Research Output

2020

Assessment of negative influence of manganese in welding fumes on welder's health and ways to reduce it

Il'yaschenko, D. P., Chinakhov, D. A., Chinakhova, E. D., Kirichenko, K. Y. & Verkhoturova, E. V., 1 Jan 2020, In : FME Transactions. 48, 1, p. 75-81 7 p.

Research output: Contribution to journalArticle

Effect of protective coatings in welded constructions on welding stability and electrode metal transfer into a weld pool in MMA

Il’Yaschenko, D. P., Chinakhov, D., Verkhoturova, E. V. & Mamadaliev, R., 1 Jan 2020, Solid State Phenomena. Trans Tech Publications Ltd, p. 32-38 7 p. (Solid State Phenomena; vol. 303).

Research output: Chapter in Book/Report/Conference proceedingChapter

Effect of ultra-disperse powder in electrode coating on properties of welds in MMA welding

Il’yaschenko, D. P., Chinakhov, D. A., Makarov, S. V., Danilov, V. I., Galinsky, A. A. & Verkhoturova, E. V., 1 Jan 2020, In : Engineering Solid Mechanics. 8, 1, p. 41-48 8 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

High-quality low-phosphorous manganese alloys for production of steel of low-temperature reliability

Nohrina, O. I., Rogihina, I. D., Golodova, M. A., Proshunin, I. E. & Valuev, D. V., 2020, Problems and Prospects for the Development of Materials Science. Saprykin, A. (ed.). Trans Tech Publications Ltd, p. 99-105 7 p. (Key Engineering Materials; vol. 839 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pore formation during laser welding in different spatial positions

Bernatskyi, A., Sydorets, V., Berdnikova, O., Krivtsun, I. & Chinakhov, D., 1 Jan 2020, Solid State Phenomena. Trans Tech Publications Ltd, p. 47-58 12 p. (Solid State Phenomena; vol. 303).

Research output: Chapter in Book/Report/Conference proceedingChapter

Preface

Chinakhov, D. A., 2020, In : Solid State Phenomena. 303, p. iv

Research output: Contribution to journalEditorial

Preparation and usage of high quality manganese-containing materials from ferroalloy production waste

Nohrina, O. I., Rogihina, I. D., Proshunin, I. E. & Valuev, D. V., 2020, Problems and Prospects for the Development of Materials Science. Saprykin, A. (ed.). Trans Tech Publications Ltd, p. 106-113 8 p. (Key Engineering Materials; vol. 839 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Segmentation Based on Propagation of Dynamically Changing Superpixels

Danilov, V. V., Gerget, O. M., Skirnevskiy, I. P., Manakov, R. A. & Kolpashchikov, D. Y., 1 May 2020, In : Programming and Computer Software. 46, 3, p. 195-206 12 p.

Research output: Contribution to journalArticle

Selective laser melting of magnesium

Saprykin, Sharkeev, Y. P., Saprykina, N. & Ibragimov, E. A., 2020, Problems and Prospects for the Development of Materials Science. Saprykin, A. (ed.). Trans Tech Publications Ltd, p. 144-149 6 p. (Key Engineering Materials; vol. 839 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Self-organization processes during deformation of nickel single crystals

Ekaterina, A. & Andrey, F., Jan 2020, In : Materials Characterization. 159, 110007.

Research output: Contribution to journalArticle

Open Access
Open Access
2019

Assessment of welding working properties of power supplies

Saraev, Y. N., Ilyashchenko, D. P., Krampit, M. A., Semenchuk, V. M. & Nepomnyashchiy, A. S., 22 Nov 2019, In : IOP Conference Series: Materials Science and Engineering. 681, 1, 012037.

Research output: Contribution to journalConference article

Open Access

Effect of pulse arc facing parameters with electrode wire pre-heating upon the beads formation

Krampit, M. A., Kuznetsov, M. A., Danilov, V. I., Krampit, A. G. & Shlyakhova, G. V., 19 Nov 2019, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020177. (AIP Conference Proceedings; vol. 2167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Kelvin-Helmholtz instability of swirling annular layer with heat and mass transfer

Mukesh, K. A., Sarychev, V. D., Nevskii, S. A., Kuznetsov, M. A., Solodsky, S. A., Chinakhov, D. A. & Krampit, M. A., 1 Jan 2019, In : Journal of Advanced Research in Dynamical and Control Systems. 11, 5, p. 86-96 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Laser Welding in Different Spatial Positions of T-joints of Austenitic Steel

Bernatskyi, A. V., Berdnikova, O. M., Klochkov, I. M., Sydorets, V. M. & Chinakhov, D. A., 17 Oct 2019, In : IOP Conference Series: Materials Science and Engineering. 582, 1, 012048.

Research output: Contribution to journalConference article

Open Access
2 Citations (Scopus)

Preface

Chinakhov, D. A., 17 Oct 2019, In : IOP Conference Series: Materials Science and Engineering. 582, 1, 011001.

Research output: Contribution to journalEditorial

Open Access

PREFACE

Chinakhov, D. A., 5 Feb 2019, In : IOP Conference Series: Earth and Environmental Science. 224, 1, 011001.

Research output: Contribution to journalEditorial

Open Access

Processing Behavior of Electrodes Made with Addition of Nanopowder

Makarov, S. V. & Chinakhov, D. A., 5 Feb 2019, In : IOP Conference Series: Earth and Environmental Science. 224, 1, 012015.

Research output: Contribution to journalConference article

Open Access

Simulation of the Reactivity of Energy Materials in the Technosphere

Rodzevich, A. P., Kuzmina, L. V., Gazenaur, E. G. & Krasheninin, V. I., 5 Feb 2019, In : IOP Conference Series: Earth and Environmental Science. 224, 1, 012018.

Research output: Contribution to journalConference article

Open Access

Structural and chemical analysis of 3d printed metal products

Kuznetsov, M., Zernin, E., Krampit, M., Danilov, V. & Shlyakhova, G., 15 Nov 2019, In : International Journal of Advanced Science and Technology. 28, 15, p. 699-709 11 p.

Research output: Contribution to journalArticle

Wear, vibration and acoustic emission characterization of sliding friction processes of coarse-grained and ultrafine-grained copper

Filippov, A. V., Tarasov, S. Y., Fortuna, S. V., Podgornykh, O. A., Shamarin, N. N. & Vorontsov, A. V., 15 Apr 2019, In : Wear. 424-425, p. 78-88 11 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)
2018

Acoustic emission as method of chatter detection in cutting

Shamarin, N. N., Filippov, A. V., Tarasov, S. Y., Podgornyh, O. A., Filippova, E. O. & Vorontsov, A. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020276

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Acoustic emission characterization of sliding wear under condition of direct and inverse transformations in low-temperature degradation aged Y-TZP and Y-TZP-AL2O3

Savchenko, N. L., Filippov, A. V., Tarasov, S. Y., Dmitriev, A. I., Shilko, E. V. & Grigoriev, A. S., 1 Sep 2018, In : Friction. 6, 3, p. 323-340 18 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Acoustic emission response to severe friction in deformation by cutting on metals and alloys

Shamarin, N. N., Filippov, A. V., Tarasov, S. Y., Filippova, E. O. & Vorontsov, A. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020275

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis and prediction of copper surface roughness obtained by selective laser melting

Saprykin, A. A., Saprykina, N. A. & Saprykin, A. A., 2 Nov 2018, In : IOP Conference Series: Materials Science and Engineering. 441, 1, 012044.

Research output: Contribution to journalConference article

Chip Formation in Constrained Cutting

Petrushin, S. I. & Gubaidulina, R. K., 1 Aug 2018, In : Russian Engineering Research. 38, 8, p. 645-650 6 p.

Research output: Contribution to journalArticle

Correlation between properties of oxide compounds formed on contact surfaces of cutting tools and cutting tool wear resistance

Nesterenko, V. P., Lasukov, A. A. & Retyunskiy, O. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 141-147 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Creation and Shaping of Three-Dimensional Ultrafine-Grain Materials

Filippov, A. V. & Filippova, E. O., 1 Jul 2018, In : Russian Engineering Research. 38, 7, p. 540-543 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Deformation relief on the surface of Hadfield steel single crystals, observed using a scratch test

Lychagin, D. V., Filippov, A. V., Kolubaev, A. V., Sizova, O. V. & Chumlyakov, Y. I., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., 020179. (AIP Conference Proceedings; vol. 2051).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dry sliding of Hadfield steel single crystal oriented to deformation by slip and twinning: Deformation, wear, and acoustic emission characterization

Lychagin, D. V., Filippov, A. V., Kolubaev, E. A., Novitskaia, O. S., Chumlyakov, Y. I. & Kolubaev, A. V., 1 Mar 2018, In : Tribology International. 119, p. 1-18 18 p.

Research output: Contribution to journalArticle

26 Citations (Scopus)

Dynamic behavior of friction ultrafine-grained AA5052

Filippov, A. V., Tarasov, S. Y., Podgornyh, O. A., Shamarin, N. N. & Filippova, E. O., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020087

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic of friction on ultrafine-grained Cu-Zn brass

Podgornyh, O. A., Filippov, A. V., Tarasov, S. Y., Fortuna, S. V., Shamarin, N. N. & Filippova, E. O., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020239

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamics of friction processes on Al-Zn-Mg-Cu alloy with coarse-grained or ultrafine-grained structure

Podgornyh, O. A., Filippov, A. V., Tarasov, S. Y., Shamarin, N. N. & Filippova, E. O., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020240

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamics of friction processes on stainless steel AISI 201 with coarse and ultrafine-grained structure

Vorontsov, A. V., Filippov, A. V., Tarasov, S. Y., Podgornyh, O. A., Shamarin, N. N. & Filippova, E. O., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020325

Research output: Chapter in Book/Report/Conference proceedingConference contribution

27 Citations (Scopus)

Effect of Inverter Power Source Characteristics on Welding Stability and Heat Affected Zone Dimensions

Il'Yaschenko, D. P., Chinakhov, D. A. & Mamadaliev, R. A., 7 Feb 2018, In : IOP Conference Series: Earth and Environmental Science. 115, 1, 012041.

Research output: Contribution to journalConference article

Open Access
4 Citations (Scopus)

Effect of Surface Layer Structural-Phase Modification on Tribological and Strength Properties of a TiC–(Ni–Cr) Metal Ceramic Alloy

Yu, B. H., Ovcharenko, V. E., Ivanov, K. V., Mokhovikov, A. A. & Zhao, Y. H., 1 May 2018, In : Acta Metallurgica Sinica (English Letters). 31, 5, p. 547-551 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effect of various heat sources on heating of contact tip during mig/mag welding

Kolmogorov, D. E., Solodsky, S. A., Gil, L. B. & Berg, V. I., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 106-111 6 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Energy parameters of weld formation process in MIG-MAG welding

Chinakhov, D. A., Solodskii, S. A., Rodionov, P. V. & Sydorets, V. N., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 99-105 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

How dynamic properties of inverters influence electrode metal transfer to the weld pool, and change structural and phase composition of joints produced via high alloyed electrodes

Il'Yaschenko, D. P., Chinakhov, D. A., Mamadaliev, R. A., Danilov, V. I. & Saranchin, A. A., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 93-98 6 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Improvement of research procedures into the highly rigid welded metal using thermal microscopy facilities

Malushin, N. N., Valuev, D. V., Il’Yaschenko, D. P., Gizatulin, R. A. & Nekrasov, R. Y., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 148-152 5 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

4 Citations (Scopus)

Influence of crystallographic symmetry on the self-organization of plastic deformation in [111] nickel single crystals

Alfyorova, E. A., Filippov, A. V. & Lychagin, D. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020008

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of thermal cycle effect on hardening of deposited high-speed metal

Solodsky, S. A., Malchik, A. G. & Valuev, D. V., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 153-160 8 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

7 Citations (Scopus)

Machining of titanium alloys with wave milling cutters

Korovin, G. I., Petrushin, S. I. & Gubaidulina, R. H., 1 Jan 2018, Materials and Processing Technology II. Chinakhov, D. A. & Chinakhov, D. A. (eds.). Trans Tech Publications Ltd, p. 79-85 7 p. (Materials Science Forum; vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Mathematical formula to determine geometrical dimensions of electrode metal droplets transferred with short circuits

Il’yaschenko, D. P., Chinakhov, D. A., Kirichenko, K. Y. & Sydorets, V. N., 1 Jan 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 1-6 6 p. (Materials Science Forum; vol. 938).

Research output: Chapter in Book/Report/Conference proceedingChapter

Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology

Chumaevskii, A. V., Khoroshko, E. S., Kalashnikov, K. N., Filippov, A. V. & Kalashnikova, T. A., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., 040015. (AIP Conference Proceedings; vol. 2053).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Microstructural, mechanical and acoustic emission-assisted wear characterization of equal channel angular pressed (ECAP) low stacking fault energy brass

Filippov, A. V., Tarasov, S. Y., Fortuna, S. V., Podgornykh, O. A., Shamarin, N. N. & Rubtsov, V. E., 1 Jul 2018, In : Tribology International. 123, p. 273-285 13 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Microstructure and tensile properties of Cu-Zn brass after severe plastic deformation

Tarasov, S. Y., Filippov, A. V., Fortuna, S. V. & Vorontsov, A. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., 020301. (AIP Conference Proceedings; vol. 2051).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Modification of structure and impact toughness of 17Mn1Si pipe steel welded joints by pulsed mechanical-electrophysical treatment

Vlasov, I. V., Stankevich, R. V., Smirnova, A. S., Yakovlev, A. V., Pochivalov, Y. I., Valuev, D. V. & Panin, S. V., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020319

Research output: Chapter in Book/Report/Conference proceedingConference contribution