15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system

Andrey S. Goponenko, Oleg V. Stukach, Arman B. Mirmanov, Vladislav A. Kochumeev

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

This paper describes the design of Gunn diode hybrid-integrated power transmitter at X-band. The device delivers about 15 Watt of pulse output power, in short-pulse operating conditions, at 9.5-10.5 GHz central frequency. The transmitter is designed to be used as final stage of a downlink measurement-while-drilling transmitter for telemetry system. A commercial Gunn diode has been selected for design. Due to the MWD application, special attention must be put on the process and reliability: to this aim temperature of the active device must be kept within the value established by borehole requirements and carefully controlled. This makes the design objective very tight. The power transmitter design and some measurement results are presented in the paper.

Original languageEnglish
Title of host publicationInternational Conference on Systems, Signals, and Image Processing
PublisherIEEE Computer Society
Pages243-246
Number of pages4
ISBN (Print)9789531841917
Publication statusPublished - 2014
Event21st International Conference on Systems, Signals and Image Processing, IWSSIP 2014 - Dubrovnik, Croatia
Duration: 12 May 201415 May 2014

Other

Other21st International Conference on Systems, Signals and Image Processing, IWSSIP 2014
CountryCroatia
CityDubrovnik
Period12.5.1415.5.14

Fingerprint

Gunn diodes
Transmitters
Drilling
Telemetering
Boreholes
Temperature

Keywords

  • Gunn diode characterization
  • measurement-while-drilling
  • microwave pulse generator
  • power transmitter
  • stability of parameters

ASJC Scopus subject areas

  • Artificial Intelligence
  • Computer Networks and Communications
  • Signal Processing
  • Software

Cite this

Goponenko, A. S., Stukach, O. V., Mirmanov, A. B., & Kochumeev, V. A. (2014). 15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system. In International Conference on Systems, Signals, and Image Processing (pp. 243-246). [6837676] IEEE Computer Society.

15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system. / Goponenko, Andrey S.; Stukach, Oleg V.; Mirmanov, Arman B.; Kochumeev, Vladislav A.

International Conference on Systems, Signals, and Image Processing. IEEE Computer Society, 2014. p. 243-246 6837676.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Goponenko, AS, Stukach, OV, Mirmanov, AB & Kochumeev, VA 2014, 15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system. in International Conference on Systems, Signals, and Image Processing., 6837676, IEEE Computer Society, pp. 243-246, 21st International Conference on Systems, Signals and Image Processing, IWSSIP 2014, Dubrovnik, Croatia, 12.5.14.
Goponenko AS, Stukach OV, Mirmanov AB, Kochumeev VA. 15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system. In International Conference on Systems, Signals, and Image Processing. IEEE Computer Society. 2014. p. 243-246. 6837676
Goponenko, Andrey S. ; Stukach, Oleg V. ; Mirmanov, Arman B. ; Kochumeev, Vladislav A. / 15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system. International Conference on Systems, Signals, and Image Processing. IEEE Computer Society, 2014. pp. 243-246
@inproceedings{98c323ff38ce471caba5953fe1f58afe,
title = "15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system",
abstract = "This paper describes the design of Gunn diode hybrid-integrated power transmitter at X-band. The device delivers about 15 Watt of pulse output power, in short-pulse operating conditions, at 9.5-10.5 GHz central frequency. The transmitter is designed to be used as final stage of a downlink measurement-while-drilling transmitter for telemetry system. A commercial Gunn diode has been selected for design. Due to the MWD application, special attention must be put on the process and reliability: to this aim temperature of the active device must be kept within the value established by borehole requirements and carefully controlled. This makes the design objective very tight. The power transmitter design and some measurement results are presented in the paper.",
keywords = "Gunn diode characterization, measurement-while-drilling, microwave pulse generator, power transmitter, stability of parameters",
author = "Goponenko, {Andrey S.} and Stukach, {Oleg V.} and Mirmanov, {Arman B.} and Kochumeev, {Vladislav A.}",
year = "2014",
language = "English",
isbn = "9789531841917",
pages = "243--246",
booktitle = "International Conference on Systems, Signals, and Image Processing",
publisher = "IEEE Computer Society",

}

TY - GEN

T1 - 15 watt high efficiency gunn diode transmitter for measurement-while- drilling wireless system

AU - Goponenko, Andrey S.

AU - Stukach, Oleg V.

AU - Mirmanov, Arman B.

AU - Kochumeev, Vladislav A.

PY - 2014

Y1 - 2014

N2 - This paper describes the design of Gunn diode hybrid-integrated power transmitter at X-band. The device delivers about 15 Watt of pulse output power, in short-pulse operating conditions, at 9.5-10.5 GHz central frequency. The transmitter is designed to be used as final stage of a downlink measurement-while-drilling transmitter for telemetry system. A commercial Gunn diode has been selected for design. Due to the MWD application, special attention must be put on the process and reliability: to this aim temperature of the active device must be kept within the value established by borehole requirements and carefully controlled. This makes the design objective very tight. The power transmitter design and some measurement results are presented in the paper.

AB - This paper describes the design of Gunn diode hybrid-integrated power transmitter at X-band. The device delivers about 15 Watt of pulse output power, in short-pulse operating conditions, at 9.5-10.5 GHz central frequency. The transmitter is designed to be used as final stage of a downlink measurement-while-drilling transmitter for telemetry system. A commercial Gunn diode has been selected for design. Due to the MWD application, special attention must be put on the process and reliability: to this aim temperature of the active device must be kept within the value established by borehole requirements and carefully controlled. This makes the design objective very tight. The power transmitter design and some measurement results are presented in the paper.

KW - Gunn diode characterization

KW - measurement-while-drilling

KW - microwave pulse generator

KW - power transmitter

KW - stability of parameters

UR - http://www.scopus.com/inward/record.url?scp=84903986624&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903986624&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84903986624

SN - 9789531841917

SP - 243

EP - 246

BT - International Conference on Systems, Signals, and Image Processing

PB - IEEE Computer Society

ER -