Bubble size analysis generated on the submerged orifice, depending on the gas supply mode

Sergey Goldaev, Sergey Basalaev, Kirill Afanasyev

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

A numerical analysis of an algebraic equation of the fifth degree describing the achievement of the diameter of a gas bubble at an aperture is made, the results obtained earlier for limiting cases by simplifying the initial equation and solving it by an analytical method are refined and generalized. With the help of the ratio of the Froude criterion to the Weber criterion, the boundaries of realization of the static, transient and dynamic regimes are established. Approximating formulas are proposed for these regimes, which, with an allowable error in the performance of applied calculations, make it possible to find the value of the detachment diameter of the bubble.

Original languageEnglish
Article number01033
JournalMATEC Web of Conferences
Volume110
DOIs
Publication statusPublished - 19 Jun 2017
EventInternational Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment, HMTTSC 2017 - Tomsk, Russian Federation
Duration: 26 Apr 201728 Apr 2017

Fingerprint

Gas supply
Orifices
Numerical analysis
Gases

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Cite this

Bubble size analysis generated on the submerged orifice, depending on the gas supply mode. / Goldaev, Sergey; Basalaev, Sergey; Afanasyev, Kirill.

In: MATEC Web of Conferences, Vol. 110, 01033, 19.06.2017.

Research output: Contribution to journalArticle

@article{e8e496f296d8412d97ac01b994578fae,
title = "Bubble size analysis generated on the submerged orifice, depending on the gas supply mode",
abstract = "A numerical analysis of an algebraic equation of the fifth degree describing the achievement of the diameter of a gas bubble at an aperture is made, the results obtained earlier for limiting cases by simplifying the initial equation and solving it by an analytical method are refined and generalized. With the help of the ratio of the Froude criterion to the Weber criterion, the boundaries of realization of the static, transient and dynamic regimes are established. Approximating formulas are proposed for these regimes, which, with an allowable error in the performance of applied calculations, make it possible to find the value of the detachment diameter of the bubble.",
author = "Sergey Goldaev and Sergey Basalaev and Kirill Afanasyev",
year = "2017",
month = "6",
day = "19",
doi = "10.1051/matecconf/201711001033",
language = "English",
volume = "110",
journal = "MATEC Web of Conferences",

}

TY - JOUR

T1 - Bubble size analysis generated on the submerged orifice, depending on the gas supply mode

AU - Goldaev, Sergey

AU - Basalaev, Sergey

AU - Afanasyev, Kirill

PY - 2017/6/19

Y1 - 2017/6/19

N2 - A numerical analysis of an algebraic equation of the fifth degree describing the achievement of the diameter of a gas bubble at an aperture is made, the results obtained earlier for limiting cases by simplifying the initial equation and solving it by an analytical method are refined and generalized. With the help of the ratio of the Froude criterion to the Weber criterion, the boundaries of realization of the static, transient and dynamic regimes are established. Approximating formulas are proposed for these regimes, which, with an allowable error in the performance of applied calculations, make it possible to find the value of the detachment diameter of the bubble.

AB - A numerical analysis of an algebraic equation of the fifth degree describing the achievement of the diameter of a gas bubble at an aperture is made, the results obtained earlier for limiting cases by simplifying the initial equation and solving it by an analytical method are refined and generalized. With the help of the ratio of the Froude criterion to the Weber criterion, the boundaries of realization of the static, transient and dynamic regimes are established. Approximating formulas are proposed for these regimes, which, with an allowable error in the performance of applied calculations, make it possible to find the value of the detachment diameter of the bubble.

UR - http://www.scopus.com/inward/record.url?scp=85021347477&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021347477&partnerID=8YFLogxK

U2 - 10.1051/matecconf/201711001033

DO - 10.1051/matecconf/201711001033

M3 - Article

VL - 110

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 01033

ER -