Cascade interference switches in active microwave compressors

S. Gorev, S. Artemenko, V. Avgustinovich, V. Igumnov, V. Kaminsky, S. Novikov, Yury Georgievich Yushkov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The switching element is usually located in the area of maximum electric field strength and the desire to put it in the area of lower field strength, but keeping the same efficiency and steadiness, of operation is quite understood. Presumably a cascade switch might provide the required way of operation. Two designs of cascade switches were examined. The first one was formed by waveguide tees connected in a way when a direct input arm of a next tee is connected to a side arm of a preceding tee. The second was a set of tees connected in series through their direct arms. It was shown that the considerable decrease of the switched power value and the increase of the output power and stability of the output pulse parameters can be provided.

Original languageEnglish
Title of host publication24th Russian Particle Accelerator Conference, RuPAC 2014
PublisherJoint Accelerator Conferences Website (JACoW)
Pages180-182
Number of pages3
ISBN (Print)9783954501700
Publication statusPublished - 2014
Event24th Russian Particle Accelerator Conference, RuPAC 2014 - Obninsk, Russian Federation
Duration: 6 Oct 201410 Oct 2014

Other

Other24th Russian Particle Accelerator Conference, RuPAC 2014
CountryRussian Federation
CityObninsk
Period6.10.1410.10.14

    Fingerprint

ASJC Scopus subject areas

  • Nuclear and High Energy Physics

Cite this

Gorev, S., Artemenko, S., Avgustinovich, V., Igumnov, V., Kaminsky, V., Novikov, S., & Yushkov, Y. G. (2014). Cascade interference switches in active microwave compressors. In 24th Russian Particle Accelerator Conference, RuPAC 2014 (pp. 180-182). Joint Accelerator Conferences Website (JACoW).