Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In the work the physical, mechanical and chemical properties of oxide and calcium-phosphate coatings formed by the microarc oxidation and radio-frequency magnetron sputtering methods, or their combination were studied. It is shown that combining the advantages of various technologies enables one to obtain a wide range of hybrid coatings used for various strategies of osteosynthesis. The calcium phosphate coatings obtained by the radio-frequency magnetron sputtering methods were chosen as coatings on cortical screws. The hybrid coatings obtained by a combination of microarc oxidation method and radio-frequency magnetron sputtering method were recommended for intramedullary implants. For extramedullary implants, the most optimal coatings are the coatings formed by radio-frequency magnetron sputtering with an intermediate TiO2 sublayer.

Original languageEnglish
Title of host publicationPhysics of Cancer
Subtitle of host publicationInterdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017
EditorsElazar Y. Gutmanas, Oleg B. Naimark, Yurii P. Sharkeev
PublisherAmerican Institute of Physics Inc.
Volume1882
ISBN (Electronic)9780735415621
DOIs
Publication statusPublished - 28 Sep 2017
EventInternational Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017 - Tomsk, Russian Federation
Duration: 23 May 201726 May 2017

Conference

ConferenceInternational Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017
CountryRussian Federation
CityTomsk
Period23.5.1726.5.17

Fingerprint

chemical properties
physical properties
mechanical properties
coatings
radio frequencies
magnetron sputtering
calcium phosphates
oxidation
screws
oxides

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Kharapudchenko, E., Ignatov, V., Kozelskaya, A., & Tverdokhlebov, S. (2017). Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants. In E. Y. Gutmanas, O. B. Naimark, & Y. P. Sharkeev (Eds.), Physics of Cancer: Interdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017 (Vol. 1882). [020032] American Institute of Physics Inc.. https://doi.org/10.1063/1.5001611

Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants. / Kharapudchenko, E.; Ignatov, V.; Kozelskaya, A.; Tverdokhlebov, S.

Physics of Cancer: Interdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017. ed. / Elazar Y. Gutmanas; Oleg B. Naimark; Yurii P. Sharkeev. Vol. 1882 American Institute of Physics Inc., 2017. 020032.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kharapudchenko, E, Ignatov, V, Kozelskaya, A & Tverdokhlebov, S 2017, Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants. in EY Gutmanas, OB Naimark & YP Sharkeev (eds), Physics of Cancer: Interdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017. vol. 1882, 020032, American Institute of Physics Inc., International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017, Tomsk, Russian Federation, 23.5.17. https://doi.org/10.1063/1.5001611
Kharapudchenko E, Ignatov V, Kozelskaya A, Tverdokhlebov S. Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants. In Gutmanas EY, Naimark OB, Sharkeev YP, editors, Physics of Cancer: Interdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017. Vol. 1882. American Institute of Physics Inc. 2017. 020032 https://doi.org/10.1063/1.5001611
Kharapudchenko, E. ; Ignatov, V. ; Kozelskaya, A. ; Tverdokhlebov, S. / Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants. Physics of Cancer: Interdisciplinary Problems and Clinical Applications - Proceedings of the International Conference on Physics of Cancer: Interdisciplinary Problems and Clinical Applications, PC IPCA 2017. editor / Elazar Y. Gutmanas ; Oleg B. Naimark ; Yurii P. Sharkeev. Vol. 1882 American Institute of Physics Inc., 2017.
@inproceedings{d93e7a5b559f423cb42f870c7038d25c,
title = "Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants",
abstract = "In the work the physical, mechanical and chemical properties of oxide and calcium-phosphate coatings formed by the microarc oxidation and radio-frequency magnetron sputtering methods, or their combination were studied. It is shown that combining the advantages of various technologies enables one to obtain a wide range of hybrid coatings used for various strategies of osteosynthesis. The calcium phosphate coatings obtained by the radio-frequency magnetron sputtering methods were chosen as coatings on cortical screws. The hybrid coatings obtained by a combination of microarc oxidation method and radio-frequency magnetron sputtering method were recommended for intramedullary implants. For extramedullary implants, the most optimal coatings are the coatings formed by radio-frequency magnetron sputtering with an intermediate TiO2 sublayer.",
author = "E. Kharapudchenko and V. Ignatov and A. Kozelskaya and S. Tverdokhlebov",
year = "2017",
month = "9",
day = "28",
doi = "10.1063/1.5001611",
language = "English",
volume = "1882",
editor = "Gutmanas, {Elazar Y.} and Naimark, {Oleg B.} and Sharkeev, {Yurii P.}",
booktitle = "Physics of Cancer",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Comparative studies of the physical, mechanical and chemical properties of hybrid coatings for medical implants

AU - Kharapudchenko, E.

AU - Ignatov, V.

AU - Kozelskaya, A.

AU - Tverdokhlebov, S.

PY - 2017/9/28

Y1 - 2017/9/28

N2 - In the work the physical, mechanical and chemical properties of oxide and calcium-phosphate coatings formed by the microarc oxidation and radio-frequency magnetron sputtering methods, or their combination were studied. It is shown that combining the advantages of various technologies enables one to obtain a wide range of hybrid coatings used for various strategies of osteosynthesis. The calcium phosphate coatings obtained by the radio-frequency magnetron sputtering methods were chosen as coatings on cortical screws. The hybrid coatings obtained by a combination of microarc oxidation method and radio-frequency magnetron sputtering method were recommended for intramedullary implants. For extramedullary implants, the most optimal coatings are the coatings formed by radio-frequency magnetron sputtering with an intermediate TiO2 sublayer.

AB - In the work the physical, mechanical and chemical properties of oxide and calcium-phosphate coatings formed by the microarc oxidation and radio-frequency magnetron sputtering methods, or their combination were studied. It is shown that combining the advantages of various technologies enables one to obtain a wide range of hybrid coatings used for various strategies of osteosynthesis. The calcium phosphate coatings obtained by the radio-frequency magnetron sputtering methods were chosen as coatings on cortical screws. The hybrid coatings obtained by a combination of microarc oxidation method and radio-frequency magnetron sputtering method were recommended for intramedullary implants. For extramedullary implants, the most optimal coatings are the coatings formed by radio-frequency magnetron sputtering with an intermediate TiO2 sublayer.

UR - http://www.scopus.com/inward/record.url?scp=85041692666&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041692666&partnerID=8YFLogxK

U2 - 10.1063/1.5001611

DO - 10.1063/1.5001611

M3 - Conference contribution

AN - SCOPUS:85041692666

VL - 1882

BT - Physics of Cancer

A2 - Gutmanas, Elazar Y.

A2 - Naimark, Oleg B.

A2 - Sharkeev, Yurii P.

PB - American Institute of Physics Inc.

ER -