Analyzing the Technology of Using Ash and Slag Waste from Thermal Power Plants in the Production of Building Ceramics

A. G. Malchik, S. V. Litovkin, P. V. Rodionov, V. V. Kozik, M. A. Gaydamak

    Research output: Contribution to journalArticle

    3 Citations (Scopus)

    Abstract

    The work describes the problem of impounding and storing ash and slag waste at coal thermal power plants in Russia. Recovery and recycling of ash and slag waste are analyzed. Activity of radionuclides, the chemical composition and particle sizes of ash and slag waste were determined; the acidity index, the basicity and the class of material were defined. The technology for making ceramic products with the addition of ash and slag waste was proposed. The dependencies relative to the percentage of ash and slag waste and the optimal parameters for baking were established. The obtained materials were tested for physical and mechanical properties, namely for water absorption, thermal conductivity and compression strength. Based on the findings, future prospects for use of ash and slag waste were identified.

    Original languageEnglish
    Article number012024
    JournalIOP Conference Series: Materials Science and Engineering
    Volume127
    Issue number1
    DOIs
    Publication statusPublished - 6 May 2016

    ASJC Scopus subject areas

    • Engineering(all)
    • Materials Science(all)

    Fingerprint Dive into the research topics of 'Analyzing the Technology of Using Ash and Slag Waste from Thermal Power Plants in the Production of Building Ceramics'. Together they form a unique fingerprint.

  • Cite this