. 43, No. 17, 01.12.2017, p. 14968-14975.

Research output: Contribution to journalArticle

Dudin, Stanislav ; Cotrut, Cosmin M. ; Dinu, Mihaela ; Zykova, Anna ; Parau, Anca C. ; Yakovin, Stanislav ; Vladescu, Alina. / Comparative study of the hydroxyapatite coatings prepared with/without substrate bias. In: Ceramics International. 2017 ; Vol. 43, No. 17. pp. 14968-14975.
@article{fdb24fef4d7e4d86b24684a0907161d9,
title = "Comparative study of the hydroxyapatite coatings prepared with/without substrate bias",
abstract = "The aim of this paper is to prepare the hydroxyapatite by Ion Beam Assisted Deposition and to investigate in terms of its elemental and phase composition, roughness and in vitro corrosion resistance. The coatings were prepared with and without applying bias on substrate, in order to find the effect of bias on the chemical, structural, morphological and anti-corrosive properties. The biased coatings exhibited Ca/P ratio closer to the value of the stoichiometric HAP (1.67). The phase composition is not affected by the bias evolution. The adhesion of both coatings is still satisfactory for biomedical applications, irrespective of the bias. Hydroxyapatite deposited without bias presented the best corrosion resistance in SBF at 37 °C, probably due to its smooth surface and low porosity. Moreover, this coating proved to have the highest protection ability at the SBF corrosive attack.",
keywords = "A: Films, B: Porosity, X-ray methods, C: Corrosion, D: Apatite, E: Biomedical applications",
author = "Stanislav Dudin and Cotrut, {Cosmin M.} and Mihaela Dinu and Anna Zykova and Parau, {Anca C.} and Stanislav Yakovin and Alina Vladescu",
year = "2017",
month = "12",
day = "1",
doi = "10.1016/j.ceramint.2017.08.016",
language = "English",
volume = "43",
pages = "14968--14975",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",
number = "17",

}

TY - JOUR

T1 - Comparative study of the hydroxyapatite coatings prepared with/without substrate bias

AU - Dudin, Stanislav

AU - Cotrut, Cosmin M.

AU - Dinu, Mihaela

AU - Zykova, Anna

AU - Parau, Anca C.

AU - Yakovin, Stanislav

AU - Vladescu, Alina

PY - 2017/12/1

Y1 - 2017/12/1

N2 - The aim of this paper is to prepare the hydroxyapatite by Ion Beam Assisted Deposition and to investigate in terms of its elemental and phase composition, roughness and in vitro corrosion resistance. The coatings were prepared with and without applying bias on substrate, in order to find the effect of bias on the chemical, structural, morphological and anti-corrosive properties. The biased coatings exhibited Ca/P ratio closer to the value of the stoichiometric HAP (1.67). The phase composition is not affected by the bias evolution. The adhesion of both coatings is still satisfactory for biomedical applications, irrespective of the bias. Hydroxyapatite deposited without bias presented the best corrosion resistance in SBF at 37 °C, probably due to its smooth surface and low porosity. Moreover, this coating proved to have the highest protection ability at the SBF corrosive attack.

AB - The aim of this paper is to prepare the hydroxyapatite by Ion Beam Assisted Deposition and to investigate in terms of its elemental and phase composition, roughness and in vitro corrosion resistance. The coatings were prepared with and without applying bias on substrate, in order to find the effect of bias on the chemical, structural, morphological and anti-corrosive properties. The biased coatings exhibited Ca/P ratio closer to the value of the stoichiometric HAP (1.67). The phase composition is not affected by the bias evolution. The adhesion of both coatings is still satisfactory for biomedical applications, irrespective of the bias. Hydroxyapatite deposited without bias presented the best corrosion resistance in SBF at 37 °C, probably due to its smooth surface and low porosity. Moreover, this coating proved to have the highest protection ability at the SBF corrosive attack.

KW - A: Films

KW - B: Porosity, X-ray methods

KW - C: Corrosion

KW - D: Apatite

KW - E: Biomedical applications

UR - http://www.scopus.com/inward/record.url?scp=85026735564&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85026735564&partnerID=8YFLogxK

U2 - 10.1016/j.ceramint.2017.08.016

DO - 10.1016/j.ceramint.2017.08.016

M3 - Article

VL - 43

SP - 14968

EP - 14975

JO - Ceramics International

JF - Ceramics International

SN - 0272-8842

IS - 17

ER -