A simple approach of presampled modulation transfer function measurement tested on the phoenix nanotom scanner

D. Ivashkov, A. Batranin, T. Mamyrbayev

Research output: Contribution to journalConference article

Abstract

In this paper presampled modulation transfer function of the 2D images obtained on the Phoenix Nanotom scanner was investigated with different measurement set-ups. Three parameters were chosen to investigate their influence on modulation transfer function: source- detector distance, tube current and binning mode. A simple method for modulation transfer function determination of digital imaging detectors from edge images was applied. The following results were achieved and briefly discussed: modulation transfer function improves with increase of the source-detector distance, slightly improves with increase of the current and remains constant for different binning modes. All measurements were carried out in University of Applied Sciences Upper Austria at Wels campus.

Original languageEnglish
Article number012021
JournalJournal of Physics: Conference Series
Volume671
Issue number1
DOIs
Publication statusPublished - 18 Jan 2016
Event3rd All-Russian Scientific and Practical Conference on Innovations in Non-Destructive Testing, SibTest 2015 - Altai, Russian Federation
Duration: 27 Jul 201531 Jul 2015

Fingerprint

Phoenix (AZ)
modulation transfer function
scanners
detectors
Austria
tubes

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

A simple approach of presampled modulation transfer function measurement tested on the phoenix nanotom scanner. / Ivashkov, D.; Batranin, A.; Mamyrbayev, T.

In: Journal of Physics: Conference Series, Vol. 671, No. 1, 012021, 18.01.2016.

Research output: Contribution to journalConference article

@article{5b6223dd66ee4d75b12957c4f0c123e8,
title = "A simple approach of presampled modulation transfer function measurement tested on the phoenix nanotom scanner",
abstract = "In this paper presampled modulation transfer function of the 2D images obtained on the Phoenix Nanotom scanner was investigated with different measurement set-ups. Three parameters were chosen to investigate their influence on modulation transfer function: source- detector distance, tube current and binning mode. A simple method for modulation transfer function determination of digital imaging detectors from edge images was applied. The following results were achieved and briefly discussed: modulation transfer function improves with increase of the source-detector distance, slightly improves with increase of the current and remains constant for different binning modes. All measurements were carried out in University of Applied Sciences Upper Austria at Wels campus.",
author = "D. Ivashkov and A. Batranin and T. Mamyrbayev",
year = "2016",
month = "1",
day = "18",
doi = "10.1088/1742-6596/671/1/012021",
language = "English",
volume = "671",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - A simple approach of presampled modulation transfer function measurement tested on the phoenix nanotom scanner

AU - Ivashkov, D.

AU - Batranin, A.

AU - Mamyrbayev, T.

PY - 2016/1/18

Y1 - 2016/1/18

N2 - In this paper presampled modulation transfer function of the 2D images obtained on the Phoenix Nanotom scanner was investigated with different measurement set-ups. Three parameters were chosen to investigate their influence on modulation transfer function: source- detector distance, tube current and binning mode. A simple method for modulation transfer function determination of digital imaging detectors from edge images was applied. The following results were achieved and briefly discussed: modulation transfer function improves with increase of the source-detector distance, slightly improves with increase of the current and remains constant for different binning modes. All measurements were carried out in University of Applied Sciences Upper Austria at Wels campus.

AB - In this paper presampled modulation transfer function of the 2D images obtained on the Phoenix Nanotom scanner was investigated with different measurement set-ups. Three parameters were chosen to investigate their influence on modulation transfer function: source- detector distance, tube current and binning mode. A simple method for modulation transfer function determination of digital imaging detectors from edge images was applied. The following results were achieved and briefly discussed: modulation transfer function improves with increase of the source-detector distance, slightly improves with increase of the current and remains constant for different binning modes. All measurements were carried out in University of Applied Sciences Upper Austria at Wels campus.

UR - http://www.scopus.com/inward/record.url?scp=84960193892&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960193892&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/671/1/012021

DO - 10.1088/1742-6596/671/1/012021

M3 - Conference article

AN - SCOPUS:84960193892

VL - 671

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012021

ER -