Research Output

Filter
Conference contribution
Conference contribution

Effect of high-intensity Zr ion beam irradiation on the impact strength of the heat-resistant 12Cr1MoV steel

Panin, S. V., Vlasov, I. V., Maruschak, P. O. & Sergeev, V. P., 18 Nov 2016, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2016: Proceedings of the 10th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1785. 040044

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of hot densification on tribotechnical properties of sintered (Al-12Si)-40Sn alloy

Rusin, N. M., Skorentsev, A. L. & Kolubaev, E. A., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020182

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of ion-beam treatment on structure and fracture resistance of 12Cr1MoV steel under static, cyclic and dynamic loading

Panin, S. V., Vlasov, I. V., Maruschak, P. O. & Sergeev, V. P., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020175

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of magnetron deposition conditions on the structure, phase composition and properties of the coatings on the basis of the Al-Si-N system

Bozhko, I. A., Rybalko, E. V., Fedorischeva, M. V. & Sergeev, V. P., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020020

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of mould heating temperature on cooling rate of the melt upon bronze crystallization

Martyushev, N. V. & Petrenko, YN., 1 Jan 2014, Innovative Technologies and Economics in Engineering. Trans Tech Publications Ltd, p. 231-235 5 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of nanosecond HPM pulses on individual development of Drosophilas: Estimation of comparative contribution by microwave and X-ray components

Bol'shakov, M. A., Eltchaninov, A. A., Klimov, A. I., Knyazeva, I. R., Korovin, S. D., Pegel, I. V., Rostov, V. V. & Voskresensky, V. V., 2001, 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Institute of Electrical and Electronics Engineers Inc., Vol. 2. p. 74-76 3 p. 975182

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of nanosecond HPM pulses on individual development of Drosophilas: Estimation of comparative contribution by microwave and X-ray components

Bol'shakov, M. A., Eltchaninov, A. A., Klimov, A. I., Knyazeva, I. R., Korovin, S. D., Pegel, I. V., Rostov, V. V. & Voskresensky, V. V., 2001, Proceedings of the 7th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2001. Institute of Electrical and Electronics Engineers Inc., p. 151-154 4 p. 983780

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of notch shape on strain localization in steel under shock loading: Hybrid CA simulation

Moiseenko, D., Maksimov, P., Panin, S. & Panin, V., 18 Nov 2016, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2016: Proceedings of the 10th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1785. 040040

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of protective release coatings on the basis of superdispersersed zirconium oxide powder on the formation of gas defects in bronze casting

Martyushev, N. V. & Risto, N. A., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of pulsed electron beam irradiation on microstructure of TiC/Ti6Al4V composites fabricated by laser metal deposition

Sinyakova, E. A., Panin, S. V. & Teresov, A. D., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020335. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of structure and phase composition on thermocyclic stability of thermo-barrier coatings Zr-O deposited by microplasma method on a copper substrate

Dorofeeva, T. I., Gubaidulina, T. A., Gritsenko, B. P. & Sergeev, V. P., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020067

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of the shape and size of carbon nanopores on kinetic properties of molecular hydrogen

Korchuganov, A. V., Zolnikov, K. P., Kryzhevich, D. S. & Psakhie, S. G., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020096

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of type and size of KH550 modified filler on mechanical and tribotechnical properties of UHMWPE composites

Panin, S. V., Qitao, H., Kornienko, L. A., Buslovich, D. G. & Alexenko, V. O., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020268. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of ultrasonic impact treatment on mechanical properties of 3D-printed Ti-6Al-4V titanium alloy parts

Panin, S. V., Pochivalov, Y. I., Perevalova, O. B., Sinyakova, E. A., Kazachenok, M. S., Evtushenko, O. V., Buslovich, D. G. & Buyluk, A. O., 28 Aug 2019, Oil and Gas Engineering, OGE 2019. Myshlyavtsev, A. V., Likholobov, V. A. & Yusha, V. L. (eds.). American Institute of Physics Inc., 040012. (AIP Conference Proceedings; vol. 2141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Effect of ultrasonic treatment on mechanical behaviour of ferrite-martensite steel

Panin, V. E., Panin, A. V., Pochivalov, Y. I., Antipina, N. A., Klimenov, V. A., Ovechkin, B. B., Slosman, A. I., Son, A. A., Mel'nikova, E. A. & Leont'eva-Smirnova, M. V., 27 Dec 2005, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 3. p. 172-175 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of basalt fibers and particles in providing tribotechnical properties of UHMWPE composites under varying wear test conditions

Panin, S. V., Alexenko, V. O., Kornienko, L. A., Buslovich, D. G. & Ivanova, L. R., 23 Aug 2018, Oil and Gas Engineering, OGE 2018. Myshlyavtsev, A. V., Likholobov, V. A. & Yusha, V. L. (eds.). American Institute of Physics Inc., Vol. 2007. 040013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of crystallization conditions on lead tin bronze properties

Martyushev, N. V. & Petrenko, YN., 2014, Advanced Materials Research. Vol. 880. p. 174-178 5 p. (Advanced Materials Research; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

Effects of doped oxygen on ZnWO4 crystal luminescence

Lisitsyn, V. M., Karipbayev, Z. T., Lisitsyna, L. A., Dauletbekova, A. K., Tupitsyna, I. A., Akilbekov, A. T. & Zdorovets, M. V., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 345-350 6 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Efficiency of balancing by liquid-type automatic balancing devices

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 858-863 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Efficiency of glass fibers functionalization with different silane-containing modifiers for improving mechanical and tribotechnical properties of ultra-high-molecular weight polyethylene composites

Panin, S. V., Qitao, H., Kornienko, L. A., Alexenko, V. O. & Buslovich, D. G., 28 Aug 2019, Oil and Gas Engineering, OGE 2019. Myshlyavtsev, A. V., Likholobov, V. A. & Yusha, V. L. (eds.). American Institute of Physics Inc., 040006. (AIP Conference Proceedings; vol. 2141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elastic vortex displacements as precursors of mechanical stress relaxation in heterogeneous materials

Smolin, A. Y., Eremina, G. M., Shilko, E. V. & Psakhie, S. G., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020213

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Electron beam coatings with SHS composite powders "TiC - Cast iron binder" synthesized in air

Korosteleva, E. N., Pribytkov, G. A., Kalambaeva, S. S., Korzhova, V. V. & Durakov, V. G., 2016, High Technology: Research and Applications, 2015. Trans Tech Publications Ltd, Vol. 685. p. 695-699 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Electron-ion-plasma doping of aluminum surface with copper and titanium - A comparative analysis of the formed structure and properties

Ivanov, Y., Klopotov, A., Potekaev, A., Krysina, O., Moskvin, P., Petrikova, E., Ivanova, O., Tsvetkov, N. & Tolkachev, O., 1 Jan 2018, Radiation-Thermal Effects and Processes in Inorganic Materials. Gyngazov, S. (ed.). Trans Tech Publications Ltd, p. 76-81 6 p. (Key Engineering Materials; vol. 781 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrostatic potential at the external boundary of an electron beam in MITL

Belomyttsev, S. V., Kirikov, A. V. & Ryzhov, V. V., 2004, 15th International Conference on High-Power Particle Beams - Proceedings, BEAMS-2004. p. 123-126 4 p. 6220501

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy level transitions of gas in a 2D nanopore

Grinyaev, Y. V., Chertova, N. V. & Psakhie, S. G., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020063

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering calculation of fracture toughness of materials with chevron-notched specimens

Deryugin, Y., Panin, V., Suvorov, B., Kibitkin, V. & Antipina, N., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020039

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Enhanced electrical and mechanical properties of CFRP modified by SWCNT

Burkov, M. & Eremin, A., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020042

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Enhancement of mechanical and tribotechnical properties of polymer composites with thermoplastic UHMWPE and PEEK matrices by loading carbon nanofibers/nanotubes

Panin, S. V., Kornienko, L. A., Anh, N. D., Alexenko, V. O. & Ivanova, L. R., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030015

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Enhancement of the Wear Resistance of Tungsten Cobalt Carbide Plates Using Ion Implantation and Al–Si–N Coatings

Gritsenko, B. P., Rechenko, D. S., Rogachev, E. A., Smyrnova, K. V., Bagdasaryan, A. A., Sergeev, V. P., Popov, A. Y., Nogaibekova, G. Z., Fedorischeva, M. V. & Pogrebnjak, A. D., 1 Jan 2020, Microstructure and Properties of Micro- and Nanoscale Materials, Films, and Coatings - Selected Articles from the International Conference on Nanomaterials: Applications and Properties, NAP 2019. Pogrebnjak, A. D. & Bondar, O. (eds.). Springer Healthcare, p. 279-286 8 p. (Springer Proceedings in Physics; vol. 240).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Estimation of accuracy and interference stabilityof the method of constructing fields of displacement vectors

Lyubutin, P. S. & Panin, S. V., 2005, 11th International Scientific and Practical Conference of Students, Postgraduates and Young Scientists; "Modem Techniques and Technologies", MTT 2005 - Proceedings. p. 157-158 2 p. 4493236

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Estimation of band mill traction performances

Kondratyuk, A. A., Shilko, V. K. & Rudnev, V. D., 2005, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 3. p. 24-27 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Estimation of the effective YAG phosphor thickness for white LEDs

Vaganov, V. A. & Lisitsyn, V. M., 29 Jan 2019, XVI International Conference on Luminescence and Laser Physics Devoted to the 100th Anniversary of Irkutsk State University. Stepanov, F. A., Martynovich, E. F. & Grigorichev, K. V. (eds.). American Institute of Physics Inc., Vol. 2069. 040001

Research output: Chapter in Book/Report/Conference proceedingConference contribution

EUR-ACE® standards and master curriculum design: TPU example

Korosteleva, E. N., Kriushova, A. A., Kuznetsova, E. S., Chuchalin, A. I. & Boev, O. V., 2009, SEFI 37th Annual Conference 2009. European Society for Engineering Education (SEFI)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Evaluation of gravitational force effect on balancung processes in liquid-type autobalancing devices

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 642-645 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of physical and mechanical properties of structural components of Ti-Nb alloy

Kovalevskaya, Z. G., Khimich, M. A., Belyakov, A. V. & Shulepov, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 39-42 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Evaluation of the effect of LED-lamp spectral content on the development of greenhouse tomato

Yakovlev, A. N., Turanov, S. B., Upadysheva, I. N. & Korepanov, V. I., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 482-486 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of the parameters of interface zone formation model

Anisimova, M. & Knyazeva, A., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of the resource efficiency of foundry technologies: Methodological aspect

Ardashkin, I. B., Yakovlev, A. N. & Martyushev, N. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 912-916 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

19 Citations (Scopus)

Evolution of spatial and energy characteristics conically divergent beams in the XeF(D-A) amplifier

Yastremskii, A. G., Ivanov, N. G., Losev, V. F. & Panchenko, Y. N., 2015, International Conference on Atomic and Molecular Pulsed Lasers XII. SPIE, Vol. 9810. 98100O

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of the grain structure in the layer of Zr-Y-O in multilayer coating on the basis of Zr-Y-O/Si-Al-N at a high temperature in the "in-situ" observation

Fedorischeva, M. V., Kalashnikov, M. P., Bozhko, I. A. & Sergeev, V. P., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020081

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental application of Lamb wave technique for testing of CRFP

Burkov, M., Lyubutin, P. & Byakov, A., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020043

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation of dd reaction in range of ultralow energies using Z-pinch

Bystritsky, V. M., Grenbenyuk, V. M., Parzhitski, S. S., Pen'kov, F. M., Sidorov, V. T., Stolupin, V. A., Bulgakov, T. L., Mesyats, G. A., Sinebryukhov, V. A., Chaikovsky, S. A., Luchinsky, A. V., Makhrin, V. I., Ratakhin, N. A., Sorokin, S. A., Bystritskii, V. M., Filipowicz, M., Wozniak, J. & Sinebryukhov, A. A., 1 Jan 2001, 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 386-389 4 p. 975160

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental study and multilevel modeling of effective properties of polyphenylene sulfide based 3-component composites

Grishaeva, N. Y., Panin, S. V., Bochkareva, S. A., Lyukshin, B. A., Panov, I. L., Mukhortin, E. I., Hiep, L. M. T. & Aleksenko, V. O., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020122. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Experimental-theoretical design of multicomponent UHMWPE composites with prescribed mechanical and tribotechnical properties

Panin, S. V., Grishaeva, Y. N., Lyukshin, P. A., Lyukshin, B. A., Panov, I. L., Bochkareva, S. A., Matolygina, Y. N., Aleksenko, V. O. & Buslovich, D. G., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 030051

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental-theoretical technique for design antifriction polyetheretherketone composites of optimum composition

Bochkareva, S. A., Grishaeva, N. Y., Lyukshin, B. A., Panin, S. V., Matolygina, N. Y., Panov, I. L., Nguyen, D. A. & Byakov, A. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020034

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene

Panin, S. V., Kornienko, L. A., Alexenko, V. O., Buslovich, D. G. & Dontsov, Y. V., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 020005

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Fabrication of «TiC-HSS steel binder» composite powders by self-propagating high temperature synthesis

Korosteleva, E. N., Pribytkov, G. A., Krinitcyn, M. G., Baranovskii, A. V., Korzhova, V. V. & Strelnitskij, V. E., 2016, Advanced Materials for Technical and Medical Purpose. Trans Tech Publications Ltd, Vol. 712. p. 195-199 5 p. (Key Engineering Materials; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Fatigue crack growth of SLM Ti-4Al-6V processed by ultrasonic impact treatment

Eremin, A. V., Burkov, M. V., Panin, S. V. & Byakov, A. V., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020082. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue failure as process of sequential development of plastic deformation and continuity disturbance in hierarchy of structural levels

Bydzan, A. & Panin, S., 2000, Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Institute of Electrical and Electronics Engineers Inc., Vol. 3. p. 337-341 5 p. 866110

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue failure stages of VT1-0 titanium in different structural states. Study by acoustic emission method

Bashkov, O. V., Sharkeev, Y. P., Panin, S. V., Kim, V. A., Bashkova, T. I., Popkova, A. A., Eroshenko, A. Y. & Tolmachev, A. I., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. American Institute of Physics Inc., Vol. 1783. 020013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)