• 338 Citations
  • 14 h-Index
20022020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 338 Citations
  • 14 h-Index
  • 34 Conference contribution
  • 11 Article
  • 8 Conference article
  • 6 Editorial
Filter
Conference contribution
Conference contribution

Activation of copper and alumina powders in ball mill

Martyushev, N. V. & Semenkov, IV., 2014, Advanced Materials Research. Vol. 872. p. 137-141 5 p. (Advanced Materials Research; vol. 872).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Alignment of the microstructure of castings from the heterophase lead bronzes

Martyushev, N. V., 2014, Advanced Materials Research. Vol. 880. p. 163-167 5 p. (Advanced Materials Research; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)

An investigation into autobalancing devices with multireservoir system

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012014

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Bronze sealing rings defects and ways of its elimination

Martyushev, N. V. & Pashkov, E. N., 2013, Applied Mechanics and Materials. Vol. 379. p. 82-86 5 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Computer analysis of the material structure

Martyushev, N. V., Egorov, Y. P. & Utiev, M., 2002, Proceedings of the 8th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Technique and Technologies, MTT 2002. Institute of Electrical and Electronics Engineers Inc., p. 159-161 3 p. 1213783

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Copper alloys structure parameters

Martyushev, N. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 225-229 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creation of ceramic nanocomposite material on the basis of ZrO2-Y2O3-Al2O3 with improved operational properties of the working surface

Nekrasova, T. V., Melnikov, A. G. & Martyushev, N. V., 4 Oct 2013, Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises. p. 77-81 5 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

21 Citations (Scopus)

Determination of the signal strength with the computer analysis of the material structure

Martyushev, N. V. & Egorov, Y. P., 2003, Proceedings of the 9th International Scientific and Practical Conference of Students, Post-graduates and Young Scientists - Modern Techniques and Technologies, MTT' 2003. p. 192-194 3 p. 1438190

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Effect of mould heating temperature on cooling rate of the melt upon bronze crystallization

Martyushev, N. V. & Petrenko, YN., 1 Jan 2014, Innovative Technologies and Economics in Engineering. Trans Tech Publications Ltd, p. 231-235 5 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of protective release coatings on the basis of superdispersersed zirconium oxide powder on the formation of gas defects in bronze casting

Martyushev, N. V. & Risto, N. A., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of crystallization conditions on lead tin bronze properties

Martyushev, N. V. & Petrenko, YN., 2014, Advanced Materials Research. Vol. 880. p. 174-178 5 p. (Advanced Materials Research; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

Efficiency of balancing by liquid-type automatic balancing devices

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 858-863 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of gravitational force effect on balancung processes in liquid-type autobalancing devices

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 642-645 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of the resource efficiency of foundry technologies: Methodological aspect

Ardashkin, I. B., Yakovlev, A. N. & Martyushev, N. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 912-916 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

19 Citations (Scopus)

Features of the fine structure of the active layers of organic solar cells

Smirnov, A. I., Plotnikova, N. V., Burov, V. G. & Martyushev, N. V., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 176-181 6 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impact of protective release coatings with nanopowders on the quality of bronze castings surface

Martyushev, N. V., Semenkov, IV. & Petrenko, YN., 2014, Advanced Materials Research. Vol. 872. p. 112-117 6 p. (Advanced Materials Research; vol. 872).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Influence of technological factors on structure and properties of Alumina-Zirconia ceramics

Ivashutenko, A. S., Martyushev, N. V., Vidayev, I. G. & Kostikov, K. S., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 845-849 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Investigation of the properties of alumina-zirconia ceramics

Ivashutenko, A. S., Kabyshev, A. V., Martyushev, N. V. & Vidayev, I. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 245-249 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Lead distribution in centrifugal-cast billets made of quinary tin-base bronze depending on the mould spin rate

Korchmit, A. V., Martyushev, N. V. & Drozdov, Y. Y., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 455-458 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Leaded-tin bronze destruction mechanism

Martyushev, N. V., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357597

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Magnetic pulse compaction of oxide powders of the (ZrO2 – y2O3)–Al2O3 system

Ivashutenko, A. S., Martyushev, N. V. & Vidayev, I. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 819-823 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)

Methodological aspects of evaluation of foundry technologies effectiveness

Ardashkin, I. B., Martyushev, N. V. & Drozdov, Y. Y., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 445-449 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Microstructure and properties of the composite on the basis of copper and diamond

Ivashutenko, A. S., Martyushev, N. V. & Drozdov, Y. Y., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 607-610 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Numerical simulation of temperature field in steel under action of electron beam heating Source

Skeeba, V. Y., Ivancivsky, V. V., Martyushev, N. V., Lobanov, D. V., Vakhrushev, N. V. & Zhigulev, A. K., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 105-111 7 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

19 Citations (Scopus)

Principal indicators for efficiency assessment of resource management in foundry production

Vidayev, I. G., Martyushev, N. V., Sidorenko, T. V. & Ivashutenko, A. S., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 917-920 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Production of powders by the method of electrospark dispersion

Zhuravkov, S. P., Kornev, Y. I., Ivashutenko, A. S. & Martyushev, N. V., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 710-714 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

SLS setup and its working procedure

Ahmetshin, R. G., Fedorov, V. V., Kostikov, K. S., Martyushev, N. V., Ovchinnikov, V. A., Rasin, A. V. & Yakovlev, A. N., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 477-481 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Stationary rotation of the partially liquid-filled unbalanced rotor under external friction force action

Pashkov, E. N., Martyushev, N. V. & Yurovsky, P. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 903-906 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Structure and properties of leaded tin bronze under different crystallization conditions

Martyushev, N. V., Semenkov, IV. & Petrenko, YN., 2014, Advanced Materials Research. Vol. 872. p. 89-93 5 p. (Advanced Materials Research; vol. 872).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

The influence of the pouring temperature on the structure and properties of copper metal alloys

Korchmit, A. V., Martyushev, N. V. & Drozdov, Y. Y., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 450-454 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The possibility of casting surface alloying by nanopowders

Martyushev, N. V. & Semenkov, IV., 20 Feb 2014, Advanced Materials, Synthesis, Development and Application. p. 272-275 4 p. (Advanced Materials Research; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

The resource efficiency assessment technique for the foundry production

Vidayev, I. G., Martyushev, N. V., Ivashutenko, A. S. & Bogdan, A. M., 2014, Advanced Materials Research. Vol. 880. p. 141-145 5 p. (Advanced Materials Research; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Tribotechnical properties lead bronzes

Martyushev, N. V. & Pashkov, E. N., 2013, Applied Mechanics and Materials. Vol. 379. p. 87-90 4 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Vessel ellipticity and eccentricity effect on automatic balancing accuracy

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012011

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)