Calculation of the Intensity of Adhesive-Fatigue Wear of Cutting Tools

V. Bibik, N. Ivushkina, D. Arhipova

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)


On the base of kinetic equation of strength the authors suggest the method carbide tools wear intensity calculation allowing comparing wear resistance basing on tool material thermal diffusivity coefficient. The authors obtain equations of tool wear resistance dependences upon its thermal diffusivity which show close correlation between these parameters. The results of wear intensity calculations correspond well to the experimental results under the cutting rates corresponding to the region of adhesive-fatigue wear. The inserts with low thermal diffusivity coefficient are characterized by lower wear rate at the inial and normal stages of wear.

Original languageEnglish
Article number012055
JournalIOP Conference Series: Materials Science and Engineering
Issue number1
Publication statusPublished - 2 Sep 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Calculation of the Intensity of Adhesive-Fatigue Wear of Cutting Tools'. Together they form a unique fingerprint.

Cite this