Comparative Analysis of Properties of the Carbon-Based Coatings Obtained through Various PVD and CVD Deposition Methods

D. V. Korzhenko, Y. N. Yurjev, D. R. Emlin, S. A. Plotnikov, A. B. Vladimirov, I. Y. Romanov, B. A. Loginov, A. B. Loginov

Research output: Contribution to journalConference article

Abstract

The paper examines carbon 0.5-1 thick coatings obtained through various physical vapour deposition and chemical vapour deposition methods on stainless steel and tool steel substrates. Their composition, morphology and physical properties have also been studied. The correlations of erosive wear resistance and H3/E2 ratio (where H is hardness and E is elastic modulus) have been identified for carbon coatings in regards to the production method. Ta-C carbon coatings demonstrate high resistance to dynamic loads with erosive wear in a sand-blast machine.

Original languageEnglish
Article number012006
JournalJournal of Physics: Conference Series
Volume1443
Issue number1
DOIs
Publication statusPublished - 7 Jan 2020
EventInternational Conference for Young Scientists on Issues of Physics and Technology in Science, Power Industry and Medicine 2019, IPTSPIM 2019 - Tomsk, Russian Federation
Duration: 30 Sep 20195 Oct 2019

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Comparative Analysis of Properties of the Carbon-Based Coatings Obtained through Various PVD and CVD Deposition Methods'. Together they form a unique fingerprint.

  • Cite this