A power supply for pulsed electron beam sources

Division for Electronic Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

A power supply for pulsed low-energy electron beam sources using explosive-emission pool cathodes is described. The device is based on an inductive switching converter that acts as a controlled current source. The converter features a 500 W output power, 1 kV maximum voltage across the primary storage, 1 kHz discharge repetition rate, and 1 μF storage capacitance.

Original language	English
Pages (from-to)	365-367
Number of pages	3
Journal	Instruments and Experimental Techniques
Volume	41
Issue number	3
Publication status	Published - 1998

ASJC Scopus subject areas

Instrumentation

Fingerprint Dive into the research topics of 'A power supply for pulsed electron beam sources'. Together they form a unique fingerprint.

Cite this

@article{e3e7ead5b3964df98d0f5d5026d73488,

title = "A power supply for pulsed electron beam sources",

abstract = "A power supply for pulsed low-energy electron beam sources using explosive-emission pool cathodes is described. The device is based on an inductive switching converter that acts as a controlled current source. The converter features a 500 W output power, 1 kV maximum voltage across the primary storage, 1 kHz discharge repetition rate, and 1 μF storage capacitance.",

author = "Baginskii, {B. A.} and Burkin, {E. Yu}",

year = "1998",

language = "English",

volume = "41",

pages = "365--367",

journal = "Instruments and Experimental Techniques",

issn = "0020-4412",

publisher = "Maik Nauka-Interperiodica Publishing",

number = "3",

}

TY - JOUR

T1 - A power supply for pulsed electron beam sources

AU - Baginskii, B. A.

AU - Burkin, E. Yu

PY - 1998

Y1 - 1998

N2 - A power supply for pulsed low-energy electron beam sources using explosive-emission pool cathodes is described. The device is based on an inductive switching converter that acts as a controlled current source. The converter features a 500 W output power, 1 kV maximum voltage across the primary storage, 1 kHz discharge repetition rate, and 1 μF storage capacitance.

AB - A power supply for pulsed low-energy electron beam sources using explosive-emission pool cathodes is described. The device is based on an inductive switching converter that acts as a controlled current source. The converter features a 500 W output power, 1 kV maximum voltage across the primary storage, 1 kHz discharge repetition rate, and 1 μF storage capacitance.

UR - http://www.scopus.com/inward/record.url?scp=27544456501&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27544456501&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:27544456501

VL - 41

SP - 365

EP - 367

JO - Instruments and Experimental Techniques

JF - Instruments and Experimental Techniques

SN - 0020-4412

IS - 3

ER -