9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system

Oleg V. Stukach, Arman B. Mirmanov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

This paper describes the power stage of downlink of measurement-while-drilling (MWD) telemetry system. Design of this system is modern direction in geo- and radiophysics due transition to a new communication channel between drilling point to surface. The device is the X-band Gunn diode hybrid-integrated power amplifier-transmitter. Its advantage is high efficiently and low current from bias. The pulse output power is about 15 Watt in short-pulse operating conditions, at 9 GHz central lobe frequency. Due to the MWD application, the special attention pays to circuit and repeatability of characteristics. Design and packaging is very tight and give a possibility to put device into the drilling gun. The experimental bench and some measurement results are presented in the paper. In particular, output power and frequency of the center lobe as function of voltage and current of transmitter is shown.

Original languageEnglish
Title of host publication2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Print)9781479964055
DOIs
Publication statusPublished - 9 Jan 2015
Event2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Omsk, Russian Federation
Duration: 11 Nov 201413 Nov 2014

Other

Other2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014
CountryRussian Federation
CityOmsk
Period11.11.1413.11.14

Fingerprint

Gunn diodes
Power amplifiers
Transmitters
Drilling
Telemetering
Packaging
Networks (circuits)
Electric potential

Keywords

  • Gunn diode
  • measurement-while-drilling
  • microwave pulse generator
  • power transmitter
  • stability of parameters

ASJC Scopus subject areas

  • Computational Mechanics
  • Control and Systems Engineering
  • Aerospace Engineering
  • Automotive Engineering

Cite this

Stukach, O. V., & Mirmanov, A. B. (2015). 9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system. In 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings [7005695] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/Dynamics.2014.7005695

9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system. / Stukach, Oleg V.; Mirmanov, Arman B.

2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. 7005695.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stukach, OV & Mirmanov, AB 2015, 9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system. in 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings., 7005695, Institute of Electrical and Electronics Engineers Inc., 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014, Omsk, Russian Federation, 11.11.14. https://doi.org/10.1109/Dynamics.2014.7005695
Stukach OV, Mirmanov AB. 9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system. In 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2015. 7005695 https://doi.org/10.1109/Dynamics.2014.7005695
Stukach, Oleg V. ; Mirmanov, Arman B. / 9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system. 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015.
@inproceedings{06841100b2494c50800fd3ad4bb98217,
title = "9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system",
abstract = "This paper describes the power stage of downlink of measurement-while-drilling (MWD) telemetry system. Design of this system is modern direction in geo- and radiophysics due transition to a new communication channel between drilling point to surface. The device is the X-band Gunn diode hybrid-integrated power amplifier-transmitter. Its advantage is high efficiently and low current from bias. The pulse output power is about 15 Watt in short-pulse operating conditions, at 9 GHz central lobe frequency. Due to the MWD application, the special attention pays to circuit and repeatability of characteristics. Design and packaging is very tight and give a possibility to put device into the drilling gun. The experimental bench and some measurement results are presented in the paper. In particular, output power and frequency of the center lobe as function of voltage and current of transmitter is shown.",
keywords = "Gunn diode, measurement-while-drilling, microwave pulse generator, power transmitter, stability of parameters",
author = "Stukach, {Oleg V.} and Mirmanov, {Arman B.}",
year = "2015",
month = "1",
day = "9",
doi = "10.1109/Dynamics.2014.7005695",
language = "English",
isbn = "9781479964055",
booktitle = "2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - 9 GHz power amplifier-transmitter on Gunn diode for measurement-while-drilling system

AU - Stukach, Oleg V.

AU - Mirmanov, Arman B.

PY - 2015/1/9

Y1 - 2015/1/9

N2 - This paper describes the power stage of downlink of measurement-while-drilling (MWD) telemetry system. Design of this system is modern direction in geo- and radiophysics due transition to a new communication channel between drilling point to surface. The device is the X-band Gunn diode hybrid-integrated power amplifier-transmitter. Its advantage is high efficiently and low current from bias. The pulse output power is about 15 Watt in short-pulse operating conditions, at 9 GHz central lobe frequency. Due to the MWD application, the special attention pays to circuit and repeatability of characteristics. Design and packaging is very tight and give a possibility to put device into the drilling gun. The experimental bench and some measurement results are presented in the paper. In particular, output power and frequency of the center lobe as function of voltage and current of transmitter is shown.

AB - This paper describes the power stage of downlink of measurement-while-drilling (MWD) telemetry system. Design of this system is modern direction in geo- and radiophysics due transition to a new communication channel between drilling point to surface. The device is the X-band Gunn diode hybrid-integrated power amplifier-transmitter. Its advantage is high efficiently and low current from bias. The pulse output power is about 15 Watt in short-pulse operating conditions, at 9 GHz central lobe frequency. Due to the MWD application, the special attention pays to circuit and repeatability of characteristics. Design and packaging is very tight and give a possibility to put device into the drilling gun. The experimental bench and some measurement results are presented in the paper. In particular, output power and frequency of the center lobe as function of voltage and current of transmitter is shown.

KW - Gunn diode

KW - measurement-while-drilling

KW - microwave pulse generator

KW - power transmitter

KW - stability of parameters

UR - http://www.scopus.com/inward/record.url?scp=84922224770&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84922224770&partnerID=8YFLogxK

U2 - 10.1109/Dynamics.2014.7005695

DO - 10.1109/Dynamics.2014.7005695

M3 - Conference contribution

AN - SCOPUS:84922224770

SN - 9781479964055

BT - 2014 Dynamics of Systems, Mechanisms and Machines, Dynamics 2014 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -