Research Output 1993 2018

Filter
Conference contribution
1 Citation (Scopus)

Analysis of stress concentrators arising during MKY.2SH-26/53 support unit testing

Burkov, P. V., Burkova, S. P. & Timofeev, V. Y., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 216-223 8 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer simulation
Testing
14 Citations (Scopus)

An investigation into autobalancing devices with multireservoir system

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012014

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Rotors
Liquids
1 Citation (Scopus)

Automatic balancing time of any rotors at full speed

Pashkov, E. N., Bogdan, A. M. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 886-891 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
Differential equations

Bionic structural design as a promising way of increasing the mechanical characteristics of the surface layers of metal-ceramic composites

Konovalenko, I. S. & Shilko, E. V., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., 030027. (AIP Conference Proceedings; vol. 2053).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
bionics
cermets
structural design
surface layers
composite materials
17 Citations (Scopus)

Bronze sealing rings defects and ways of its elimination

Martyushev, N. V. & Pashkov, E. N., 2013, Applied Mechanics and Materials. Vol. 379. p. 82-86 5 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bronze
Casting
Defects
Porosity
Tin

Calculation of stresses arising in a pipeline under buckling in soft ground

Burkov, P., Burkov, V. & Burkova, S., 1 Jan 2018, Micro and Nano Technologies, Space Technologies and Planetary Science. 1.4 ed. International Multidisciplinary Scientific Geoconference, p. 275-282 8 p. (International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM; vol. 18, no. 1.4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

buckling
Buckling
Pipelines
Soils
Submarine pipelines
1 Citation (Scopus)

Computer-aided study of key factors determining high mechanical properties of nanostructured surface layers in metal-ceramic composites

Konovalenko, I. S., Shilko, E. V., Ovcharenko, V. E. & Psakhie, S. G., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cermets
surface layers
mechanical properties
strain hardening
cellular automata

Computer-aided study of the mechanical behavior of the porous ceramic based composite with plastic pore filler

Konovalenko, I. S., Shilko, E. V. & Sharkeev, Y. P., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., Vol. 2051. 020130

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fillers
plastics
ceramics
porosity
composite materials

Computer simulation of oil and gas flow line stress-strain behavior

Burkov, P., Burkov, V. & Burkova, S., 1 Jan 2018, Micro and Nano Technologies, Space Technologies and Planetary Science. 1.4 ed. International Multidisciplinary Scientific Geoconference, p. 343-350 8 p. (International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM; vol. 18, no. 1.4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

gas flow
computer simulation
Flow of gases
Pipelines
oil
5 Citations (Scopus)

Conjugate heat transfer in the interaction of the viscous liquid with technological elements of energy systems in conditions of their internal contour moving

Krainov, A. V., Pashkov, E. N. & Ponomaryov, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 876-880 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer
Fluids
Liquids
Hydrodynamics
Temperature distribution
2 Citations (Scopus)

Designing the ejector pellet impact drill bit for hard and tough rock drilling

Kovalyov, A. V., Ryabchikov, S. Y., Isaev, Y. D., Aliev, F. R., Gorbenko, M. V. & Strelnikova, A. B., 2015, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 24. 012016

Research output: Chapter in Book/Report/Conference proceedingConference contribution

drill bit
drilling
rock

Development of clean air strategy in Tomsk

Panin, V. F. & Shramov, D. M., 2005, Proceedings - 9th Russian-Korean International Symposium on Science and Technology, KORUS-2005. Vol. 1. p. 252-255 4 p. 1507702

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quality management
Air quality
Monitoring
Air

Development of the noncontact approach to testing the dynamic characteristics of carbon fiber reinforced polymer composites

Krasnoveikin, V. A. & Konovalenko, I. S., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., 040048. (AIP Conference Proceedings; vol. 2053).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
carbon fibers
vibration effects
dynamic characteristics
composite materials
polymers
18 Citations (Scopus)

Differential equations of processes for the hydropuls power mechanism of drill machines

Pashkov, E. N., Zijakaev, G. R. & Tsygankova, M. V., 2013, Applied Mechanics and Materials. Vol. 379. p. 91-94 4 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Differential equations
Hydraulics

Effect of the features of functionalized structure on elastic properties and strength of partially-filled brittle porous materials

Konovalenko, I. S., Shilko, E. V., Konovalenko, I. S. & Vodopjyanov, E. M., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Psakhie, S. G., Fomin, V. M. & Panin, V. E. (eds.). American Institute of Physics Inc., 020098. (AIP Conference Proceedings; vol. 1783).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

proportional limit
porous materials
elastic properties
porosity
shear strength

Effect of the inductive parameter of mechatronic system on elastic element longitudinal vibrations

Tomilin, A. K. & Prokopenko, E. V., 1 Jan 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986861

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechatronics
Inductance
Magnets
Magnetic fields
1 Citation (Scopus)

Efficiency of balancing by liquid-type automatic balancing devices

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 858-863 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquids
Rotors
Bearings (structural)
1 Citation (Scopus)

Evaluation of gravitational force effect on balancung processes in liquid-type autobalancing devices

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 642-645 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquids
Angular velocity
Gravitation
Hydrodynamics
Friction

Experimental-theoretical investigation of elastic wave distribution in carbon composites

Krasnoveikin, V. A. & Konovalenko, I. S., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., 020144. (AIP Conference Proceedings; vol. 2051).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

elastic waves
composite materials
carbon
defects
quality control

Exposing static indeterminacy of dimensioned gear with packing rolling element

Ivkina, O. P., I-Kan, A., Cheremnov, A. V. & Pashkov, E. N., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357717

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Separators
Indeterminacy

FEM analysis of soil-pipe interaction

Burkov, V., Chun, W., Burkov, V. & Burkova, S., 21 Jul 2017, International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2016. American Institute of Physics Inc., Vol. 1863. 560027

Research output: Chapter in Book/Report/Conference proceedingConference contribution

soils
interactions
buckling
computer programs
2 Citations (Scopus)

Finite Element Model of Trenchless Pipe Laying

Burkov, P. V., Burkova, S. P. & Kravchenko, A. N., 14 Sep 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 91. 012052

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipelines
Pipe

Four-dimensional electromagnetic field theory

Tomilin, A. K., 22 May 2017, 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. Chew, W. C., He, S. & He, S. (eds.). Electromagnetics Academy, p. 1414-1420 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromagnetic field theory
Magnetic fields
Vortex flow
Electrodynamics
Charged particles
1 Citation (Scopus)

Friction influence on the accuracy of the rotors automatic balance

Ziyakaev, G. R., Gorbenko, M. V., Gorbenko, T. I. & Ivkina, O. P., 1 Jan 2016, High Technology: Research and Applications, 2015. Martyushev, N. & Bogdan, A. (eds.). Trans Tech Publications Ltd, p. 441-444 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Rotors
Friction
Pendulums
5 Citations (Scopus)

Heat and mass transfer in viscous fluid flows in open cavities with moving boundaries under cooling the external contour

Krainov, A. V., Pashkov, E. N. & Yurovskiy, P. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 638-641 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow of fluids
Mass transfer
Hydrodynamics
Heat transfer
Cooling
4 Citations (Scopus)

Hydrodynamics and heat transfer in the coolant flows in the elements of the technical designs of industrial systems

Krainov, A. V., Pashkov, E. N., Lushnikov, R. E. & Arkhipov, V. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 280-283 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical elements
Coolants
Hydrodynamics
Heat transfer
Liquids

Hypothesis of the electromagnetic nature of inertia and gravity

Tomilin, A. K., Misiucenko, I. L. & Vikulin, V. S., 22 May 2017, 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. Chew, W. C., He, S. & He, S. (eds.). Electromagnetics Academy, p. 1101-1108 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Charged particles
Gravitation
Vacuum
Electrons
Permittivity
1 Citation (Scopus)

Improvement of optical systems for detection of smokes

Panin, V. F. & Dashkovskii, A. G., 23 Apr 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 81. 012115

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Smoke
Optical systems
Smoke detectors
Photodetectors
Aerosols
1 Citation (Scopus)

Influence of tool shape on lattice rearrangement under loading conditions reproducing friction stir welding

Konovalenko, I. S. & Konovalenko, I. S., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020090. (AIP Conference Proceedings; vol. 1683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
crystallites
embedded atom method
angular velocity
aluminum alloys

Influence of vibrational treatment on thermomechanical response of material under conditions identical to friction stir welding

Konovalenko, I. S., Konovalenko, I. S., Dmitriev, A. I., Psakhie, S. G. & Kolubaev, E. A., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
vibration
welding
dynamic models
molecular dynamics

Investigation of dynamic characteristics of carbon composites by laser Doppler vibrometry

Krasnoveikin, V. A. & Konovalenko, I. S., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., 040047. (AIP Conference Proceedings; vol. 2053).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
dynamic characteristics
loading rate
damping
vibration
composite materials
1 Citation (Scopus)

Justifying a method of balancing crank-and-rod mechanism of mining roadheader

Burkov, P. V., Burkova, S. P. & Timofeev, V. Y., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 270-275 6 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Mass transfer at atomic scale in md simulation of friction stir welding

Konovalenko, I., Konovalenko, I., Dmitriev, A., Psakhie, S. & Kolubaev, E., 1 Jan 2016, Multifunctional Materials: Development and Application. Trans Tech Publications Ltd, p. 626-631 6 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Mass transfer
Atoms
Crystallites
Molecular dynamics

Mathematical modeling in concept designing of bionic objects

Sokolov, A., Kukhta, M. & Solovev, R., 19 Feb 2016, Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Institute of Electrical and Electronics Engineers Inc., 7414921

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bionics
Mathematical Modeling
Stairs
Design Method
Concepts
1 Citation (Scopus)

Mathematical simulation of hydraulic power pulse machine at matlab

Novoseltseva, M. V., Pashkov, E. N. & Masson, I. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 240-243 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulics
Mathematical models

Methodological approach to the study of a dynamic response of carbon composites to nonstationary impacts based on the use of laser Doppler vibrometry and computer modeling

Krasnoveikin, V. A. & Konovalenko, I. S., 12 Dec 2018, Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Fomin, V. M., Panin, V. E. & Psakhie, S. G. (eds.). American Institute of Physics Inc., 020145. (AIP Conference Proceedings; vol. 2051).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

dynamic response
elastic waves
composite materials
carbon
lasers
5 Citations (Scopus)

Modern technologies of decorative surface treatment

Sokolov, A. P., Kukhta, M. S. & Pelevin, E. A., 15 Dec 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986951

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface treatment
Product design
Processing
6 Citations (Scopus)

Modifications of the mathematical crisher model for effective moduli of two-component elastic isotropic composite

Svetashkov, A. A., Kupriyanov, N. A. & Manabaev, K. K., 1 Jan 2016, High Technology: Research and Applications, 2015. Martyushev, N. & Bogdan, A. (eds.). Trans Tech Publications Ltd, p. 206-210 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical models
Composite materials
Thermal conductivity
Mechanics
11 Citations (Scopus)

Molecular dynamics modeling of bonding two materials by atomic scale friction stir welding

Konovalenko, I. S., Konovalenko, I. S. & Psakhie, S. G., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020092

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
butt joints
molecular dynamics
welding
vibration
9 Citations (Scopus)

Molecular dynamics modeling of bonding two materials by atomic scale friction stir welding at different process parameters

Konovalenko, I. S. & Psakhie, S. G., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020093

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
molecular dynamics
crystallites
mass transfer
heating

Numerical study of deformation and fracture of ceramics nanocomposite with different structural parameters under mechanical loading

Konovalenko, I. S., Vodopjyanov, E. M. & Shilko, E. V., 1 Jan 2016, Multifunctional Materials: Development and Application. Kurzina, I. & Godymchuk, A. (eds.). Trans Tech Publications Ltd, p. 601-608 8 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanocomposites
Composite materials
Cellular automata
Zirconium
Phase transitions
4 Citations (Scopus)

On dependence of mechanical properties of brittle material on partial concentrations of different sized pores in its structure in a wide range of porosity

Konovalenko, I. S., Smolin, A. Y. & Psakhie, S. G., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020089

Research output: Chapter in Book/Report/Conference proceedingConference contribution

brittle materials
mechanical properties
porosity
porous materials
cellular automata

Optimization of production and consumption waste treatment in Tomsk Polytechnic University

Juriy, F., Vladimir, I. & Olga, R., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357516

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Waste treatment
7 Citations (Scopus)

Research of stress-deformed state of main gas-pipeline section in loose soil settlement

Burkov, P., Kalmykova, K., Burkova, S. & Tien, D. T. T., 2014, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 21. 012039

Research output: Chapter in Book/Report/Conference proceedingConference contribution

gas pipeline
software
soil
analysis

Role of sublayers in mechanical response of pulsed electron beam irradiated surface layers to contact load

Konovalenko, I. S., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Psakhie, S. G., Panin, V. E. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020090. (AIP Conference Proceedings; vol. 1909).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

contact loads
surface layers
electron beams
cermets
cellular automata
1 Citation (Scopus)

Side milling capability of rock cutting tools

Mokhnachevskiy, A. A., Pashkov, E. N. & Azhel, Y. P., 15 Dec 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986957

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cutting tools
Drilling
Rocks
Directional drilling
Gases
6 Citations (Scopus)

Simulation of pipeline in the area of the underwater crossing

Burkov, P., Chernyavskiy, D., Burkova, S. & Konan, E. C., 2014, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 21. 012037

Research output: Chapter in Book/Report/Conference proceedingConference contribution

oil pipeline
durability
competitiveness
computer simulation
simulation

Some features of software education for ecological students

Guzeeva, T. N. & Panin, V. F., 2005, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 3. p. 303 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Education
Availability
Students

Spectral problem in a generalized theory of electromagnetic waves

Islamov, G. G. & Tomilin, A. K., 22 May 2017, 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. Chew, W. C., He, S. & He, S. (eds.). Electromagnetics Academy, p. 462-466 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromagnetic waves
Electromagnetic fields
Elasticity
Vortex flow
Vacuum
1 Citation (Scopus)

Stationary rotation of the partially liquid-filled unbalanced rotor under external friction force action

Pashkov, E. N., Martyushev, N. V. & Yurovsky, P. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 903-906 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
Friction
Liquids
Angular velocity
Mathematical models