Research Output

Filter
Conference contribution
Conference contribution

Influence of crystallographic symmetry on the self-organization of plastic deformation in [111] nickel single crystals

Alfyorova, E. A., Filippov, A. V. & Lychagin, D. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020008

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel

Ovcharenko, V. E., Psakhie, S. G., Lapshin, O. V. & Savitskii, A. P., 2005, Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Vol. 3. p. 267-272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of filling agent quantity on characteristics of polymeric composites

Vitske, R. E., Kondratyuk, A. A. & Nesterenko, V. P., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 548-552 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of hardened layer structure and coating-substrate interface geometry on plastic deformation pattern of structural steels at mesolevel

Koval, A. & Panin, S., 2000, Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Institute of Electrical and Electronics Engineers Inc., Vol. 3. p. 375-380 6 p. 866117

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Influence of high-intensity Zr ion-beam treatment on deformation and fracture of 12Cr1MoV steel under static, cyclic and dynamic loadings

Vlasov, I., Panin, S., Sergeev, V., Naidfeld, V., Maruschak, P. & Ovechkin, B., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 49-54 6 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of implantation on the grain size and structural-phase state of UFG-titanium

Nikonenko, A., Popova, N., Nikonenko, E., Kalashnikov, M. & Kurzina, I., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020243. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of in-service degradation on strain localization in steel of main gas pipelines

Maruschak, P., Bishchak, R., Panin, S., Pylypenko, A., Menou, A. & Danyliuk, I., 2014, AIP Conference Proceedings. American Institute of Physics Inc., Vol. 1623. p. 399-402 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of ion-beam treatment on structure and deformation resistance of 12Cr1MoV steel under static, cyclic and dynamic loading

Panin, S. V., Vlasov, I. V., Maruschak, P. O. & Sergeev, V. P., 13 Oct 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 93. 012027

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of laser radiation on structure and properties of steel

Lobankova, O. V., Zykov, I. Y., Melnikov, A. G. & Turanov, S. B., 2016, Advanced Materials, Structures and Mechanical Engineering - Proceedings of the International Conference on Advanced Materials, Structures and Mechanical Engineering. CRC Press/Balkema, p. 75-78 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene

Panin, S. V., Kornienko, L. A., Buslovich, D. G., Alexenko, V. O. & Ivanova, L. R., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030017

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of loading short carbon fibers (CF) on tribotechnical properties of UHMWPE composites at various testing conditions

Panin, S. V., Alexenko, V. O., Kornienko, L. A. & Buslovich, D. G., 23 Aug 2018, Oil and Gas Engineering, OGE 2018. Myshlyavtsev, A. V., Likholobov, V. A. & Yusha, V. L. (eds.). American Institute of Physics Inc., Vol. 2007. 040014

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of nano- and microfillers on the mechanical and tribotechnical properties of "UHMWPE-PTFE" composites

Panin, S. V., Kornienko, L. A., Alexenko, V. O., Ivanova, L. R. & Shilko, S. V., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 161-165 5 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Influence of nanostructuring superficial layer and subsequent chemical-thermal treatment for wear resistance of titanium alloy BT-6

Kolgachev, A. E., Panin, V. E., Panin, S. V. & Pochivalov, J. I., 2005, 11th International Scientific and Practical Conference of Students, Postgraduates and Young Scientists; "Modem Techniques and Technologies", MTT 2005 - Proceedings. p. 127-129 3 p. 4493221

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of notch shape on deformation mechanisms and energy parameters of fracture of 12Cr1MoV steel under impact loading

Panin, S. V., Vlasov, I. V., Maruschak, P. O., Moiseenko, D. D., Berto, F., Vinogradov, A. & Bischak, R. T., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020183

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of pore structure on mechanical properties of ceramic materials. 3D simulation using movable cellular automata

Smolin, A., Roman, N. & Psakhie, S., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of porosity on the deformation behaviour of systems with nanostructured thermal barier coatings

Moiseenko, D. D., Maksimov, P. V., Panin, V. E., Sergeev, V. P., Panin, S. V. & Berto, F., 2014, AIP Conference Proceedings. American Institute of Physics Inc., Vol. 1623. p. 423-426 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of porosity percolation on mechanical properties of ceramic materials. 3D simulation using movable cellular automata

Smolin, A. Y., Roman, N. V., Loginova, D. S., Konovalenko, I. S. & Psakhie, S. G., 2011, Particle-Based Methods II - Fundamentals and Applications. p. 249-255 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of severe plastic deformation on physicomechanical properties of Ti-40 mas % Nb alloy

Kovalevskaya, Z. G., Khimich, M. A., Belyakov, A. V. & Shulepov, I. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 525-529 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of strain localization on deformation mechanisms and fracture of 12Cr1MoV steel with various notch shape under impact loading

Panin, S. V., Vlasov, I. V., Maruschak, P. O., Moiseenko, D. D., Berto, F., Vinogradov, A., Bischak, R. T. & Maksimov, P. V., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020182

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of stress macroconcentrators on the strain localization in Al6061/Al2O3 composites

Deryugin, Y. Y., Panin, V. E., Suvorov, V. I., Lasko, G. V. & Schmauder, S., 2008, TMS Annual Meeting. p. 41-47 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of technological factors on structure and properties of Alumina-Zirconia ceramics

Ivashutenko, A. S., Martyushev, N. V., Vidayev, I. G. & Kostikov, K. S., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 845-849 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Influence of ultrasonic superficial processing on properties of titanic alloys

Klimenov, V., Borozna, V. & Zaitsev, K., 1 Jan 2009, METAL 2009 - 18th International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 273-278 6 p. (METAL 2009 - 18th International Conference on Metallurgy and Materials, Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Influence of vibrational treatment on thermomechanical response of material under conditions identical to friction stir welding

Konovalenko, I. S., Konovalenko, I. S., Dmitriev, A. I., Psakhie, S. G. & Kolubaev, E. A., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel

Panin, V. E., Slosman, A. I., Antipina, N. A., Ovechkin, B. B. & Litvinenko, A. V., 2001, 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 274-277 4 p. 975122

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence research of ultrasonic processing on nature of plastic deformation on mesoscale level steel samples ST30

Korobkina, N. N. & Panin, S. V., 2000, Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc., p. 148-150 3 p. 896092

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Initation of FTDO/DNAP crystallized mixes by Nd: YAG laser

Zarko, V. E., Kalmykov, P. I. & Tsipilev, V. P., 2012, 52nd Israel Annual Conference on Aerospace Sciences 2012. Vol. 1. p. 395-399 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interaction between aluminium nanopowders and non-organic substances

Amelkovich, Y. A. & Godymchuk, A. Y., 2005, 11th International Scientific and Practical Conference of Students, Postgraduates and Young Scientists; "Modem Techniques and Technologies", MTT 2005 - Proceedings. p. 108-109 2 p. 4493210

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interfacial adhesion between thermal spray coating and substrate achieved by ultrasonic finishing

Kovalevskaya, Z. G., Klimenov, V. A. & Zaitsev, K. V., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 459-463 5 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Investigation of acoustic parameters for structural health monitoring of sandwich panel under cyclic load

Eremin, A. V., Burkov, M. V., Byakov, A. V., Lyubutin, P. S., Panin, S. V. & Khizhnyak, S. A., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 319-323 5 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of active optical systems for remote object visualization

Trigub, M. V., Fedorov, K. V. & Evtushenko, G. S., 10 Aug 2015, International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices, EDM. IEEE Computer Society, Vol. 2015-August. p. 321-324 4 p. 7184554

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Investigation of behaviour of surface hardened steels with different interface profiles under tension

Koval, A. V. & Panin, S. V., 2001, Proceedings of the 7th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2001. Institute of Electrical and Electronics Engineers Inc., p. 75-77 3 p. 983740

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of cracking pattern of brittle hardening layers under tension of coated specimens

Koval, A. V. & Panin, S. V., 2001, Proceedings of the 7th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2001. Institute of Electrical and Electronics Engineers Inc., p. 79-81 3 p. 983742

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of defect nucleation in titanium under mechanical loading

Zolnikov, K. P., Korchuganov, A. V., Kryzhevich, D. S. & Psakhie, S. G., 2014, AIP Conference Proceedings. American Institute of Physics Inc., Vol. 1623. p. 675-678 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of deformation and fracture of composition with sprayed coatings under threepoint bending

Panin, S. V., Korobkina, N. N., Kudryashova, M. P. & Belotserkovskii, M. A., 2003, Proceedings - KORUS 2003: 7th Korea-Russia International Symposium on Science and Technology. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 164-169 6 p. 1222427

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of dilatancy in block-structured geological medium on the base of movable cellular automaton method

Astafurov, S. V., Shilko, E. V., Andreev, A. V. & Psakhie, S. G., 2011, Particle-Based Methods II - Fundamentals and Applications. p. 584-595 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of high-energy external influences on structural heredity of the Ti-Nb alloy

Khimich, M. A., Parilov, E. A., Kovalevskaya, Z. G. & Sharkeev, Y. P., 13 Oct 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 93. 012042

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Investigation of influence of adhesive strength on plastic flow at mesolevel in low-carbon specimens with gas-dynamic coatings

Panin, S. V., Alkhimov, A. P., Klimenov, V. A., Korobina, N. N. & Nekhoroshkov, O. N., 2000, Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Institute of Electrical and Electronics Engineers Inc., Vol. 3. p. 229-234 6 p. 866090

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of influence of friction stir welding regimes on the features of mass transfer and temperature distribution in forming welds

Astafurov, S. V., Shilko, E. V., Kolubaev, E. A. & Psakhie, S. G., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Investigation of lamb wave based ultrasonic technique for AA2024 evaluation at static tensile loading

Byakov, A. V., Eremin, A. V., Burkov, M. V., Shah, R. T., Lyubutin, P. S. & Panin, S. V., 1 Jan 2016, High Technology: Research and Applications, 2015. Trans Tech Publications Ltd, p. 394-398 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of peculiarities fracture and dilatancy processes during constrained shear deformation of block-structured geological media

Astafurov, S. V., Shilko, E. V. & Psakhie, S. G., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of percolation properties of heat and sound insulating composites having cellular texture on the base of aluminosilicate microspheres and kaolin clay

Afonin, A. G., Kondratyuk, A. A. & Akulov, A. P., 2002, Proceedings of the 8th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Technique and Technologies, MTT 2002. Institute of Electrical and Electronics Engineers Inc., p. 128-130 3 p. 1213767

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of plastic deformation development at mesoscale level in composition with cold-sprayed coatings

Korobkina, N. N., Panin, S. V. & Alkhimov, A. P., 2001, Proceedings of the 7th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2001. Institute of Electrical and Electronics Engineers Inc., p. 71-73 3 p. 983738

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of Pm-75 carbon black addition on the properties of protective polymer coatings

Sapronov, O., Maruschak, P., Buketova, N., Leschenko, O. & Panin, S., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020194

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Investigation of regularities of formation and propagation of elastic vortices in surface layers of materials under dynamic contact loading

Astafurov, S. V., Shilko, E. V. & Psakhie, S. G., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020008

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of sensitivity of aluminum foil based strain sensors at fatigue damage evaluation of CFRP

Burkov, M. V., Panin, S. V., Lyubutin, P. S. & Eremin, A. V., 1 Jan 2014, High Technology: Research and Applications. Trans Tech Publications Ltd, p. 943-948 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Investigation of 'smart sensor's' behavior during cyclic test of carbon fiber reinforce polymer

Burkov, M. V., Panin, S. V., Lyubutin, P. S. & Eremin, A. V., 15 Dec 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986944

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of the hemostatic action of low-dimensional electropositive structures

Lerner, M. I., Glazkova, E. A., Psakhie, S. G., Tikhonov, V. I. & Tyutrin, I. I., 2014, AIP Conference Proceedings. American Institute of Physics Inc., Vol. 1623. p. 339-342 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Investigation of the mechanism of electron current suppression in an ion diode with magnetic self-insulation

Pushkarev, A., Isakova, Y. & Guselnikov, V., 2011, Digest of Technical Papers-IEEE International Pulsed Power Conference. p. 881-887 7 p. 6191532

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of the microstructure and mechanical properties of Si-Al-N transparent coatings

Bozhko, I. A., Rybalko, E. V., Fedorishcheva, M. V., Vorobiev, Y. A., Magzhanov, R. M., Chernyavsky, A. G. & Sergeev, V. P., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 683. p. 262-268 7 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of the properties of alumina-zirconia ceramics

Ivashutenko, A. S., Kabyshev, A. V., Martyushev, N. V. & Vidayev, I. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 245-249 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)