Abstract
An interrelation between processing the surface of hard alloys with power ion beam, subsequent high-temperature oxidation and intensity of gas evolution under thermal stimulated desorption has been studied. The plates from the alloys VK8 and T14K8 were subjected to the study by the method of thermoprogrammed desorption. The results are presented on lathe cutting of the chromium-nickel steel Kh18N10T by cutters from the hard alloy VK8 and the tool steel Kh6VF by cutters from the hard alloy T14K8.
| Original language | English |
|---|---|
| Pages (from-to) | 32-35 |
| Number of pages | 4 |
| Journal | Fizika i Khimiya Obrabotki Materialov |
| Issue number | 1 |
| Publication status | Published - 2002 |
Fingerprint
ASJC Scopus subject areas
- Materials Science(all)
Cite this
An investigation of the effect of tool materials treatment with power ion beam on gas desorption processes. / Nesterenko, V. P.; Aref'ev, K. P.; Merkulov, V. I.; Tyurin, Yu I.; Remnev, G. E.
In: Fizika i Khimiya Obrabotki Materialov, No. 1, 2002, p. 32-35.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - An investigation of the effect of tool materials treatment with power ion beam on gas desorption processes
AU - Nesterenko, V. P.
AU - Aref'ev, K. P.
AU - Merkulov, V. I.
AU - Tyurin, Yu I.
AU - Remnev, G. E.
PY - 2002
Y1 - 2002
N2 - An interrelation between processing the surface of hard alloys with power ion beam, subsequent high-temperature oxidation and intensity of gas evolution under thermal stimulated desorption has been studied. The plates from the alloys VK8 and T14K8 were subjected to the study by the method of thermoprogrammed desorption. The results are presented on lathe cutting of the chromium-nickel steel Kh18N10T by cutters from the hard alloy VK8 and the tool steel Kh6VF by cutters from the hard alloy T14K8.
AB - An interrelation between processing the surface of hard alloys with power ion beam, subsequent high-temperature oxidation and intensity of gas evolution under thermal stimulated desorption has been studied. The plates from the alloys VK8 and T14K8 were subjected to the study by the method of thermoprogrammed desorption. The results are presented on lathe cutting of the chromium-nickel steel Kh18N10T by cutters from the hard alloy VK8 and the tool steel Kh6VF by cutters from the hard alloy T14K8.
UR - http://www.scopus.com/inward/record.url?scp=0036035058&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0036035058&partnerID=8YFLogxK
M3 - Article
SP - 32
EP - 35
JO - Fizika i Khimiya Obrabotki Materialov
JF - Fizika i Khimiya Obrabotki Materialov
SN - 0015-3214
IS - 1
ER -