• 105 Citations
  • 7 h-Index
20022019
If you made any changes in Pure these will be visible here soon.

Research Output 2002 2019

  • 105 Citations
  • 7 h-Index
  • 13 Article
  • 10 Conference contribution
  • 2 Conference article
2019

Selection of Technological Parameters of Selective Laser Melting of Mechanocomposite Ti–Nb Powder

Kovalevskaya, Z. G., Fedorov, V. V., Krinitsyn, M. G., Klochkov, N. S., Khimich, M. A. & Sharkeev, Y. P., 1 Jan 2019, In : Inorganic Materials: Applied Research. 10, 1, p. 19-23 5 p.

Research output: Contribution to journalArticle

Powders
Melting
Lasers
Substrates
Laser radiation
2017
10 Citations (Scopus)

Structure, phase composition and mechanical propertiesin bioinert zirconium-based alloy after severe plastic deformation

Eroshenko, A. Y., Mairambekova, A. M., Sharkeev, Y. P., Kovalevskaya, Z. G., Khimich, M. A. & Uvarkin, P. V., 1 Dec 2017, In : Letters on Materials. 7, 4, p. 469-472 4 p.

Research output: Contribution to journalArticle

Phase composition
Zirconium
Plastic deformation
Elastic moduli
Grain refinement
2016
1 Citation (Scopus)

Features of the Ti-40Nb alloy prototype formation by 3D additive method

Sharkeev, Y. P., Kovalevskaya, Z. G., Khimich, M. A., Eroshenko, A. Y., Saprykin, A. A., Ibragimov, E. A. & Glukhov, I. A., 10 Nov 2016, In : AIP Conference Proceedings. 1783, 020206.

Research output: Contribution to journalArticle

prototypes
porosity
melting
metallography
anisotropy

Influence of severe plastic deformation on physicomechanical properties of Ti-40 mas % Nb alloy

Kovalevskaya, Z. G., Khimich, M. A., Belyakov, A. V. & Shulepov, I. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 525-529 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic deformation
Tempering
Elastic moduli
Cold working
Phase composition
1 Citation (Scopus)

Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting

Sharkeev, Y. P., Eroshenko, A. Y., Kovalevskaya, Z. G., Saprykin, A. A., Ibragimov, E. A., Glukhov, I. A., Chimich, M. A., Uvarkin, P. V. & Babakova, E. V., 8 Aug 2016, In : IOP Conference Series: Materials Science and Engineering. 140, 1, 012020.

Research output: Contribution to journalArticle

Phase composition
Melting
Microstructure
Niobium
Lasers
3 Citations (Scopus)

Phase transformations of the Ti-40% Nb alloy under external influence

Sharkeev, Y. P., Kovalevskaya, Z. G., Khimich, M. A., Bataev, V. A., Zhu, Q., Belyakov, A. V. & Gluhov, I. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 683. p. 174-180 7 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase transitions
Plastic deformation
Metallography
Metastable phases
Tempering
1 Citation (Scopus)
Adhesion
Gases
Ultrasonics
Steel
Coatings
10 Citations (Scopus)

Structural and Phase State of Ti–Nb Alloy at Selective Laser Melting of the Composite Powder

Sharkeev, Y. P., Eroshenko, A. Y., Kovalevskaya, Z. G., Saprykin, A. A., Ibragimov, E. A., Glukhov, I. A., Khimich, M. A., Uvarkin, P. V. & Babakova, E. V., 1 Jul 2016, In : Russian Physics Journal. 59, 3, p. 430-434 5 p.

Research output: Contribution to journalArticle

melting
composite materials
niobium
lasers
grain size

Structural and phase transformations in iron-based alloy obtained in conditions of high cooling rate crystallization

Kovalevskaya, Z. G. & Khimich, M. A., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020108

Research output: Chapter in Book/Report/Conference proceedingConference contribution

phase transformations
crystallization
cooling
iron
hardening

Synthesizing conditions and structural-phase state of Ti-Nb alloy when selective laser melting

Saprykin, A. A., Sharkeev, Y. P., Ibragimov, E. A., Babakova, E. V., Kovalevskaya, Z. G., Eroshenko, A. Y., Khimich, M. A., Uvarkin, P. V. & Gluhov, I. A., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Niobium
Melting
Titanium
Phase composition
Lasers
1 Citation (Scopus)

The character of fracture of iron based thermal coating during fretting

Kovalevskaya, Z. G., Kovalevskiy, E. A. & Khimich, M. A., 2 Jun 2016, In : IOP Conference Series: Materials Science and Engineering. 124, 1, 012126.

Research output: Contribution to journalConference article

Iron
Coatings
Wear of materials
Fretting corrosion
Hot Temperature

The investigation of the influence of formation conditions on the structure of Ti-40Nb alloy

Kovalevskaya, Z., Kovalevskaya, Z., Sharkeev, Y. P., Khimich, M., Parilov, E., Glukhov, I. & Komarova, E., 13 Oct 2016, In : AIP Conference Proceedings. 1772

Research output: Contribution to journalArticle

2015
4 Citations (Scopus)

Investigation of high-energy external influences on structural heredity of the Ti-Nb alloy

Khimich, M. A., Parilov, E. A., Kovalevskaya, Z. G. & Sharkeev, Y. P., 13 Oct 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 93. 012042

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical microscopy
Energy dispersive spectroscopy
Plastic deformation
Phase transitions
Heat treatment
2 Citations (Scopus)

Research of surface activating influence on formation of adhesion between gas-thermal coating and steel substrate

Kovalevskaya, Z., Klimenov, V. & Zaitsev, K. V., 14 Sep 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 91. 012057

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Adhesion
Gases
Coatings
Substrates
2014
20 Citations (Scopus)

A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating

Balokhonov, RR., Romanova, V. A., Schmauder, S., Martynov, S. A. & Kovalevskaya, Z. G., 1 Jan 2014, In : Composites Part B: Engineering. 66, p. 276-286 11 p.

Research output: Contribution to journalArticle

Coated materials
Plastic deformation
Coatings
Boride coatings
Steel

Chromium alloyed steel nitriding within close-to-critical temperature range

Kovalevskaya, Z. G., Klimenov, V. A., Goncharenko, I. M., Ivanov, Y. F. & Belousova, N. S., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1013. p. 146-152 7 p. (Advanced Materials Research; vol. 1013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nitriding
Nitrides
Chromium
Carbon steel
Steel
9 Citations (Scopus)

Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy

Kovalevskaya, Z. G., Khimich, M. A., Belyakov, A. V. & Shulepov, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 39-42 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Physical properties
Mechanical properties
Elastic moduli
Niobium alloys
Nanohardness
10 Citations (Scopus)

Interfacial adhesion between thermal spray coating and substrate achieved by ultrasonic finishing

Kovalevskaya, Z. G., Klimenov, V. A. & Zaitsev, K. V., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 459-463 5 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adhesion
Ultrasonics
Thermal spraying
Coatings
Profilometry
2013
10 Citations (Scopus)

Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing

Kovalevskaya, Z. G., Ivanov, Y. F., Perevalova, O. B., Klimenov, V. A. & Uvarkin, P. V., Jan 2013, In : Physics of Metals and Metallography. 114, 1, p. 41-53 13 p.

Research output: Contribution to journalArticle

low carbon steels
Low carbon steel
surface layers
heredity
ultrasonics
2012
2 Citations (Scopus)

Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment

Kovalevskaya, Z. G., Uvarkin, P. V. & Tolmachev, A. I., 1 Mar 2012, In : Russian Journal of Nondestructive Testing. 48, 3, p. 153-158 6 p.

Research output: Contribution to journalArticle

Steel
ultrasonics
Ultrasonics
steels
hardening
2010
6 Citations (Scopus)

Effect of ultrasound treatment of the substrate on the formation of the coating in detonation spraying

Klimenov, V. A., Kovalevskaya, Z. G., Ul'yanitskii, V. Y., Zaitsev, K. V. & Borozna, V. Y., 2010, In : Welding International. 24, 10, p. 803-807 5 p.

Research output: Contribution to journalArticle

2006
2 Citations (Scopus)
nitrogen ions
Steel
surface treatment
Nitrides
Ion implantation
2005
11 Citations (Scopus)

Effect of ultrasonic plastic treatment on the surface structure and phase state of nickel titanium

Lotkov, A. I., Baturin, A. A., Grishkov, V. N., Kovalevskaya, Z. G. & Kuznetsov, P. V., 14 Dec 2005, In : Technical Physics Letters. 31, 11, p. 912-914 3 p.

Research output: Contribution to journalArticle

plastics
titanium
ultrasonics
nickel
hardening
2003
1 Citation (Scopus)

Technology of ultrasonic finishing treatment for locomotive wheel pair type

Klimenov, V. A., Kovalevskaya, Z. G., Uvarkin, P. V., Tolstov, V. P. & Stepanov, I. B., 2003, Proceedings - KORUS 2003: 7th Korea-Russia International Symposium on Science and Technology. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 279-284 6 p. 1222455

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Locomotives
Ultrasonics
Wheels
Technology
Surface Properties
2002
1 Citation (Scopus)

Investigation of the electron beam thermal affecting on the coating-substrate composition

Klimenov, V. A., Kovalevskaya, Z. G., Eroshenko, A. Y. & Gubar'kov, D. V., 2002, In : Svarochnoe Proizvodstvo. 6, p. 20-23 4 p.

Research output: Contribution to journalArticle