Tomsk Polytechnic University

  • Lenin Avenue, 30

    634050 Tomsk

    Russian Federation

  • Russian Federation

Research Output 1958 2020

Filter
Chapter
2019
1 Citation (Scopus)

Environmental problems of mining waste disposal sites in Russia

Azarovа, S. V., Usmanova, T. V. & Mezhibor, A. M., 1 Jan 2019, Reviews of Environmental Contamination and Toxicology. Springer New York LLC, p. 59-84 26 p. (Reviews of Environmental Contamination and Toxicology; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapter

Waste Disposal Facilities
Russia
Waste disposal
Minerals
Mineral resources
2018

Active ageing index: A Russian study

Barysheva, G. A., Frolova, E. A., Malanina, V. A. & Taran, E. A., 7 Feb 2018, Building Evidence for Active Ageing Policies: Active Ageing Index and its Potential. Springer Singapore, p. 409-435 27 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Correlation between properties of oxide compounds formed on contact surfaces of cutting tools and cutting tool wear resistance

Nesterenko, V. P., Lasukov, A. A. & Retyunskiy, O. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 141-147 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cutting tools
wear resistance
Oxides
Wear resistance
Acidity

Effect of various heat sources on heating of contact tip during mig/mag welding

Kolmogorov, D. E., Solodsky, S. A., Gil, L. B. & Berg, V. I., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 106-111 6 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

heat sources
welding
Welding
Heating
heating
1 Citation (Scopus)

Electric power engineering on the basis of renewable energy sources

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 89-140 52 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

Fossil fuels
fossil fuel
engineering
Coal gas
Sustainable development

Electric power production

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 49-87 39 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

industry
Industry
electric power

Energy accumulation (store)

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 195-211 17 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

energy
electric power
product

Energy parameters of weld formation process in MIG-MAG welding

Chinakhov, D. A., Solodskii, S. A., Rodionov, P. V. & Sydorets, V. N., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 99-105 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

arc welding
Plasma flow
Electric arc welding
magnetohydrodynamic flow
welding

Energy transmission and distribution

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 141-193 53 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

Power transmission
energy
distribution

Formation and utilization of recyclable wastes at engineering enterprise

Torosyan, V. F., Zeng, X., Torosyan, E. S., Lazareva, A. N. & Tesleva, E. P., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 195-200 6 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

sludge
Zinc
Electroplating
Chromium
Leaching

From the history of electrical power engineering

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 13-21 9 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

electrical power
Electric power systems
engineering
history
electric power

How dynamic properties of inverters influence electrode metal transfer to the weld pool, and change structural and phase composition of joints produced via high alloyed electrodes

Il'Yaschenko, D. P., Chinakhov, D. A., Mamadaliev, R. A., Danilov, V. I. & Saranchin, A. A., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 93-98 6 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

inverters
Phase composition
dynamic characteristics
Welds
Metals
4 Citations (Scopus)

Improvement of research procedures into the highly rigid welded metal using thermal microscopy facilities

Malushin, N. N., Valuev, D. V., Il’Yaschenko, D. P., Gizatulin, R. A. & Nekrasov, R. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 148-152 5 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Microscopic examination
Metals
microscopy
configurations
metals

Investigation of thermal cycle effect on hardening of deposited high-speed metal

Solodsky, S. A., Malchik, A. G. & Valuev, D. V., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 153-160 8 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

hardening
Hardening
Metals
high speed
cycles

Machining of titanium alloys with wave milling cutters

Korovin, G. I., Petrushin, S. I. & Gubaidulina, R. H., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 79-85 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Milling cutters
cutters
titanium alloys
Titanium alloys
machining

Mathematical formula to determine geometrical dimensions of electrode metal droplets transferred with short circuits

Il’yaschenko, D. P., Chinakhov, D. A., Kirichenko, K. Y. & Sydorets, V. N., 1 Jan 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 1-6 6 p. (Materials Science Forum; vol. 938).

Research output: Chapter in Book/Report/Conference proceedingChapter

short circuits
Short circuit currents
Metals
Electrodes
electrodes

Mosses as indicators of urban environmental pollution: Examples of pylaisia polyantha (HEDW.) B.S.G. from West Siberia

Borisenko, A. L., Ryzhakova, N. K. & Rogova, N. S., 15 Nov 2018, Mosses: Ecology, Life Cycle and Significance. Nova Science Publishers, Inc., p. 27-57 31 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Siberia
Bryophyta
Environmental Pollution
moss
mosses and liverworts

Multi-pass laser and hybrid laser-arc narrow-gap welding of steel butt joints

Shelyagin, V., Khaskin, V., Bernatskyi, A., Siora, A., Sydorets, V. & Chinakhov, D. A., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 64-71 8 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

butt joints
Steel
welding
Welding
arcs

Numerical modeling of thermal processes while depositing layers in additive production

Kuznetsov, M. A., Krampit, M. A., Krukov, A. V., Kust, T. S. & Pavlov, N. V., 1 Jan 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 54-61 8 p. (Materials Science Forum; vol. 938).

Research output: Chapter in Book/Report/Conference proceedingChapter

Substrates
products
Quality control
Numerical models
Temperature distribution
1 Citation (Scopus)

Numerical simulation of thermal processes in welding with pulsed electrode wire feeding

Ilyashchenko, D. P., Berg, V. I., Kryukov, A. B. & Saranchin, A. A., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 55-63 9 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Computational methods
welding
Welding
wire
Wire

Overview information systems for calculating processes welding stainless steels

Chernysheva, Y., Zakharova, A. A., Telipenko, E. V. & Molnina, E. V., 1 Jan 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 12-17 6 p. (Materials Science Forum; vol. 938).

Research output: Chapter in Book/Report/Conference proceedingChapter

information systems
Stainless Steel
welding
stainless steels
Welding

Power engineering and the biosphere

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 213-239 27 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

biosphere
engineering
world

Power engineering as a basis for progress of civilization

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 1-11 11 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

Textbooks
textbook
civilization
engineering

Selection of complete recovery of precious metals in the processing of copper-nickel alloys in hydrometallurgical way

Gorlenkov, D. V., Gorlenkova, I. V., Beloglazov, I. I. & Timofeev, V. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 190-194 5 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

copper alloys
nickel alloys
Copper alloys
Nickel alloys
Precious metals
4 Citations (Scopus)

Technological improvement of surfacing of parts of hammer crushers used in coke-chemical industry

Malushin, N. N., Valuev, D. V., Ll’Yaschenko, D. P., Trifonov, V. A. & Nekrasov, R. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 168-175 8 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

crushers
arc welding
Crushers
hammers
Hard facing

The current state of application of ultra- and nanostructured powders in technologies in welding technologies (review)

Kuznetsov, M. A. & Zernin, E. A., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 20-28 9 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

welding
Powders
Welding
arc welding
slags

The development of technology of basalt nanocomposite coatings detonation-gas spaying on the disk («target») basis of thin layer magnetron spaying equipment

Sitnikova, T. A., Zhukov, E. B., Golovina, T. A., Saprykina, N. A. & Tesleva, E. P., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 201-207 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Basalt
Detonation
detonation
basalt
Microhardness

The Earth’s energy resources (reserves, short characteristics)

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 23-48 26 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

Energy resources
energy resource
Earth (planet)
resource
need

The effect of magnetic field on crystallization and some properties of silver azide crystals

Rodzevich, A. P., Kuzmina, L. V., Gazenaur, E. G., Sugatov, E. V. & Krasheninin, V. I., 1 Jan 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 18-26 9 p. (Materials Science Forum; vol. 938).

Research output: Chapter in Book/Report/Conference proceedingChapter

Defect structures
Crystallization
Crystal growth
Chemical properties
Silver
2 Citations (Scopus)

Towards smart education and lifelong learning in Russia

Krivova, L., Imas, O., Moldovanova, E., Mitchell, P. J., Sulaymanova, V. & Zolnikov, K. P., 2018, Smart Innovation, Systems and Technologies. Springer Science and Business Media Deutschland GmbH, Vol. 70. p. 357-383 27 p. (Smart Innovation, Systems and Technologies; vol. 70).

Research output: Chapter in Book/Report/Conference proceedingChapter

Education
Students
Teaching
Life long learning
Russia

Unconventional (alternative) methods of electric energy production

Ushakov, V. Y., 2018, Green Energy and Technology. 9783319623009 ed. Springer Verlag, p. 241-256 16 p. (Green Energy and Technology; no. 9783319623009).

Research output: Chapter in Book/Report/Conference proceedingChapter

power generation
Power generation
method
energy production
2017

Comparative analysis of hygiene and sanitary characteristics of consumable electrode gas-shielded welding

Pavlov, N. V., Kryukov, A. V., Il’yaschenko, D. P. & Chinakhov, D. A., 1 Jan 2017, Materials Science Forum. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 906).

Research output: Chapter in Book/Report/Conference proceedingChapter

gas welding
hygiene
Gas welding
welding
Welding
1 Citation (Scopus)

Developing of KUKA youBot software for education process

Mikhalevich, S., Krinitsyn, N., Manenti, F., Kurochkin, V. & Baydali, S., 2017, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 57. p. 1573-1578 6 p. (Chemical Engineering Transactions; vol. 57).

Research output: Chapter in Book/Report/Conference proceedingChapter

Education
Students
Manipulators
Mobile devices
Industry

Electron-beam welding -structural-phase state and microhardnes in the weld zone in a submicrocrystalline titanium alloy grade2

Klimenov, V. A., Klopotov, A. A., Abzaev, Y. A., Kurgan, K. A. & Vlasov, Y. A., 1 Jan 2017, Materials Science Forum. Trans Tech Publications Ltd, p. 32-37 6 p. (Materials Science Forum; vol. 906).

Research output: Chapter in Book/Report/Conference proceedingChapter

electron beam welding
Electron beam welding
titanium alloys
Titanium alloys
Welds
2 Citations (Scopus)

Influence of gas dynamic processes on chemical composition of hardfaced layer when restoring machine parts manufactured from 40H steel

Chinakhov, D. A., Solodsky, S. A., Grigorieva, E. G. & Mayorova, E. I., 1 Jan 2017, Materials Science Forum. Trans Tech Publications Ltd, p. 142-146 5 p. (Materials Science Forum; vol. 906).

Research output: Chapter in Book/Report/Conference proceedingChapter

Machine components
Gas dynamics
Steel
gas dynamics
Shielding
2016
4 Citations (Scopus)

Bioceramic coatings for metallic implants

Vladescu, A., Surmeneva, M. A., Cotrut, C. M., Surmenev, R. A. & Antoniac, I. V., 1 Jan 2016, Handbook of Bioceramics and Biocomposites. Springer International Publishing, p. 703-733 31 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Bioceramics
Orthopedics
Bone
Biocompatible Materials
Bone and Bones
4 Citations (Scopus)

Nanometals: Synthesis and Application in Energetic Systems

Gromov, A. A., Korotkikh, A. G., Il'in, A., DeLuca, L. T., Arkhipov, V. A., Monogarov, K. A. & Teipel, U., 1 Jan 2016, Energetic Nanomaterials: Synthesis, Characterization, and Application. Elsevier Inc., p. 47-63 17 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Ignition systems
Solid propellants
Ice
Propellants
Powders

Production of electrodes for manual arc welding with using the complex modifiers

Il'yashenko, D. & Makarov, S., 8 Dec 2016, Applied Nanotechnology: Materials and Applications. Apple Academic Press, p. 207-211 5 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

arc welding
Electric arc welding
admixtures
Welds
Deoxidants
2015
4 Citations (Scopus)

A comparison of simulation techniques for uranium crystallization process

Ochoa Bique, A. O., Goryunov, A. G. & Manenti, F., 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 43. p. 793-798 6 p. (Chemical Engineering Transactions; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingChapter

Uranium
Crystallization
Cellular automata
Crystallizers
Mathematical models
22 Citations (Scopus)

Advanced hard coatings with enhanced toughness and resistance to cracking

Musil, J., 1 Jan 2015, Thin Films and Coatings: Toughening and Toughness Characterization. CRC Press/Balkema, p. 377-463 87 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Hard coatings
Toughness
Nanocomposites
Grain boundaries
Coatings

Definition of thermochemical characteristics for dispersed condensed substance ignition in the conditions of local energy supply

Glushkov, D. O., Zakharevich, A. V. & Strizhak, P. A., 1 Jan 2015, Multifunctional Materials and Modeling. Apple Academic Press, p. 29-40 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Ignition
Composite propellants
Liquid fuels
Energy efficiency
Power plants
1 Citation (Scopus)

Design, development and implementation of a master of science program for chemical and nuclear engineering: Integration of CAPE (modelling, simulation and control) skills

Goryunov, A. G., Dyadik, V. F., Liventsov, S. N., Kozin, K. A., Manenti, F. & Pierucci, S., 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 43. p. 1507-1512 6 p. (Chemical Engineering Transactions; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingChapter

Nuclear engineering
Computer aided engineering
Process engineering
Chemical engineering
Radioactive Elements

Development of an advanced control system for a chemical vapor deposition (CVD) reactor for polysilicon production

Kozin, K. A., Goryunov, A. G., Manenti, F., Rossi, F. & Stolpovskiy, A. E., 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 43. p. 1531-1536 6 p. (Chemical Engineering Transactions; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingChapter

Polysilicon
Chemical vapor deposition
Control systems
Pyrometers
Adaptive control systems
4 Citations (Scopus)

Operational optimization of reverse osmosis plant using MPC

Manenti, F., Nadezhdin, I. S., Goryunov, A. G., Kozin, K. A., Baydali, S. A., Papasidero, D., Rossi, F. & Potemin, R. V., 1 Oct 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 45. p. 247-252 6 p. (Chemical Engineering Transactions; vol. 45).

Research output: Chapter in Book/Report/Conference proceedingChapter

Osmosis membranes
Reverse osmosis
Model predictive control
Recycling
Impurities
1 Citation (Scopus)

Optimization of a water purification system in real time

Nadezhdin, I. S., Goryunov, A. G., Manenti, F., Rossi, F., Kozin, K. A. & Baydali, S. A., 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 43. p. 1489-1494 6 p. (Chemical Engineering Transactions; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingChapter

Reverse osmosis
Purification
Water
Mathematical models
Osmosis membranes
4 Citations (Scopus)

Robust PI/PID controller design for the reliable control of plug flow reactor

Mikhalevich, S. S., Rossi, F., Manenti, F. & Baydali, S. A., 2015, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 43. p. 1525-1530 6 p. (Chemical Engineering Transactions; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingChapter

Robustness (control systems)
Flow of solids
Controllers
System stability
Tuning
2 Citations (Scopus)

X-ray analysis of the structure-phase states of the tantalum coating on NiTi substrate treated by electron beams

Ostapenko, M. G., Meisner, L. L., Zakharova, M. A. & Gudimova, E. Y., 1 Jan 2015, Materials Today: Proceedings. Elsevier Ltd, Vol. 2. p. S901-S904

Research output: Chapter in Book/Report/Conference proceedingChapter

Tantalum
X ray analysis
Phase structure
Electron beams
Coatings
2014

Antioxidant activity of mint

Sazhina, N. N., Misin, V. M. & Korotkova, E. I., 1 Jan 2014, Food Composition and Analysis: Methods and Strategies. Apple Academic Press, p. 337-346 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Mints
Mentha
mint
Antioxidants
antioxidant activity

Breakdown of gas gaps in a nonuniform electric field at a short voltage pulse rise time

Baksht, E. K., Boichenko, A. M., Erofeev, M. V., Tarasenko, V. F. & Tkachev, A. N., 1 Oct 2014, Runaway Electrons Preionized Diffuse Discharges. Nova Science Publishers, Inc., p. 354-371 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Electric fields
Electric breakdown
Electron beams
Electric potential
Gases
6 Citations (Scopus)

Carbon fluxes across boundaries in the pacific arctic region in a changing environment

Cai, W. J., Bates, N. R., Guo, L., Anderson, L. G., Mathis, J. T., Wanninkhof, R., Hansell, D. A., Chen, L. & Semiletov, I. P., 1 Jan 2014, The Pacific Arctic Region: Ecosystem Status and Trends in a Rapidly Changing Environment. Springer Netherlands, p. 199-222 24 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

dissolved inorganic carbon
carbon flux
archipelago
organic carbon
ice retreat