Research Output

Filter
Conference contribution
2001

Transients of rotation system with autobalancer filled with liquid

Pashkov, E. N., Nesterenko, V. P. & Pashkova, T. V., 2001, Proceedings of the 7th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2001. Institute of Electrical and Electronics Engineers Inc., p. 77-78 2 p. 983741

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2004

The acidity influence of solid wastes carbonfluoride production of sicp on products strength

Tsygankova, T. S. & Fedorchuk, Y. M., 2004, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 2. p. 88-89 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The research of achinsk sulphatcalcium terriconium reological characteristic

Fedorchuk, Y. M., Zykova, N. S. & Guzeeva, T. N., 2004, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 1. p. 333-334 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Towards the issue of atmospheric air quality improvement strategy in tomsk

Panin, V., Popov, V., Dashkovsky, A., Osipova, N. & Dashkovskaia, A., 2004, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 1. p. 356-357 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2005

Development of clean air strategy in Tomsk

Panin, V. F. & Shramov, D. M., 2005, Proceedings - 9th Russian-Korean International Symposium on Science and Technology, KORUS-2005. Vol. 1. p. 252-255 4 p. 1507702

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Some features of software education for ecological students

Guzeeva, T. N. & Panin, V. F., 2005, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. Vol. 3. p. 303 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ways of optimization of plain gearing

Belyaev, D. V., I-Kan, A. & Morozov, G. M., 27 Dec 2005, 8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004. p. 15-16 2 p. (8th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2004; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

The system improvement of the atmospheric air quality monitoring

Shelestov, A. A., Panin, V. F., Filatov, A. U. & Shramov, D. M., 2008, Proceedings of IFOST-2008 - 3rd International Forum on Strategic Technologies. p. 676-678 3 p. 4603013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Exposing static indeterminacy of dimensioned gear with packing rolling element

Ivkina, O. P., I-Kan, A., Cheremnov, A. V. & Pashkov, E. N., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357717

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Optimization of production and consumption waste treatment in Tomsk Polytechnic University

Juriy, F., Vladimir, I. & Olga, R., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357516

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The multipurpose use of industrial wastes in the process of producing anhydrite construction materials

Fedorchuk, Y. M., Zykova, N. S. & Mikheev, V. N., 2012, Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 6357524

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2013

Bronze sealing rings defects and ways of its elimination

Martyushev, N. V. & Pashkov, E. N., 2013, Applied Mechanics and Materials. Vol. 379. p. 82-86 5 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Differential equations of processes for the hydropuls power mechanism of drill machines

Pashkov, E. N., Zijakaev, G. R. & Tsygankova, M. V., 2013, Applied Mechanics and Materials. Vol. 379. p. 91-94 4 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

18 Citations (Scopus)

Tribotechnical properties lead bronzes

Martyushev, N. V. & Pashkov, E. N., 2013, Applied Mechanics and Materials. Vol. 379. p. 87-90 4 p. (Applied Mechanics and Materials; vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)
2014

Analysis of stress concentrators arising during MKY.2SH-26/53 support unit testing

Burkov, P. V., Burkova, S. P. & Timofeev, V. Y., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 216-223 8 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An investigation into autobalancing devices with multireservoir system

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012014

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Automatic balancing time of any rotors at full speed

Pashkov, E. N., Bogdan, A. M. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 886-891 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Conjugate heat transfer in the interaction of the viscous liquid with technological elements of energy systems in conditions of their internal contour moving

Krainov, A. V., Pashkov, E. N. & Ponomaryov, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 876-880 5 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Effect of the inductive parameter of mechatronic system on elastic element longitudinal vibrations

Tomilin, A. K. & Prokopenko, E. V., 1 Jan 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986861

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Efficiency of balancing by liquid-type automatic balancing devices

Pashkov, E. N., Martyushev, N. V. & Ponomarev, A. V., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 858-863 6 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of gravitational force effect on balancung processes in liquid-type autobalancing devices

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 642-645 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Heat and mass transfer in viscous fluid flows in open cavities with moving boundaries under cooling the external contour

Krainov, A. V., Pashkov, E. N. & Yurovskiy, P. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 638-641 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Justifying a method of balancing crank-and-rod mechanism of mining roadheader

Burkov, P. V., Burkova, S. P. & Timofeev, V. Y., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 682. p. 270-275 6 p. (Applied Mechanics and Materials; vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Modern technologies of decorative surface treatment

Sokolov, A. P., Kukhta, M. S. & Pelevin, E. A., 15 Dec 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986951

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Research of stress-deformed state of main gas-pipeline section in loose soil settlement

Burkov, P., Kalmykova, K., Burkova, S. & Tien, D. T. T., 2014, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 21. 012039

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Side milling capability of rock cutting tools

Mokhnachevskiy, A. A., Pashkov, E. N. & Azhel, Y. P., 15 Dec 2014, Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014. Institute of Electrical and Electronics Engineers Inc., 6986957

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Simulation of pipeline in the area of the underwater crossing

Burkov, P., Chernyavskiy, D., Burkova, S. & Konan, E. C., 2014, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 21. 012037

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Stationary rotation of the partially liquid-filled unbalanced rotor under external friction force action

Pashkov, E. N., Martyushev, N. V. & Yurovsky, P. G., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1040. p. 903-906 4 p. (Advanced Materials Research; vol. 1040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

The influence of glass and metal properties on the peculiarities of an item of art's shaping in ethnostyle

Kukhta, M. S., Kazmina, O., Sokolov, A., Arventyeva, N., Soroka, A., Homushku, O., Zaitseva, S. & Sergeyeva, M., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012046

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Vessel ellipticity and eccentricity effect on automatic balancing accuracy

Pashkov, E. N., Martyushev, N. V. & Masson, I. A., 2014, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 66. 012011

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)
2015

Designing the ejector pellet impact drill bit for hard and tough rock drilling

Kovalyov, A. V., Ryabchikov, S. Y., Isaev, Y. D., Aliev, F. R., Gorbenko, M. V. & Strelnikova, A. B., 2015, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 24. 012016

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Finite Element Model of Trenchless Pipe Laying

Burkov, P. V., Burkova, S. P. & Kravchenko, A. N., 14 Sep 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 91. 012052

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improvement of optical systems for detection of smokes

Panin, V. F. & Dashkovskii, A. G., 23 Apr 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 81. 012115

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of tool shape on lattice rearrangement under loading conditions reproducing friction stir welding

Konovalenko, I. S. & Konovalenko, I. S., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. Panin, V. E., Psakhie, S. G. & Fomin, V. M. (eds.). American Institute of Physics Inc., 020090. (AIP Conference Proceedings; vol. 1683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of vibrational treatment on thermomechanical response of material under conditions identical to friction stir welding

Konovalenko, I. S., Konovalenko, I. S., Dmitriev, A. I., Psakhie, S. G. & Kolubaev, E. A., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On dependence of mechanical properties of brittle material on partial concentrations of different sized pores in its structure in a wide range of porosity

Konovalenko, I. S., Smolin, A. Y. & Psakhie, S. G., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020089

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Stress and Strain State Analysis of Defective Pipeline Portion

Burkov, P. V., Burkova, S. P. & Knaub, S. A., 14 Sep 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 91. 012055

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Structure-phase state and mechanical properties of surface layers in titanium nikelide single crystals after shock mechanical treatment

Surikova, N., Panin, V., Vlasov, I., Narkevich, N., Surikov, N. & Tolmachev, A., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020223

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The formation of gradient submicrocrystalline structure at nickel surface layers under ultrasonic impact treatment

Panin, V., Kuznetsov, P., Pochivalov, Y., Belyaeva, I., Rakhmatulina, T. & Shumakova, D., 27 Oct 2015, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures. American Institute of Physics Inc., Vol. 1683. 020176

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Effect of the features of functionalized structure on elastic properties and strength of partially-filled brittle porous materials

Konovalenko, I. S., Shilko, E. V., Konovalenko, I. S. & Vodopjyanov, E. M., 10 Nov 2016, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Psakhie, S. G., Fomin, V. M. & Panin, V. E. (eds.). American Institute of Physics Inc., 020098. (AIP Conference Proceedings; vol. 1783).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction influence on the accuracy of the rotors automatic balance

Ziyakaev, G. R., Gorbenko, M. V., Gorbenko, T. I. & Ivkina, O. P., 1 Jan 2016, High Technology: Research and Applications, 2015. Martyushev, N. & Bogdan, A. (eds.). Trans Tech Publications Ltd, p. 441-444 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hydrodynamics and heat transfer in the coolant flows in the elements of the technical designs of industrial systems

Krainov, A. V., Pashkov, E. N., Lushnikov, R. E. & Arkhipov, V. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 280-283 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Mass transfer at atomic scale in md simulation of friction stir welding

Konovalenko, I., Konovalenko, I., Dmitriev, A., Psakhie, S. & Kolubaev, E., 1 Jan 2016, Multifunctional Materials: Development and Application. Trans Tech Publications Ltd, p. 626-631 6 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Mathematical modeling in concept designing of bionic objects

Sokolov, A., Kukhta, M. & Solovev, R., 19 Feb 2016, Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Institute of Electrical and Electronics Engineers Inc., 7414921

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mathematical simulation of hydraulic power pulse machine at matlab

Novoseltseva, M. V., Pashkov, E. N. & Masson, I. A., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 685. p. 240-243 4 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Modifications of the mathematical crisher model for effective moduli of two-component elastic isotropic composite

Svetashkov, A. A., Kupriyanov, N. A. & Manabaev, K. K., 1 Jan 2016, High Technology: Research and Applications, 2015. Martyushev, N. & Bogdan, A. (eds.). Trans Tech Publications Ltd, p. 206-210 5 p. (Key Engineering Materials; vol. 685).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Numerical study of deformation and fracture of ceramics nanocomposite with different structural parameters under mechanical loading

Konovalenko, I. S., Vodopjyanov, E. M. & Shilko, E. V., 1 Jan 2016, Multifunctional Materials: Development and Application. Kurzina, I. & Godymchuk, A. (eds.). Trans Tech Publications Ltd, p. 601-608 8 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of localized plastic deformation of stainless steel electrically saturated with hydrogen

Barannikova, S., Bochkareva, A., Lunev, A., Li, Y. & Zuev, L., 13 Oct 2016, Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists. American Institute of Physics Inc., Vol. 1772. 030011

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of plastic flow of aluminum alloy using digital speckle photography

Bochkareva, A. V., Lunev, A. G., Barannikova, S. A. & Zuev, L. B., 2016, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 683. p. 118-124 7 p. (Key Engineering Materials; vol. 683).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Computer-aided study of key factors determining high mechanical properties of nanostructured surface layers in metal-ceramic composites

Konovalenko, I. S., Shilko, E. V., Ovcharenko, V. E. & Psakhie, S. G., 1 Dec 2017, Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. American Institute of Physics Inc., Vol. 1909. 020091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)