A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating

Ruslan Revovich Balokhonov, V. A. Romanova, S. Schmauder, S. A. Martynov, Zh G. Kovalevskaya

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

The deformation and fracture of a coated material with an interlayer is investigated. A dynamic boundary-value problem in a plane strain formulation is solved numerically by the finite-difference method. The mechanical responses of a steel substrate, interlayer material and iron-boride coating is simulated by means of an isotropic strain-hardening model and a fracture criterion taking into account crack initiation and growth in regions experiencing tensile stresses. Numerical experiments on tension and compression of two- and three-phase microstructures were conducted. The average mechanical properties of the interlayer material are considered. The coating-interlayer and interlayer-substrate interface geometries correspond to configurations found experimentally and are accounted for explicitly in the calculations. Local regions of bulk tension are shown to form near the interfaces even under simple uniaxial compression of coated materials, which controls the fracture mechanisms at the mesoscale level. The influence of the interlayer on macroscopic homogenized strength of coated materials and on localized plastic flow and cracking patterns is examined.

Original languageEnglish
Pages (from-to)276-286
Number of pages11
JournalComposites Part B: Engineering
Volume66
DOIs
Publication statusPublished - 1 Jan 2014

Fingerprint

Coated materials
Plastic deformation
Coatings
Boride coatings
Steel
Substrates
Plastic flow
Strain hardening
Crack initiation
Finite difference method
Tensile stress
Boundary value problems
Crack propagation
Compaction
Iron
Mechanical properties
Microstructure
Geometry
Experiments

Keywords

  • A. Layered structures
  • B. Fracture
  • B. Plastic deformation
  • B. Stress concentrations
  • C. Computational modelling

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating. / Balokhonov, Ruslan Revovich; Romanova, V. A.; Schmauder, S.; Martynov, S. A.; Kovalevskaya, Zh G.

In: Composites Part B: Engineering, Vol. 66, 01.01.2014, p. 276-286.

Research output: Contribution to journalArticle

Balokhonov, Ruslan Revovich ; Romanova, V. A. ; Schmauder, S. ; Martynov, S. A. ; Kovalevskaya, Zh G. / A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating. In: Composites Part B: Engineering. 2014 ; Vol. 66. pp. 276-286.
@article{ab44832b6279477cb8b67a2b93e434df,
title = "A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating",
abstract = "The deformation and fracture of a coated material with an interlayer is investigated. A dynamic boundary-value problem in a plane strain formulation is solved numerically by the finite-difference method. The mechanical responses of a steel substrate, interlayer material and iron-boride coating is simulated by means of an isotropic strain-hardening model and a fracture criterion taking into account crack initiation and growth in regions experiencing tensile stresses. Numerical experiments on tension and compression of two- and three-phase microstructures were conducted. The average mechanical properties of the interlayer material are considered. The coating-interlayer and interlayer-substrate interface geometries correspond to configurations found experimentally and are accounted for explicitly in the calculations. Local regions of bulk tension are shown to form near the interfaces even under simple uniaxial compression of coated materials, which controls the fracture mechanisms at the mesoscale level. The influence of the interlayer on macroscopic homogenized strength of coated materials and on localized plastic flow and cracking patterns is examined.",
keywords = "A. Layered structures, B. Fracture, B. Plastic deformation, B. Stress concentrations, C. Computational modelling",
author = "Ruslan Revovich Balokhonov and Romanova, {V. A.} and S. Schmauder and Martynov, {S. A.} and Kovalevskaya, {Zh G.}",
year = "2014",
month = "1",
day = "1",
doi = "10.1016/j.compositesb.2014.05.020",
language = "English",
volume = "66",
pages = "276--286",
journal = "Composites Part B: Engineering",
issn = "1359-8368",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating

AU - Balokhonov, Ruslan Revovich

AU - Romanova, V. A.

AU - Schmauder, S.

AU - Martynov, S. A.

AU - Kovalevskaya, Zh G.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The deformation and fracture of a coated material with an interlayer is investigated. A dynamic boundary-value problem in a plane strain formulation is solved numerically by the finite-difference method. The mechanical responses of a steel substrate, interlayer material and iron-boride coating is simulated by means of an isotropic strain-hardening model and a fracture criterion taking into account crack initiation and growth in regions experiencing tensile stresses. Numerical experiments on tension and compression of two- and three-phase microstructures were conducted. The average mechanical properties of the interlayer material are considered. The coating-interlayer and interlayer-substrate interface geometries correspond to configurations found experimentally and are accounted for explicitly in the calculations. Local regions of bulk tension are shown to form near the interfaces even under simple uniaxial compression of coated materials, which controls the fracture mechanisms at the mesoscale level. The influence of the interlayer on macroscopic homogenized strength of coated materials and on localized plastic flow and cracking patterns is examined.

AB - The deformation and fracture of a coated material with an interlayer is investigated. A dynamic boundary-value problem in a plane strain formulation is solved numerically by the finite-difference method. The mechanical responses of a steel substrate, interlayer material and iron-boride coating is simulated by means of an isotropic strain-hardening model and a fracture criterion taking into account crack initiation and growth in regions experiencing tensile stresses. Numerical experiments on tension and compression of two- and three-phase microstructures were conducted. The average mechanical properties of the interlayer material are considered. The coating-interlayer and interlayer-substrate interface geometries correspond to configurations found experimentally and are accounted for explicitly in the calculations. Local regions of bulk tension are shown to form near the interfaces even under simple uniaxial compression of coated materials, which controls the fracture mechanisms at the mesoscale level. The influence of the interlayer on macroscopic homogenized strength of coated materials and on localized plastic flow and cracking patterns is examined.

KW - A. Layered structures

KW - B. Fracture

KW - B. Plastic deformation

KW - B. Stress concentrations

KW - C. Computational modelling

UR - http://www.scopus.com/inward/record.url?scp=84903175443&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903175443&partnerID=8YFLogxK

U2 - 10.1016/j.compositesb.2014.05.020

DO - 10.1016/j.compositesb.2014.05.020

M3 - Article

VL - 66

SP - 276

EP - 286

JO - Composites Part B: Engineering

JF - Composites Part B: Engineering

SN - 1359-8368

ER -