Beam test proposal of an odr BEAM size monitor at SLAC FFTB

Yasuo Fukui, David Cline, Feng Zhou, Marc Ross, Paul Bolton, Junji Urakawa, Makoto Tobiyama, Toshiya Muto, Pavel Vladimirovich Karataev, Alexander Aryshev, Ryosuke Hamatsu, Alexander Potylitsyn, Gennady Naumenko, A. Sharafutdinov

Research School of High-Energy Physics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

ODR(Optical Diffraction Radiation) transverse beam size measurement at the SLAC FFTB at 28.5 GeV is a challenge and it requires special target and optics system, which is much difficult than the conventional ODR beam size measurement. We propose to use a curved disphased conductive slit target to recover the sensitivity in the measurement of the single bunch transverse beam size by using ODR photons from a conductive slit. In order to cancel the effect of the beam divergence, the conductive slit target surface must be curved. Also, we can obtain the focused interference pattern of the ODR photons at the detector at the shorter distance from the target than the γ²λ, by using lens optics system.

Original language	English
Title of host publication	Proceedings of the IEEE Particle Accelerator Conference
Pages	4015-4017
Number of pages	3
Volume	2005
DOIs	https://doi.org/10.1109/PAC.2005.1591701
Publication status	Published - 2005
Event	Particle Accelerator Conference, PAC 2005 - Knoxville, TN, United States Duration: 16 May 2005 → 20 May 2005

Other

Other	Particle Accelerator Conference, PAC 2005
Country	United States
City	Knoxville, TN
Period	16.5.05 → 20.5.05

Fingerprint

ASJC Scopus subject areas

Engineering(all)

Cite this

Fukui, Y., Cline, D., Zhou, F., Ross, M., Bolton, P., Urakawa, J., ... Sharafutdinov, A. (2005). Beam test proposal of an odr BEAM size monitor at SLAC FFTB. In Proceedings of the IEEE Particle Accelerator Conference (Vol. 2005, pp. 4015-4017). [1591701] https://doi.org/10.1109/PAC.2005.1591701

Beam test proposal of an odr BEAM size monitor at SLAC FFTB. / Fukui, Yasuo; Cline, David; Zhou, Feng; Ross, Marc; Bolton, Paul; Urakawa, Junji; Tobiyama, Makoto; Muto, Toshiya; Karataev, Pavel Vladimirovich; Aryshev, Alexander; Hamatsu, Ryosuke; Potylitsyn, Alexander ; Naumenko, Gennady; Sharafutdinov, A.

Proceedings of the IEEE Particle Accelerator Conference. Vol. 2005 2005. p. 4015-4017 1591701.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fukui, Y, Cline, D, Zhou, F, Ross, M, Bolton, P, Urakawa, J, Tobiyama, M, Muto, T, Karataev, PV, Aryshev, A, Hamatsu, R, Potylitsyn, A , Naumenko, G & Sharafutdinov, A 2005, Beam test proposal of an odr BEAM size monitor at SLAC FFTB. in Proceedings of the IEEE Particle Accelerator Conference. vol. 2005, 1591701, pp. 4015-4017, Particle Accelerator Conference, PAC 2005, Knoxville, TN, United States, 16.5.05. https://doi.org/10.1109/PAC.2005.1591701

Fukui, Yasuo ; Cline, David ; Zhou, Feng ; Ross, Marc ; Bolton, Paul ; Urakawa, Junji ; Tobiyama, Makoto ; Muto, Toshiya ; Karataev, Pavel Vladimirovich ; Aryshev, Alexander ; Hamatsu, Ryosuke ; Potylitsyn, Alexander ; Naumenko, Gennady ; Sharafutdinov, A. / Beam test proposal of an odr BEAM size monitor at SLAC FFTB. Proceedings of the IEEE Particle Accelerator Conference. Vol. 2005 2005. pp. 4015-4017

@inproceedings{95c87a0c2f3b4ccfa0ed21367f256d95,

title = "Beam test proposal of an odr BEAM size monitor at SLAC FFTB",

abstract = "ODR(Optical Diffraction Radiation) transverse beam size measurement at the SLAC FFTB at 28.5 GeV is a challenge and it requires special target and optics system, which is much difficult than the conventional ODR beam size measurement. We propose to use a curved disphased conductive slit target to recover the sensitivity in the measurement of the single bunch transverse beam size by using ODR photons from a conductive slit. In order to cancel the effect of the beam divergence, the conductive slit target surface must be curved. Also, we can obtain the focused interference pattern of the ODR photons at the detector at the shorter distance from the target than the γ2λ, by using lens optics system.",

author = "Yasuo Fukui and David Cline and Feng Zhou and Marc Ross and Paul Bolton and Junji Urakawa and Makoto Tobiyama and Toshiya Muto and Karataev, {Pavel Vladimirovich} and Alexander Aryshev and Ryosuke Hamatsu and Alexander Potylitsyn and Gennady Naumenko and A. Sharafutdinov",

year = "2005",

doi = "10.1109/PAC.2005.1591701",

language = "English",

isbn = "0780388593",

volume = "2005",

pages = "4015--4017",

booktitle = "Proceedings of the IEEE Particle Accelerator Conference",

note = "Particle Accelerator Conference, PAC 2005 ; Conference date: 16-05-2005 Through 20-05-2005",

}

TY - GEN

T1 - Beam test proposal of an odr BEAM size monitor at SLAC FFTB

AU - Fukui, Yasuo

AU - Cline, David

AU - Zhou, Feng

AU - Ross, Marc

AU - Bolton, Paul

AU - Urakawa, Junji

AU - Tobiyama, Makoto

AU - Muto, Toshiya

AU - Karataev, Pavel Vladimirovich

AU - Aryshev, Alexander

AU - Hamatsu, Ryosuke

AU - Potylitsyn, Alexander

AU - Naumenko, Gennady

AU - Sharafutdinov, A.

PY - 2005

Y1 - 2005

N2 - ODR(Optical Diffraction Radiation) transverse beam size measurement at the SLAC FFTB at 28.5 GeV is a challenge and it requires special target and optics system, which is much difficult than the conventional ODR beam size measurement. We propose to use a curved disphased conductive slit target to recover the sensitivity in the measurement of the single bunch transverse beam size by using ODR photons from a conductive slit. In order to cancel the effect of the beam divergence, the conductive slit target surface must be curved. Also, we can obtain the focused interference pattern of the ODR photons at the detector at the shorter distance from the target than the γ2λ, by using lens optics system.

AB - ODR(Optical Diffraction Radiation) transverse beam size measurement at the SLAC FFTB at 28.5 GeV is a challenge and it requires special target and optics system, which is much difficult than the conventional ODR beam size measurement. We propose to use a curved disphased conductive slit target to recover the sensitivity in the measurement of the single bunch transverse beam size by using ODR photons from a conductive slit. In order to cancel the effect of the beam divergence, the conductive slit target surface must be curved. Also, we can obtain the focused interference pattern of the ODR photons at the detector at the shorter distance from the target than the γ2λ, by using lens optics system.

UR - http://www.scopus.com/inward/record.url?scp=33847126230&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847126230&partnerID=8YFLogxK

U2 - 10.1109/PAC.2005.1591701

DO - 10.1109/PAC.2005.1591701

M3 - Conference contribution

AN - SCOPUS:33847126230

SN - 0780388593

SN - 9780780388598

VL - 2005

SP - 4015

EP - 4017

BT - Proceedings of the IEEE Particle Accelerator Conference

T2 - Particle Accelerator Conference, PAC 2005

Y2 - 16 May 2005 through 20 May 2005

ER -

Access to Document

10.1109/PAC.2005.1591701