Abstract
The design and testing results were described of electron accelerator based on pulse transformer with high-voltage unit vacuum insulation. The output pulse of the transformer was up to 150 kV. The current pulses of up to 5 mA and ≈200 ns length at the electron energy in output beam of ≈60 keV were obtained. The electron beam energy was sufficient for colouring alkaline-haloid crystals, while the irradiation of fluoroplastic for several minutes caused structural transformations in it. When testing accelerator mockup the break-downs from winding last turn to camera were observed. These break-downs were probably connected with the organic substance presence in operating zone. The service life and pulse recurrence rate were limited by K15-4-40 condensator serviceablity in shaping line.
| Original language | English |
|---|---|
| Pages (from-to) | 171-172 |
| Number of pages | 2 |
| Journal | Pribory i Tekhnika Eksperimenta |
| Issue number | 2 |
| Publication status | Published - 1 Mar 1991 |
Fingerprint
ASJC Scopus subject areas
- Instrumentation
Cite this
Compact 150 kV electron accelerator. / Kassirov, G. M.; Sekisov, F. G.; Shumilova, N. N.
In: Pribory i Tekhnika Eksperimenta, No. 2, 01.03.1991, p. 171-172.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Compact 150 kV electron accelerator
AU - Kassirov, G. M.
AU - Sekisov, F. G.
AU - Shumilova, N. N.
PY - 1991/3/1
Y1 - 1991/3/1
N2 - The design and testing results were described of electron accelerator based on pulse transformer with high-voltage unit vacuum insulation. The output pulse of the transformer was up to 150 kV. The current pulses of up to 5 mA and ≈200 ns length at the electron energy in output beam of ≈60 keV were obtained. The electron beam energy was sufficient for colouring alkaline-haloid crystals, while the irradiation of fluoroplastic for several minutes caused structural transformations in it. When testing accelerator mockup the break-downs from winding last turn to camera were observed. These break-downs were probably connected with the organic substance presence in operating zone. The service life and pulse recurrence rate were limited by K15-4-40 condensator serviceablity in shaping line.
AB - The design and testing results were described of electron accelerator based on pulse transformer with high-voltage unit vacuum insulation. The output pulse of the transformer was up to 150 kV. The current pulses of up to 5 mA and ≈200 ns length at the electron energy in output beam of ≈60 keV were obtained. The electron beam energy was sufficient for colouring alkaline-haloid crystals, while the irradiation of fluoroplastic for several minutes caused structural transformations in it. When testing accelerator mockup the break-downs from winding last turn to camera were observed. These break-downs were probably connected with the organic substance presence in operating zone. The service life and pulse recurrence rate were limited by K15-4-40 condensator serviceablity in shaping line.
UR - http://www.scopus.com/inward/record.url?scp=0026125193&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0026125193&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0026125193
SP - 171
EP - 172
JO - Pribory i Tekhnika Eksperimenta
JF - Pribory i Tekhnika Eksperimenta
SN - 0032-8162
IS - 2
ER -